Photoshop :: How To Accomplish Special Corner Treatment - Large Panoramic Files
Nov 2, 2012
How to accomplish a special corner treatment. I'm working with very large panoramic files, that frequently have portions of roof top or other obstruction in the corners. I'm looking to try an effect that is a page curl, but more exaggerated than the typical "Warp/Shadow" effect I've used. I would like the curl to be a cone shaped spiral. I am working with VERY high resolution files (very large), so I should have a lot of detail to use in the edge of the curl.
View 8 Replies
ADVERTISEMENT
Aug 9, 2013
i have line in the drawing that exists on layer A-Wall it has different lineweight 0.05 from true wall. Now usually my routine : i select this line and then select similar to convert it to layer glazing.
i need lisp that by one command convert the objects on layer A-wall with layer 0.05 only to glazing.
View 9 Replies
View Related
Jun 9, 2011
I'm certain there is a way to accomplish a "feathering" operation in Paint.Net, I just cannot find it. I am looking for details on exactly how to remove rough edges from some photos that I have cut out. It may be called softening instead of feathering.
View 6 Replies
View Related
Aug 29, 2012
how do i open pdf special edition files in Corel X4? i can view it as a pdf but I can't get it into corel to see it's dimensions or anything.
ps. haven't been here for quite a while. guess it's a good thing I haven't had a bunch of questions as usual
View 2 Replies
View Related
Aug 28, 2013
I work with textiles and have to deal with fabric texture and wrinkles in Photoshop. The workflow involves applying a guggasin blur, grain and motion blur. This produces an acceptable result which is not realistic. Sometimes I use the mezzotine filter to reintroduce the fabric texture lost during the blurring. additional recommendations to deal with fabric wrinkles?
View 2 Replies
View Related
Jun 6, 2012
I have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
View 3 Replies
View Related
Mar 29, 2012
I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG. They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG. NEF files I convert from my Nikon D2x are around 9.5MB. I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
View 7 Replies
View Related
Jun 9, 2012
I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
View 3 Replies
View Related
Jan 2, 2012
I have 3 images which I am looking for the best treatment.
a) Dark hair: the woman has an dark hair which is almost blended with the background. What to do to bring more definition to hair and to “separate” it from background?
b) Face light: one side of the man face (and body) is with much brightness, blending with his white shirt yet. Is there any way do correct it?
c) Spot of light: in a slice of a landscape there is a spot with much clarity/brightness. I would prefer to bring more blue from the sky then light. On the other hand, maybe there is any way to take benefit of the light.
View 3 Replies
View Related
Mar 11, 2011
A process to turn a color photo into a sepia tone? Just dropping a dark color on the photo doesn't seem to work very well because it just masks the detail.
I've attached the photo, I am working with.
View 9 Replies
View Related
Aug 7, 2013
I have a Smart Collection with one of the parameters being "Treatment - is - black and white". It works fine but not when I have "Lightroom B&W presets - B&W Look 5" applied.When I apply this preset the image does not "get pulled" into the Smart Collection. It works fine with the other B&W presets. And when an image is in the Smart Collection - by applying one of the other B&W presets - and then apply B&W Look 5 the image disappears from the Collection. Win 7 64-bit - Lr5 (not 5.2).
View 3 Replies
View Related
Mar 23, 2006
I'm regularly working with files of 3-4 gigabytes in size and am having problems with my Mac crashing when I go to save.
I am using a G5 with dual 1.8ghz processors and 2gb of ram.
I'm saving using large file format,
View 4 Replies
View Related
May 29, 2013
I have AutoCAD 2013 and often "paste special" excel files that automatically update when the excel file changes.The problem I'm running into is I work with a person who has uses an older version of CAD 2004, so I always save to the older format for him.
When I etransmit, I be sure to add the excel file, but when he opens the dwg, only the outline of the excel appears in his dwg, no content.
View 8 Replies
View Related
Sep 26, 2012
Every new file in Photoshop CS5 is suddenly too large. For example, an 8 1/2 x 11 document at 300dpi (created simply with the Photoshop preset), is now 80MB on the disk drive after saving. In the past, it would be only 1MB.
View 1 Replies
View Related
Jun 27, 2013
I currently work for a fashion company whom do lots of designs using photoshop and the rest of the adobe applications.
When they save PSD files they're about 1GB in size.
Storage on the server seems to be getting very low now and we need to do something about it. We have several options in place for extra storage but would like your advice on down sizing the PSD files?
For example:
1) Are there add-ins to downsize?
2) Are they saving the files wrong?
3) Are they using wrong effects. layers etc?
4) Is it normal to have 1GB PSD files?
5) What can they do to have smaller PSD files?
View 3 Replies
View Related
Nov 22, 2012
We have 5 designers sharing design files across a windows network. Everyone is running photoshop CS6 cloud subscriptions (which have auto updated to 13.0.1). The team have created and opened PSD files fine since July. Over the last 3 weeks we have had 5 files so far become unopenable - we get the message: “could not complete your request because the file is not compatible with this version”. Could it be that they are too large? The problem files are larger than the rest at around the 1GB mark. We are running HPZ210 PCs with Windows 7, solid state drives for the software, regular HDD for the data, and 16 GB Ram. One file at least was housed on a hard drive as well as the server and neither the local or network version of the file opens so it doesn’t seem to be a server issue. Five people on different subscriptions and computers have tried opening the files to no avail. Files were working ok one day, then not opening the next.
View 4 Replies
View Related
Oct 8, 2012
I'm using/testing Photoshop CS6 for our company. We are using CS5 for 2 years with no issues. But PS CS6 crashes on lareg files. Say above 100Mb, with some layers. When saving the file, PS just closes with no message. Windows than says PS stopped working. And in the Eventviewer there is a error event.
I'n running no extra pluginns, just CS6 standard, fully up to date. Windows 7 32bits, 4Gb of RAM, 1 harddisk, Mac mini with i7, fully up to date. CS5 never gave issues with the same files.
View 9 Replies
View Related
Nov 3, 2013
I am using windows 8.1 and cs6 both recently installed. I have a problem with my PC in that downloaded RAW files are much too large at something like 45mb when they should be about 15mb.camera is a Nikon d700.
View 1 Replies
View Related
Apr 24, 2009
I'm having problems opening some large files I've been working on in photoshop7. Win XP pro sp3, HP dx2250 AMD athlon 64 3800+ 98MHz, 1.87GB RAM, 79.4GB free space on C:When I try to open these files I get a dialog box titled 'New', instead of the opening progress bar starting to fill up. The 'New' dialog box has the correct file name, image size listed as only 452k, when the file is actually over 2GB, Preset sizes set at Default photoshop size, width 16.02cm, height 11.99cm, res 72dpi.Actual size of file is 2.2GB, 96cm wide x 66cm high at 300dpi. Clicking on the "New" ok button opens up a blank background layer and no others ie it is opening a new file and not the one I have been working on. This happens to two versions of the updated file with separate file names (v3 and v4). I've opened the original file (v2, which still opens ok)) and have been enlarging the canvas size and converting from rgb to cmyk. It appeared to save okay. This happened yesterday, too and I thought I must have not saved it correctly, so redid the work and saved again. Now I know something not right as I can't open the saved files. I've cleared the preferences file but no change.
View 4 Replies
View Related
Jan 26, 2013
Whenever I import photos now (LR4), they auto preset to black and white on 'Treatment' on the develop tab rather than 'Color'. I've uninstalled and reinstalled the program hoping to get rid of preferences but it continues to do so.
View 1 Replies
View Related
Jul 1, 2012
I have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. I have had to disable the new autosave features, otherwise it just takes far too long.
CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
I am finding the new layer filtering system invaluable so would rather not go back to CS5. I can do to speed up the saving process?
View 12 Replies
View Related
Jan 3, 2013
I am in the process of creating a large( 10 feet by 3 feet) sign for a hockey arena. I am having trouble saving it as an eps file, which is what the printer has requested, without distorting or completely changing the effects? I am using photoshop cs5 on Mac os 10.6.8.
View 1 Replies
View Related
Nov 24, 2012
We are currently working on an architecutre project for which we have to make printed curtains/screens. The maximum of one Curtain is about 180 meters (600ft). Over the 180 meters we have a pattern, which makes it not so easy to split files into pieces (color gradients, a.m.m.)
Our printing company suggested us to produce everything in a 1:10 scale (1 meter is 10 centimeters) and in 600dpi and they will scale it up with their rip unit and print it than in 1:1. Final print resolution is therefore 60dpi.
As a start we are doing a 25 meters x 2,5 meters file - which is already super hard on the computer. (all new macs with 16gb ram and adobe creative cloud)
Is there any way of working like with videos - online and offline files? So that we work on a smaller scale and then repeat all the steps on the larger images.
We want to get our workflow optimized as we have to produce 3000 meters of image.
View 6 Replies
View Related
Jun 10, 2013
I've had problems with Photoshop CS6 freezing on me and giving me RAM and Scratch Disk alerts/warnings ever since I upgraded to Windows 8. This usually only happens when I work with large files, however once I work with a large file, I can't seem to work with any file at all that day.
Today however I have received my first error in which Photoshop says that it has stopped working. The log info is as follows:
General info
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988950
Exception code: 0xe06d7363
[code]...
View 2 Replies
View Related
May 9, 2013
Windows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 1 Replies
View Related
Mar 25, 2013
Windows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 13 Replies
View Related
Feb 22, 2013
In general, I save my documents as uncompressed TIF files. On a recent project I have noticed that the files being created appear particularly large and are significantly bigger than the size indicated in the status bar.
An example:
Document is 16-bit RGB with Background layer, copy of background layer, a new layer that contains a small amount of retouching work and 3 curve adjustment layers.
Status bar shows Doc 223.3M/502.1M.
Saved file size as uncompressed TIF is 1.22 GB. This would seem rather large to me, considering how many layers are in use. Perhaps I have just overlooked the size of files generated before. I do note that deleting unused layer masks reduces the size of the saved file to about 989MB.
I saved the file as a PSD for comparison and the resulting file is 611.7 MB (with Maximize Compatibility turned on).
So, I am wondering if the above is considered normal and, if so, what the second figure in the status bar shows? Does the size displayed in the status bar refer to the document size when saved as a PSD file (rather than uncompressed TIF), is it merely an approximation of the saved file size, or do have an issue with my installation of Photoshop?
For information, I am using Photoshop CS 6 Extended (13.1.2) on OS X 10.8.2. Forgot to add that I am not using any smart objects.
View 6 Replies
View Related
May 18, 2009
I want to format a large batch of high res files to 4x6 to send to a lab for 4x6 prints. How do I do this?
View 6 Replies
View Related
Feb 18, 2009
I work a bit on my laptop (vista premium, 4gb ram) and especially with large files the ram soon get maxed out and the scratch disk is used a lot (haven't run out, have about 150-170gb free).
I was wondering if putting the scratch onto a (partitioned - 1st for scratch) portable esata hdd would help?
View 1 Replies
View Related
Apr 10, 2009
I have a slew of psd files that were saved with maximum file compatability turned which left them incredibly bloated. Is there a trick to saving them which gets rid of the overhead left by maximum file compatability short of rebuilding every file from scratch? I'm guessing 20% savings on size would not only save space but speed things up too.
View 5 Replies
View Related
Sep 3, 2006
trying to make a DVD which will be of several large (>13GB) video files.
Is there a limit to how big you can import?
My first video file is 17GB and I want to be able to edit it and chop bits out...when I import it, I only seem to have 3mins of audio and a broken video image....
View 2 Replies
View Related
