I have just purchased Photoshop CS6 and use it in conjunction with Pagemaker 7. If I import a scan in to pagemaker without photoshopping it it retains its target size. I color correct through CS6 and import it the target size is lost and it goes to an enormous size - it never did before and I've used Pagemaker and Photoshop 7 for years without this problem.
View 3 RepliesI need to automatically rezize a photoshop document by using an action. Sounds pretty simple, yes. But the thing is that the flow needs to grab the individual/specific size from ANOTHER open document (different from time to time) to be used as the target size.... I need to make the grab the target size from a variable, so to speak.
I've tried to use the crop-tool to grab size and then use select all + crop on the other document, but no. Plus loads of workarounds.
It has to be a full auto function to be run from a droplet.
This is what it will be used for:
A faksimil scan from a newspaper page needs to get a broken side like it had been ripped out by hand. A shadow on the ripped edge as usual. Easy to do by hand. But the action flow will use a "template"document holding a pre-made layermask built with the right edgelook. The Action will rezize this to fit the original faksimil dokument and apply the ripped edge+ shadow on the faksimil document in one go. By loading the selection from the layermask over to the faksimil.
I'm currently in the process of organizing my music collection with album art. I found a great site with high quality images[URL] .... and would like to resize pictures to 600x600 within the range of 200-300KB. Is there a way to automatically do this without changing the quality percentage by trial and error?
View 5 Replies View RelatedDo masks automatically stretch to the size of the target image?
In PSP8 I opened my target, 1615 x 1066 px:
Then, following the instructions, I opened this circular mask, 450 x 450 px:
But after completing the procedure my result looks like this, with an elliptical 'see through' area instead of a circle:
If this is by design, how would I get the circular effect I want? There are simpler ways of doing it for an all black/white mask.
I scan sports cards for Ebay and Elements scans it as a BMP and I need the default to be JPEG every time.
View 4 Replies View RelatedPSPX4's change to target tool has never worked right for me. I have X2 which does work right. In PSPX4 no matter what the setting it applies way too much color. Even at 1% opacity it is like about 80% in PSPX2 with all settings the same.
Latest updates installed. PSPX4 still does not like Adobe LR4 JPEGs when resaving them, although I now get an error message instead of a save that loses the file for good as some 4-8k sized file that can't be opened. I still have to use X2 for those two reasons.
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedIs there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedMleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
Photoshop CS6 has loaded on my Dell Alien with tiny icons, I need a magnifying glass to make out which tool I'm selecting.
Changing the display resolution makes no difference.
Is there any way of increasing the size of icons and fonts in Photoshops workspace?
I am using Photoshop CS3 extended 10.0.1 on Mac Intel. I have made a layer of one photo that I want to blend into another. Last time I did this in the distant past, there were handles in the selected layer that I wanted to blend and I could grab and drag those handles to change the size of that layer in relation to the other.
It was very simple. I have been at it for quite awhile now but those handles are not there and I can find no way to make them appear. I cannot change the size of one layer in relation to the other.
I want to print an image using an online service and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
View 3 Replies View RelatedI have my preferences set up for my cursor to show as brush size, but suddenly my brush shows up as a tiny dot no matter what size I change it to (I've gone all the way up to 5000 pixels with no effect when using the brush, healing brush, and clone tools). My image is 1402x996 pixels at 200ppi. I've tried zooming in with no effect. I'm probably missing something obvious, but I can't think what.
View 2 Replies View Relatedim working on a big poster 300 cm x 300 cm , so when i change the dpi, pixel size changes too...??
View 1 Replies View RelatedI have PS CS4- never had this problem-today I can not change the size of an image- it indicates it is changed- but when I forwarded it to another site-it was not changed- I checked for updates and i turned the computer off and on- nothing worked
View 2 Replies View RelatedIn CS 3 suddenly i cant change the size of my brushes anymore. Well i can from very tiny -when you only see a cross- to about 45 pixels (with a default brush) when i use the slider it can show 2500 pixels but its still the 45 pixels from before. I dont understand, everything worked fine, i was working already abour 45 minutes without any problems, and suddely this happens....can anyone tell me what could be wrong or what to do about this?
View 8 Replies View RelatedI'm trying to adjust the size of a specific image after the initial placement. I have tried "image size" and adjusted either by pixel size or percentage- but each time I do this it just adjusts the size of my entire canvas- not the individual photo I'm trying to adjust.
View 3 Replies View RelatedYesterday I installed Elements 12. My previous version was Elements 7. When I scan photos with my scanner Canon PIXMA MX340, I used to have advanced scanning options with Elements 7, but now with Elements 12 there is only a simple option. How can I get this advanced option again? I contacted Canon, but they said I should contact you instead. In the advanced option, I could zoom, scan 200% or more, up to 1200px. The only option I've got now is to change the size up to 600 px.
View 2 Replies View RelatedWhile I was creating image mapping for some images, I noticed that under "Target:....", there are four different things (_blank; _self; _parent; _top) and which one will make the link to pop up in a new browser window? (like separating from my website so the visitor will still see my website, not being directed to another page, making my website "disappeared").
View 5 Replies View RelatedI am trying to move an image onto a blank canvas.
A pop up comes up that says that I'm trying to move something with a different depth onto the canvas.
I'm a beginner. and i'm 49 years old. Just got 15 lessons. But i want to create and i like it very much. Sorry if my English is not so good, but it is almost 30 yaers i've written in English.
My question is: I want to make an image jump out of his frame, but how can i put a target in its own layer. If i use layer via cut, there is a hole, and that is the problem, when i want to transform the frame where the target is jumping out.
I'm viewing Photosop on a 40in monitor. How do I change the size of all the labels and tools?
View 3 Replies View RelatedI am working on a banner for my Youtube channel, and I want the text to fill the safe text area needed for the banner. Thing is, I don't know how to change the pixel dimensions of a text box.
View 3 Replies View RelatedI'm using an infinite light on a text extrusion in CS6. Is it possible to change the size of the gimbal display or move it to another part of the canvas ?The icon is really large and it's getting in the way of the object view
View 3 Replies View RelatedDon't use it often but when you need it you need it. Problem is for some reason I can no longer change the shape or size. Just get a square block about a 1 x 1 pixel and I'm stuck with it. Go into brushes or where ever and everything is greyed out.
View 9 Replies View RelatedI have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
When our photographer browses his folders with pictures and double clicks upon one of them (jpg-files always), his Photoshop (he uses CS3 and Windows NT) always opens up the file only shoving it as 16,3% size (or such, I can't remember the exact number)
As a result the picture hardly fills 1/4 or 1/8 of the available space in the Photoshop screen, and he always has to click the picture larger before being able to work in it.
He has recently got a new - and more powerful - computer, and he did not have the same problem when using the old computer, here his files always opened to the maximum possible size.
I have bunch of images that are all the same size. I was wondering if I wanted to shrink the image by 50%, do I have to do them one by one or is there some function or method so that i can do a whole batch since it's all the same commands.
View 1 Replies View RelatedAll of a sudden my thumbnail seze changed for a good size to tiny. How do I change it back?
View 2 Replies View RelatedIs it possible to change the print font size. I have printed off the reader manual to assist me, but unfortunateley , as an 80 yr/old and with only one eye, I am finding the small font difficult to read and follow. It is not possible to change the printer font size, as I am informed by H P tech dept that it is controlled in the elements 12 programe
View 1 Replies View Related