Photoshop :: Render Video - Make It Look Best In Non Color Managed Players?
Sep 29, 2012
I have experienced when rendering video from Photoshop that the color looks especially bad in Quicktime Player compared to what it looked in PS. I read that there is a color shift issue when Rendering Video from Photoshop due to the lack of color management in some video players. I know this is more a player issue than a Photoshop issue, but I want to be able to make my video look best across all players.
Is there any kind of general rule for an adjustment I can make?
I can't seem to find much information on Google about this particular shift with regards to PS' Render Video.
View 4 Replies
ADVERTISEMENT
Apr 17, 2013
I'm assuming this problem I'm having stems from having color-calibrated monitors, but let me know if I'm wrong!
To preface, this is the setup I have:
Windows 73 monitors as follows, all have individual color profiles calibrated using the Spyder 3Cintiq 12WX Dell U2410Dell 2409WFPPhotoshop CS6 - Proofed with Monitor RGB, and tested with color-managed and non-color-managed documents . I usually do most of my work on the Cintiq 12WX, but pull the Photoshop window to my main monitor to do large previews and some corrections. I noticed that the color picker wouldn't pick colors consistently depending on the monitor the Photoshop window is on.
Here are some video examples:
This is how the color picker works on my Dell U2410:
[URL]........
This is how it works on my Cintiq 12WX:
[URL].........
Main Question
I know the Cintiq's video capture makes the picture look more saturated than the Dell's, but it actually looks fine physically, which is okay. But notice how the Cintiq's colour picker doesn't pick a matching colour. It was actually happening the opposite way for a while (Dell was off, Cintiq was fine), but it magically swapped while I was trying to figure out what was going on.
Semi-related Question regarding Color Management
Color management has always been the elephant-in-the-room for me when I first tried to calibrate my monitors with a Spyder colourimeter years ago. My monitors looked great, but Photoshop's colors became unpredictable and I decided to abandon the idea of calibrating my monitors for years until recently. I decided to give it another chance and follow some tutorials and articles in an attempt to keep my colors consistent across Photoshop and web browsers, at least. I've been proofing against monitor color and exporting for web without an attached profile to keep pictures looking good on web browsers. However, pictures exported as such will look horrible when uploaded to Facebook. Uploading pictures with an attached color profile makes it look good on Facebook. This has forced me to export 2 versions of a picture, one with an attached color profile and one without, each time I want to share it across different platform. Is there no way to fix this issue?
Pictures viewed in Windows Photo Viewer are also off-color, but I think that's because it's not color managed... but that's a lesser concern.
View 12 Replies
View Related
Sep 8, 2012
My monitor is correctly profiled and the colors in Photoshop CS5 are correct and they print correctly. When I view the same image in Bridge, however, the colors are slightly more saturated and seem incorrect. They appear as they do when I view them in non color managed applications. Is Bridge color managed as is CS5?
View 3 Replies
View Related
Jul 12, 2012
If it is possible to see in Photoshop what an image will look like when it is out in the un-colour managed world?I can see how you can do it if you are saving for web because you can preview it in a browser, but is it possible to do this with TIFs and PSDss ?
I have a wide color gamut display and even with it set to sRGB color mode emulation, sRGB tagged images that look correctly saturated in Photoshop look over saturated once out of it and in an uncolour managed environment - particularly the reds. If I can replicate this environment in PS I can edit the colors to make them more neutral looking.
View 15 Replies
View Related
Aug 2, 2012
I would like to do a decent calibration of my Epson V750 Pro scanner to achieve a color-managed workflow. I have the latest version X-Rite i1 Photo Pro 2 calibration kit, and although this enables me to calibrate my monitor and printer, it does not support scanner calibration.
I do have Silver fast Ai Studio which includes a scanner calibration facility - is that the best available to me or are there any other options, possibly using the i1 spectrophotometer as I know that it used to be possible to carry out calibration with the older versions of that equipment? Other than that, I'm using an Epson 3880 printer, running Vista x64 and using Photoshop CS5.
View 4 Replies
View Related
Jul 9, 2013
I get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies
View Related
Feb 9, 2013
I am a student in animation and media design. I have used photoshop in CS4 to animate in the past then I switched to creative cloud.
Another student thinks that I am getting it to render and its playback is just to fast for me to see but I have adjusted the settings and used different formats but it is all the same. What else could it be?
View 1 Replies
View Related
Jul 26, 2012
I can render out the same video (same quality) in both PS CS5 and PS CS6, and in CS6 the mov file size will be about 10X bigger. How can I get CS6 to render out a smaller file size mov?
examples (random ACS comertial/video from youtube)
[URL].........
[URL]........
View 3 Replies
View Related
Apr 29, 2008
I just reinstalled my photoshop after formatting my pc...
installed photoshop, went to render one of my animations to a video file like iv done before, but when i go into the render options.. the quicktime export options im not able to use....
View 2 Replies
View Related
Feb 15, 2013
I created a slide show with elements 11 and burned a dvd. The dvd worked fine on our DVD player but not on a few others that we tried. Is there a solution that would allow the DVD to run on all machines?
View 2 Replies
View Related
Jul 24, 2013
I've got a problem with a Photoshop CS6 version I use in my office (Windows 7). Everytime I try to export a video from the timeline to use an image sequence on a graphic software it keeps crashing. The video render initializing starts and stops more or less at 80%.
If I cancel it, I cannot use Photoshop again as it keeps restarting at anytime only for stopping itself always at the same point. So I have to force it to close with the task manager.
View 1 Replies
View Related
Nov 8, 2013
I am trying to render a video from layers I made from a quicktime. The problem is that all of the layers are on top of each other and take up the whole length of time instead of each being one frame sequentially after each other. So, when I render or do a DPX sequence it is only one frame played for 6 seconds. There are 167 layers (frames) so I would rather not have to adjust each layer back one frame at a time.
View 16 Replies
View Related
Sep 7, 2012
I can see that the render video options are vastly different in OS X and Windows versions of PS CS6. Not only they are different layed out but as far as I can see a wide range of codecs are missing on the OS X version.
In particular, how can I export a video file using QuickTime container and H.264 codec in OS X version? If You select H.264 video it creates an .mp4 file whereas I wnat a .mov file. Same codec but different container.
View 15 Replies
View Related
Sep 30, 2013
MacPro1,1 (32bit kernel, 64bit OS X 10.7.5)
x5355 8-core 2.67GHz CPU,
32GB RAM,
4-Drive RAID0 System and data drive (four new 3TB Seagate Barracuda [fast] drives)
GTX 570, 1.3GB - Recognized by PhotoShop for OpenCL and OpenGL
PhotoShop CC (v 14.1.2 x64) Trail (about 5 days into it)
1) I can open a video and play it back at the speed of the video.
2) I can not get playback faster than 1 fps if there are any filters applied - the pre-render / buffering isn't working at all.
3) I can not "Render Video" by choosing either "Render Video from the menus or the Export Arrow button in the GUI.
As soon as I select either I get a Progress Bar that that says "Initializing Video Export" but never finishes. I have waited as long as 4hrs and still no dice.I've tried with more than a few different videos and the result is always he same. Here are three of the videos I have tried with:
P00001_Cell-cell-cel..
P1020060-25p_ReEncod..
The_1st_12hrs.mov
View 9 Replies
View Related
Jun 7, 2012
I'm trying to use the export>render video feature in Photoshop CS5 extended. I must use avi without any compression, keeping the original frame rate (the original file is also an uncompressed avi). My impression was that this setting keeps the original video quality.
However, the exported video loses quite a bit of its original quality. Is it possible to keep the original quality?
View 6 Replies
View Related
Oct 17, 2012
I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?
View 5 Replies
View Related
May 26, 2011
I have a 3d animation project I created successfully in PS CS4. It has a transparent background. I need my final movie in a .SWF format. In photoshop,when I render the animation to video (.MOV) it renders with a black background, loosing the transparency. How can I render this to video with the alpha channel intact so that the background is transparent?
View 2 Replies
View Related
Jul 19, 2008
I'm in the render video dialog and quicktime option is disabled.
It wasn't a little while ago when I was playing.
I can not find in the help topics why.
Might somebody be able to help me un-disable it?
View 1 Replies
View Related
Mar 11, 2013
I am using Elements 10 for the first time and am a true beginner at this. I am trying to add multiple effect onto the beginning of a video. Do I have to render the whole video every time I want to watch what I added to the video? The video is 45 minutes long and I am only working with the first 5 minutes of the video. I am guessing if I cut and remove the 40 other minutes rendering with not take so long but, how do I save the other 40 minutes so I can re-attach it when I am ready to work on it?
View 2 Replies
View Related
Nov 13, 2013
I have been using Photoshop CC for several months to export animations to .mov. All of a sudden it gives me this message - "Could not complete the Render Video command because of a problem with Adobe Media Encoder." what is happening, the Media Encoder seems to be working fine.
View 3 Replies
View Related
Aug 17, 2013
I was using photoshop cs5 and am currently on a trail of CC, everything else is working fine, just File>export>render video takes along time for the dialog box to appear, which was not the case in cs5 (almost instatly opens).
Any settings I can change to speed this up? Im using Windows 7 32bit.
View 11 Replies
View Related
Nov 27, 2013
I have a team Photo to which I wish to add Photos of two missing players. Can I do this in Elements 10? If so How?
View 1 Replies
View Related
Jan 19, 2013
How do I get a video render into the Adobe media encoder queue instead of doing individually?
View 2 Replies
View Related
Aug 9, 2011
In Max 2012 how to I render a transparent video?
View 4 Replies
View Related
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
May 28, 2011
I am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
View 1 Replies
View Related
Mar 7, 2014
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies
View Related
Apr 15, 2011
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
View 5 Replies
View Related
Nov 24, 2013
I have been using X5 for almost a year and everything seems find until lately when I up graded my system to window 8.1. I have assemble a 40 min video but when I tried to use 'share' to output to MP4 iphone/ipad HD,the rendering go halfway then the VideoStudio crashed with an error 'The program has encountered an unspecified error' and a DMP file and ask me to contact Corel support. My project only has 1 video tack, 1 voice track and 1 music track and the project file is 17,426 KB. If I disable the voice track, then the project can render successfully. Since the voice track is recorded using VideoStudio voice over with WAV format, I went back and convert all voice into mp3 to smaller size but still crash when render halfway. My system should have enough resources to process this 40 min video.
Window 8.1 pro 64x
16GB ram
CPU i7
Hard drive 2T.
I have assemble 40 min video with heavy voice before in XP and it render without any problem. Is there are issues between VideoStudio and window 8.1 64x ? Is there a limit to VS project size, or voice track size ? I read some of the posts and you recommend to manfully uninstall the software and reinstall the software. I am reluctant to do this, not at least after I can output my project to mp4, because it might wipe out my setting, templates, libraries, and even my project file. Do you know of any tool so I can read the DMP file ? I don't understand what good to have a DMP file when my software have passed the 30 day or 1 time support warranty?
It has been very frustrate to spend all this time to assemble a video and at the end cannot produce a sharable version. I was about to upgrade to X6 but now I have to think twice if this issue is not resolved. What good are all thees fancy new features in X6 to me if I cannot produce a sharable version of my project ?
View 6 Replies
View Related
Jun 3, 2013
I'm using VS x5.
Basically, I have a Sanyo HD camera which I've used to capture quite a bit of holiday footage. I've edited some together but when I output the project to either mp4 or mts the picture is choppy when panning.
The camera was set to 1080p @ 30fps (there's no option of 25fps even though the camera was bought here in the UK) which I have matched by choosing the "Custom" option when creating the movie. I've matched the bitrate (16789bps on the source) but this ends up being 15540bps on the output file. (??) According to the properties on the source file it's 29.97fps which I have also matched in the Custom settings option.
I understand I should expect dropped frames if I was trying to output the file as PAL compliant, but I've got VS set to NTSC so I don't think this is an issue.
The source file is mp4 and looks fine when viewing the panning scenes.
PC Spec:
Intel quad core 2.4Ghz
4Gb RAM
ATI Radeon 5430 Graphics card
2TB SATA HDD
Windows Ultimate x64
View 14 Replies
View Related
Aug 28, 2013
source video
1080i(tv capped) format:ts 25 fps no audio
output optinos:
MPEG Transport-Stream Files
24 bits, 1920 x 1080, 25 fps
Frame-based
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 9900 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
i tried many times , sometimes the render was comple without warning or error , sometimes the render process was failed by the message "File format mismatch" . but there`s no output video in my computer in either way
View 3 Replies
View Related
