I have a panoramic picture made up of three photos and i need some tips on how to get rid of the faint lines visible from where the three photos join.
you can see this in the attached image. under the big rock and in the sky on the right.
My mother has a picture of herself with singer Ed Ames that was taken quite a long time ago. The problem is, the lighting was horrible at the airport they were at and the picture turned out pretty bad. I'm no expert in Photoshop, but I do know my way around it pretty well- the problem is I don't know if there is any hope to bring out features in Ed's face.
This picture might be a lost cause, but if any of you think you know how to make the picture better,
I have attached a section of a picture that I am currently working on. I have been trying to get rid of some green and red pixels that are all over the picture. You can better see them in the hair and neck area.
The original file has a decent size and is 300dpi.
I have been trying to use the clone tool, paint over the hair but it just doesn´t look right.
I have been tasked with creating a time lapse video of a building being built. I have been supplied with the time lapse pictures that go back over 18 months so there are a large number of files.
Â
The problem I have is the pictures were taken by a motorized web cam - basically it took a picture to the left, move about 40 degrees take a picture straight then another 40 degrees and took a picture right to fit the whol building in. 3 shots were taken a minute so for every minute there is the whole building.
Â
When initially looking at the 3 seperate shots it looks like it would be fine for them to line up BUT there is a problem. The left and middle pictures have a small amount of overlap and can be automatically stiched together BUT the picture on the right will but up but has no overlap, is there anyway I can automate 2 different functions on the 3 pictures or do a 2 step automation that would firstly stitch the left and middle pic then but up the right pic to the joined images already stitched.Â
I've ps 7.0 I've my mom's picture and I fixed the background by using the patch tool but I tried to use the patch tool on er body when it 's screwed up. I tried to use the clone tool to fix it but it's blurry. Which tool will I use to fix her body?
View 5 Replies View RelatedPhotoshop CS5
Â
I have some plans that have been been scanned. There is distortion either in the original or in the scanning.
Â
The plans have reference grids that are
1. Not perpendicular; and
2. Not evenly spaced
Â
Is there an easy way to correct?
I'm new to using Linux based software and do not know how to stitch multi photos together to form a panoramic picture?
View 4 Replies View RelatedWhen I start a new project and I start editing the photo (i.e. drawing on it with the paintbrush) I encounter a problem when I try to select certain colors and delete. So lets say I have three colors in my image. I do a little drawing and editing on my image and then I want each separate color to be a separate layer. So I select two of the colors and delete them. Any things that isn't that third color or where the two colors I deleted used to be now has these "editing lines" is what I want to call them. You can see faint lines where I had made slight changes to the image with lets say the paintbrush. HOW DO I GET RID OF THOSE LINES?
View 2 Replies View RelatedI do book cover design use action script. There is basic PSD template, which has high resolution 300dpi and large image dimens. 2200 x 1450). I should insert a picture which has much lower resolution 96dpi and smaller size 430 x 640 pix. I need that this picture covered full area, i.e. had the same size as a front cover (at least same height). If I just copy and paste this picture it have very small size due different resolution and dimensions. If I just lower the resolution and dimensions of a PSD template to correspond my picture, this gives error when action script run (in Step2), and also it is inconvenient to work with small template. How to join template and picture correctly?
View 9 Replies View RelatedI created many lines, and joined them together nicely..Now I have a closed complete 2D shape...I want to extrude the shape, but...
I think I need to join all the lines to become a single line first...I can't find this command... How can I unite all the lines together
3 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
I need to join multiple lines to a new polyline..The lines are filtered by a selectionset
Dim oPline as new Polyline()
For Each oSel As SelectedObject In acSSet
Dim oEnt As Entity = TryCast(acTrans.GetObject(oSel.ObjectId, OpenMode.ForRead, True), Entity)
oPline.JoinEntity(oEnt)
End If
Next
The error occurs on the oPline.JoinEntity(oEnt)
In sketch mode, there is a function to split lines, but I don't see one to join lines.
(I'm talking about colinear lines with the ends touching - I want to convert two lines into one).
It may seem trivial, but I'd like to use these lines in frame generator to select by a single line and not by endpoints of two different lines. Less clicks and more consistency in my model.
Need macro to merge and join all overlapped lines after flattening so I end up with a basic flat 2D outline.
View 1 Replies View RelatedSo the problem I am having is when I try join lines and/or make a polyline. I am trying to model an electron lens and have all the measurement and angles correct but Autocad does not want to allow me to join the lines so that I can make a 3D model for export. When it does allow me to join all the line or make a polyline, the lines are not straight. Granted I have to zoom in to see the deviation in the line but my connecting lines are not orthogonal like they should be. Here is a picture of what I am trying to make.
The main problem area is the gray part three electrode 1.2.pdf (Don't know if you can see my attachment)
three electrode 1.2.dwg
I've got a series of lines that all join perfectly with round corners except 1 of them. See attached. I can't figure out why.
View 2 Replies View RelatedI want to join multiple lines together like join command but with multi selection.
View 6 Replies View RelatedI Wonder if it's possible, with a setting or something like this, to make the join command work only on lines or polylines that had the same linetype?
View 3 Replies View RelatedFollowed all the steps found online, but when I select "Join Roof", the cursor will not select any of the edge lines (tried on multiple roofs). Software Error? Revit 2014 Architecture.
View 1 Replies View RelatedI am a bit of a newbie to illustrator cs6. I have been using the image trace function so that I can edit my hand drawn pictures. I 'Place' the scan of my drawing and then go to Object>Image Trace>Make and Expand. The problem I have is when I want to join two lines together to close the shape (as below).
Â
I have tried simply dragging the anchor points and reshaping the line so it appeared to be closed, I have tried closing it with the pen tool and I have tried to 'path>join' them but this box comes up.
I want to be able to fill my image traces with colour easily, can this be done?
How do I solve this problem I cannot join basic lines to make a closed polyline as they will not join together. So i tried to use the flatten command which does not work and out puts error below:-
Â
Command Prompt Input/ouput
Command: FLATTEN
Select objects to convert to 2d...8 found
Remove hidden lines? <No>:
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
Â
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
How i can remove this lines Because when im zooming in picture very closely they appear and i cant see pixels.
View 2 Replies View Relatedthere is a method to make clear lines:
View 9 Replies View Relatedwhy are there lines across printed picture
View 1 Replies View RelatedI converted a PDF-file (PDF/X-1a) into a Photoshop file using Photoshop CC and got fine lines over the picture.
Â
Using Photoshop CS5, those lines will not appear.
a while back i had this problem where pictures wher looking funny when blurred but never realy had an answer this is what i am talking about [URL}...
Â
Now i took this with my phone because when i take a screenshot people say the picture looks fine ,I have tried alot of things but i can't fix it here is a picture of it as a ascreenshot [URL]...want a fix for this as most of my pictures become crap when i try to make something nice in photoshop !
I need to smooth the black lines of a clipart picture (have taken out the colour with colour bucket and wish to use the black outline as a colouring picture for children). The lines left are OK but a bit fuzzy in places, although not broken. Is there a smoothing technique I can use on the lines?
View 1 Replies View RelatedPrinting a picture which shows the grid lines I've added in PS9.
View 6 Replies View Related
