I want to make a panoramic picture to say something like 20"x10" using cs3, when i go to upload it to a printing company i.e. photo box, the image always appears smaller.
I have tried using Genumne Fractals 5 but i do not seem to get any luck there either.
What i need is a complete idiot`s guide on how to create and print succesfully a panoramic image.
I recently made a poster which was taken to the printers, the printer said that my file was not the correct size, i had made the image to the A1 dimensions but when it printed it was much smaller on the page, they said the file wasnt the right dimensions but they can stretch it to fit, so what is wrong, is there another setting i should have used because i thought if you made the picture to the A1 dimension or to any dimension you wanted then it would print in that size?
View 2 Replies View RelatedWhen printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper.
If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before.
So in CS5 we were able to print to the custom sizes we created in the print screen for our HP Z3200, but for some reason we haven't been able to use the custom sizes in CS6, you click on a custom size and when you say ok from the printer settings and it goes back into Photoshop print settings it binks back to 8.5x11. You can use the standard sizes that came with the HP print software, but not any custom sizes you create. Is there a setting somewhere in Photoshop that I need to change?
View 4 Replies View RelatedI am using CorelDraw X4 and I am having problems printing exact sizes. The printer I am using is the HP designjet Z6100 (42 inch). Recently I tried to print a sign that needed to be exactly 17inches but it came out 16.5inches. When I clicked on the image it said that it was 17inches, but does not print correctly.
View 2 Replies View RelatedWe are looking for an easy straightforward way to print / export an entire set of sheets to pdf.The sheets have different papersizes and we want them to be named with the sheet number + name, and possible a prefix by choice.We have Adobe Acrobat X installed as pdf printer.So far we managed to print an entire set to pdf with these somewhat annoying issues:
1. The naming adds the word "sheet" between the chosen prefix and number-name.can we get rid of this?
2. The prints seem only to follow the actual Revit Print-setup, on papersizes.Which means that we need to have print-sessions on every paper size used in a project.Strange that in Revit the paper print-setup, doesnt follow the sheet definitions.(?)Is there a way within Revit to solve this to a more automated workflow?Or do we have to implement third party plugiins / solutions?
I scanned a photo in to be edited, once I edited it when it comes to printing it wont come out the same size. My printing options are all about different frame sizes to put the photo into.
So I tried creating a new document where I set the size in centimetres, but when it comes to print how come I cant seem to get the option to print that size.
I'm working at a screen shop, printing .ps files for film. Most of the art is provided from the client on seperate artboards of varying size. In the print dialog box I select "custom" from media size options. This sets my page size to the size of the selected artboard. The problem is each page needs to be a different size so I am forced to print each page one at a time. Is there a way for illustrator to change the media size per artboard?
View 1 Replies View RelatedI tend to always have a few pictures in rotation that I end up cropping multiple times when I am printing. Pictures where today I need to print a 4x6 and tomorrow it's a 5x7 of the same picture, etc. I am trying to figure out a way to save the file with that cropping. Ideally there would be a way that if I also modified anything else in the image that would also show up in the other versions. I know there is Create Virtual Copy, and that could work if I could then figure out how to change the file name so it would show that it was cropped for 5x7 or whatever.
View 3 Replies View RelatedI have a dvd box cover insert that I am trying to print 10.531 x 7.25. I set up the page and when I go to print it, it prints too small and doesn't fit in the dvd box property. I've tried printing on letter, legal and 11x17 to no avail it always comes out to 9.75 x 6.25
View 9 Replies View RelatedI know a landscape can be stretched into a panoramic in CS4 but, where to find the tools & how to do it.
View 9 Replies View Relatedi tried to use polar coordinates, but as you get to the outer part of the circle, you see that the picture spreads and you get that blur to it. i want to know how you make it go out from the center and not get that side effect.
View 4 Replies View RelatedI have a question about using Panoramic. I shot a quick 3 pics I wanted to stitch together. I was wondering if there is a manual way to stitch them together?
I used Bridge>Tools> Photshop.PhotoMerge>Reposition and Auto ~ Ended up with this. (see pic) I would like to stitch these together if possible. I am practicing for making Environment layers in After Effects.
The attached panorama is a composite of 4 other images. I am very satisfied with the overall result since there is a minimum of distortion and the color is more than decent. I am not satisfied with the two gray triangles that are in the center of the image. What would be the best way to get rid of those shadows? Is it possible to adjust the images prior to making the panorama which would reduce or eliminate those gray triangles. I should point out that the 4 images used were "perfect" without any gray areas.
View 9 Replies View RelatedI have a problem with a couple of photos that I want to stitch
for a panoramic.
The picture I have attached shows how one or both of the images
need adjusting so that their exposures 'match'
I have stitched together some photos from my Canon digital camera using the bundled software to get a panorama photo in jpeg format (the photos were taken in panorama mode on the camera). Now I want to do something seemingly simple: split up the huge created image (14251 x 1596) into handy 6x4 chunks so I can upload them to ofoto (or whatever) and get them printed as cheap 6x4 prints that I can paste together on my wall. So for 6x4 I'd like to split it into 2394 x 1596 images at the original quality (with the last image in the set being padded with white so it matches the other slices in height). I've tried using the slice tool in photoshop 7.0 but there there are 2 problems: a max slice width of 1000 pixels and Image Ready only allows creating a useless gif file. Any ideas (apart from writing the tool myself in Java or C)?
View 2 Replies View RelatedI have been tasked with creating a time lapse video of a building being built. I have been supplied with the time lapse pictures that go back over 18 months so there are a large number of files.
The problem I have is the pictures were taken by a motorized web cam - basically it took a picture to the left, move about 40 degrees take a picture straight then another 40 degrees and took a picture right to fit the whol building in. 3 shots were taken a minute so for every minute there is the whole building.
When initially looking at the 3 seperate shots it looks like it would be fine for them to line up BUT there is a problem. The left and middle pictures have a small amount of overlap and can be automatically stiched together BUT the picture on the right will but up but has no overlap, is there anyway I can automate 2 different functions on the 3 pictures or do a 2 step automation that would firstly stitch the left and middle pic then but up the right pic to the joined images already stitched.
Trying to figure out how to create 3d 360 degree spherical panoramic. All my searches come up with older versions. CS6 does not have the 3d menu so where do I find out how?
View 6 Replies View RelatedTo resize an image like a panoramic television. The center is resized little, and the edges more. The image will appears distorted less than with the traditional method.
View 9 Replies View Relatedafter saving my panoramic the file format is not compatible with Lightroom or any other photosoftware,
View 4 Replies View RelatedI am trying to make a panaromoc photo. when i go to "file" "new" "Panaromic" Elements shuts down. what should I do?
View 10 Replies View RelatedI frequently use Photoshop CC to create panoramic images with Photomerge. I've found that as soon as I start the Photomerge process, my computer becomes absurdly slow. I'm not terribly surprised by this - my primary issue is that the computer remains insanely slow long after I've closed Photoshop CC. The only solution I've found is to restart the computer. Even this can be difficult, because the computer becomes slow enough that it takes minutes to shut down.
I want to make a point clear here: I'm not complaining about how my computer becomes slow while using Photomerge. I believe this is to be expected on a laptop such as this. The problem is that my otherwise fast computer becomes wildly slow even after I'm done and Photoshop is closed. Photoshop seems to run just fine otherwise.
I'm using an otherwise problem-free 15'' Macbook Pro with Mountain Lion (10.8.4). Computer specs: 2.2 GHz Intel Core i7, 8 GB 1333 MHz DDR3 RAM, Intel HD Graphics 3000 (512 MB). I currently have memory usage set to 80% under performance preferences.
I am facing problems while 'stitching' the panoramic photos that i shot. basically, Photoshop's File>Automate>Photomerge and Edit>Auto Align/Blend Layers works good, but FAIL on the LENS DISTORTION.
i had tried to correct it with Filter>Lens Correction, but still not getting perfect result. see the attached image for the results, were you can see the building looks bent. check/download the source images from [URL]......
I have a panoramic picture made up of three photos and i need some tips on how to get rid of the faint lines visible from where the three photos join.
you can see this in the attached image. under the big rock and in the sky on the right.
I have a Epson R2880 and want to print a series of panoramic prints on it, i have set up the print to be 8x24 inches. When I open the panoramic and give it the size of the paper, CS3 automatically resizes the print, so if i set the image to 8x24 the height of the actual picture is either 8x40 or 3.78x24 .... is there a way to get a real 8x24 print or will CS3 always resize to a fixed set of dimensions ?
View 2 Replies View Relatedwhy is the enhance panoramic merge is grayed out on my recent purchase and download of elements 11 photoshop & the premiere 11
View 11 Replies View RelatedI am using Elements 10 with Windows 8. When I select panoramic merge, the software closes down and I get an error message saying that its encountered a problem and closing dow.
View 1 Replies View RelatedI am try to stitch portrait style shots on a panoramic view but it always set up as a landscape image I have used LR4 and bridge with no success. All my landscape style images are ok with no issues. Is it how im taking the pictures or is there a setting to use to set for landscape or portrait.
View 3 Replies View RelatedThis is a photoshop request. I have a set of scenic photos I'd like stitched/blended together. The idea is to get the one panoramic image, and then make it into a poster.
View 9 Replies View RelatedHow to accomplish a special corner treatment. I'm working with very large panoramic files, that frequently have portions of roof top or other obstruction in the corners. I'm looking to try an effect that is a page curl, but more exaggerated than the typical "Warp/Shadow" effect I've used. I would like the curl to be a cone shaped spiral. I am working with VERY high resolution files (very large), so I should have a lot of detail to use in the edge of the curl.
View 8 Replies View RelatedHow to use a 360 panoramic image as a background in 3ds max. Each time I have tried it, the background image appears too close to the camera, making my objects look small. No matter how big the image is in pixel dimensions, it always appear too large in the viewport; there's no setting in 3ds max to scale it back so that it looks farther away from the camera. I seen ones that use a background image and use camera matching to line up the camera, but I need to have the background setup so that it does not matter where the camera is pointing.
View 3 Replies View Related