I was using photoshop cs5 and am currently on a trail of CC, everything else is working fine, just File>export>render video takes along time for the dialog box to appear, which was not the case in cs5 (almost instatly opens).
Any settings I can change to speed this up? Im using Windows 7 32bit.
My computer is a MacPro
OSX v. 10.7.5
Processor 3.33 GHz 6-Core Intel Xeon
48GB 1333 MHz DDR3 Ram
Both the Start up disk and the Data Disk are SSD Hard Drives
I'm running the latest PS CD6 v.13.0 x64 it's NOT the fastest computer ON THE PLANET..
I'm using PS during the day (I'm a professional photographer and I use PS about 6-8 hours a day).....Liquify gradually get's slower and slower to open. By the end of the day it's taking 6-10 minutes for Liquify to open. I have to literally "RE-BOOT" my computer to get it to start working properly. And...for goodness sake....do not LEAVE Photoshop open over night...by the next day....I can't even open a JPG it's so slow...
NOW...compare that to my LAPTOP....MacBooK Pro.....no where near the processing power and no where near the Ram copacity....and PS CS6 opens perfectly....Liquify POPS OPEN so fast I can't even blink my eyes before it's open.
Why is the faster more robust computer opening LIQUIFY slower than the lesser computer?
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
I have simple composition that animates a two shapes that I am using as a "screen" to show photos. The shapes are 3D; the camera movement is minimal. I have an Ambient light and two Spot lights.
I am on a one year old i7 processor with 16 GB of RAM. Cache files are written to an SSD.
Still it is taking a long time to render (it's a three minute project and takes about 20+ hours to render), and there's no pics added - just the "screen".
The final project is similar to the many templates you can find that show photos/videos. It's basically a fancy slideshow, but unlike those you can buy, it will hold 25 to 30 pics.
Any thoughts on what I can do to either use something other than a 3D shape (but still keep it 3D) or change parameters or workflow to cut down the render time. . . I am pre-rendering the composition now (which will take the 20+ hours) but obviously, if I want to change anything with the movement or the overall length, it means another day of rendering.
I've just started to use AE again (CC version) and I'm trying to make a simple 3D text animation and it seems like it's taking an excessively long time to render. I have a 4 year old MacBook Pro (2.53 GHz Intel Core 2 Duo, 4 GB, NVIDIA GeForce 9400M 256 MB) and it's taking several hours to render and export a 5-second clip through Media Encoder. The animation is just text on a black background. I'm using the ME YouTube 480P preset. The original file is 1920x1080 because I am going to have to chroma key it over some existing 1080p video. I did a little 3D work years ago and this seems like an awfully long time for such a short, simple animation. Is there some simple, common mistake I'm probably making? Should I scale the comp down to 480p?
View 2 Replies View RelatedI am trying to render a 4 second clip of 3d text doing a 360° turn, I export in H.264 and have okay computer specs.
3.04 GHz Quad core
12 gigs of ram
want to start exporting more video for a project, but I can't do it with this render time.
When I run a video in Windows Media Player then freeze it and take a print screen and paste the print screen into Photoshop, I can't save out the picture because the picture 'moves' around it's canvas in the picture. And when I unfreeze the video so it carries on playing in Windows Media Player, it plays in the pasted Photoshop window too!
How do I simply save out a picture from a video still?
I'm importing a 878,367KB .mov file into Premiere Pro - and while the full audio is there, the video screen is just green.When I put it into a sequence, the preview pane is black - and when I try to render it, it says "Error compiling movie. Unknown error."
View 4 Replies View RelatedInstalled Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View Relatedwhen I try to use it now, It basically locks up the whole computer, and takes around 2-3 minutes before it finally pops up with the liquify box.
View 7 Replies View RelatedI´m wondering if there is a way to get rid of the Netrender dialogwindow?
Everytime I have to click Connect, check in the jobslist what jobname I had last time and then press the plus sign ´til I get the next number in line...
Can´t this get more automated? Like I set my render settings on my workstation, set the output path and file, press render and the job gets send to one of the slaves without my going through the procedure described above??!!
I am Using Coral Draw X3 & when i drag & drop or copy & paste image ( small aswell as big) takes time and in between it gets stuck & not responding message.
View 9 Replies View RelatedI'm trying to bake a material using render to texture dialog. The issue is that whenever i render a diffuse map, it only renders the faces visible in the viewport im working in. The rest of the uv faces are rendered black. All the tutorials i look at never have this problem. What's the issue?
View 1 Replies View RelatedI am a student in animation and media design. I have used photoshop in CS4 to animate in the past then I switched to creative cloud.
Another student thinks that I am getting it to render and its playback is just to fast for me to see but I have adjusted the settings and used different formats but it is all the same. What else could it be?
I can render out the same video (same quality) in both PS CS5 and PS CS6, and in CS6 the mov file size will be about 10X bigger. How can I get CS6 to render out a smaller file size mov?
examples (random ACS comertial/video from youtube)
[URL].........
[URL]........
I just reinstalled my photoshop after formatting my pc...
installed photoshop, went to render one of my animations to a video file like iv done before, but when i go into the render options.. the quicktime export options im not able to use....
When I open the file.psd to edit or file.jpg (Any file type) The program will appear the dialog and then When I click "OK" to close this dialog.After that, it will appear the dialog to close program.
I could not continue to work.I must close and reopen the program. (Do not open the file.)
Have just developed a major problem. cdr files are taking a ridiculously long time to open,
Running X6.3 64 bit on a Core i7 920@2.67 GHz 12Gb RAM 6TB available disk space, Windows 7 64 bit Ultimate SP1
Existing cdr files are taking up to an hour to load. I've deinstalled and reinstalled, to no avail.
A few of my design drawings are taking a long time to open from cold. They are not particularly complex drawings and all the files / assembly etc. that are referenced on them are correctly stored and are not corrupt or 'sick'. Why are these drawings taking so long to open? waiting for them is slowing me down considerably.
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
A costomer sent us an IGES file 228 MB in size and it's trying to open but its been almost an hour.
I tried different options in the options tab before opening but still dooging it.
Dell Precision T3500
Windows 7 Pro
Quad Core Intel Xeon
6 Gb SDRam
NVIDIA Quadro
Product Design Suite 2014 Premium
I've got a problem with a Photoshop CS6 version I use in my office (Windows 7). Everytime I try to export a video from the timeline to use an image sequence on a graphic software it keeps crashing. The video render initializing starts and stops more or less at 80%.
If I cancel it, I cannot use Photoshop again as it keeps restarting at anytime only for stopping itself always at the same point. So I have to force it to close with the task manager.
I am trying to render a video from layers I made from a quicktime. The problem is that all of the layers are on top of each other and take up the whole length of time instead of each being one frame sequentially after each other. So, when I render or do a DPX sequence it is only one frame played for 6 seconds. There are 167 layers (frames) so I would rather not have to adjust each layer back one frame at a time.
View 16 Replies View RelatedWhen i am taking uv snapshot, an error is seeing.
Error: Failed to open output file: E:WORKSMayaMaya WorksSwordimagesoutUV.jpg
I can see that the render video options are vastly different in OS X and Windows versions of PS CS6. Not only they are different layed out but as far as I can see a wide range of codecs are missing on the OS X version.
In particular, how can I export a video file using QuickTime container and H.264 codec in OS X version? If You select H.264 video it creates an .mp4 file whereas I wnat a .mov file. Same codec but different container.
MacPro1,1 (32bit kernel, 64bit OS X 10.7.5)
x5355 8-core 2.67GHz CPU,
32GB RAM,
4-Drive RAID0 System and data drive (four new 3TB Seagate Barracuda [fast] drives)
GTX 570, 1.3GB - Recognized by PhotoShop for OpenCL and OpenGL
PhotoShop CC (v 14.1.2 x64) Trail (about 5 days into it)
1) I can open a video and play it back at the speed of the video.
2) I can not get playback faster than 1 fps if there are any filters applied - the pre-render / buffering isn't working at all.
3) I can not "Render Video" by choosing either "Render Video from the menus or the Export Arrow button in the GUI.
As soon as I select either I get a Progress Bar that that says "Initializing Video Export" but never finishes. I have waited as long as 4hrs and still no dice.I've tried with more than a few different videos and the result is always he same. Here are three of the videos I have tried with:
P00001_Cell-cell-cel..
P1020060-25p_ReEncod..
The_1st_12hrs.mov
I'm trying to use the export>render video feature in Photoshop CS5 extended. I must use avi without any compression, keeping the original frame rate (the original file is also an uncompressed avi). My impression was that this setting keeps the original video quality.
However, the exported video loses quite a bit of its original quality. Is it possible to keep the original quality?
I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?
I have a 3d animation project I created successfully in PS CS4. It has a transparent background. I need my final movie in a .SWF format. In photoshop,when I render the animation to video (.MOV) it renders with a black background, loosing the transparency. How can I render this to video with the alpha channel intact so that the background is transparent?
View 2 Replies View RelatedI'm in the render video dialog and quicktime option is disabled.
It wasn't a little while ago when I was playing.
I can not find in the help topics why.
Might somebody be able to help me un-disable it?
I am using Elements 10 for the first time and am a true beginner at this. I am trying to add multiple effect onto the beginning of a video. Do I have to render the whole video every time I want to watch what I added to the video? The video is 45 minutes long and I am only working with the first 5 minutes of the video. I am guessing if I cut and remove the 40 other minutes rendering with not take so long but, how do I save the other 40 minutes so I can re-attach it when I am ready to work on it?
View 2 Replies View RelatedI have been using Photoshop CC for several months to export animations to .mov. All of a sudden it gives me this message - "Could not complete the Render Video command because of a problem with Adobe Media Encoder." what is happening, the Media Encoder seems to be working fine.
View 3 Replies View Related