I believe it is opening the jpeg preview stored with the DNG. Is this true or does Preview support DNG an RAW natively somehow? The particular image I opened, just to try it, looked brighter and more saturated than opening the same image in a converter.
View 2 RepliesLayers appear on the “preview” but not on there as the file opens,
In the attached screenshot, a layer is displayed but as the file opens it is not there!
I tried all the very common steps like turning on/thaw/…
And also recovery
And saving it in another file
And other…
But didn’t work
How layers are displayed in the preview while physically they are not there in the drawing as the file opens?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
A drawing of 8.5MB appears on the preview and opens with nothing inside,This is the second time I’m reporting this issue regarding dwg files that appears on the preview but open improperly.
part of the dwg file is shown through the preview window but when open, nothing is found inside.
[URL]
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
When I open up a psd files they open at 0.13%. Really small. Today they all opened at this size. I'm using CS4 on a Mac Pro running OS 10.7.5. How do I get files to open at 100%.
View 3 Replies View RelatedI installed the CS4 Suite. When Photoshop comes up the background layer is transparent. This happens even if I open a file with Photoshop. In that case, the Layer icon shows the image but what I see on screen is only the checkerboard pattern. The proper way for the New file to show up is with the background a solid (specified) color and for an opened file the actual image being opened.
View 9 Replies View RelatedSince I updated to CC I've had a bug that drives me a little nuts. Because I have a Retina MacBook Pro connected to an Apple Thunderbolt display, Photoshop seems to get confused about the size of the window to open. It thinks it should be sized to fit on the Retina screen (which I use as secondary), but at 100% on the non-retina screen (the primary display).
The end result is that every time I open a document the window is only showing the top quarter of the document I'm opening. I always have to hit command plus, command minus to get it displaying right.
im using vista x64 and PS CS4 (updated). the problem occurs on both 32bit and 64bit versions.when i open an image with PS (does not matter which type or which way to open it), PS seems to open the file correctly, but does not display it at all.everything looks like the image is opened (f.e. small thumb of it in the layers window and the name of it in the title bar), but where the image should be displayed in fullsize you only see the grey PS background.it seems that besides this PS works completely fine. f.e. when i use the paint bucket tool on the grey area in the middle, the layer thumb changes to the color used..another strange thing: when i switch to another program and switch back to PS the grey background is gone and instead you see whatever program is beneath PS at that moment.. you can move the PS window and see right trough it, only the PS control windows are still displayed. thats what you see in the attached image: there is no screenshot of my explorer loaded in PS,
View 5 Replies View RelatedMy understanding of Auto Recover is that when a working file is saved and closed, the corresponding Auto Recover psb should be trashed automatically.
Every evening I save and close all my work, quit Photoshop and shut down the Mac. Every morning when I start Photoshop, at least one Auto Recovery file opens. It's the last file(s) I was working on the previous evening.
I've toggled Auto Recover on/off, trashed the folder and had CS6 recreate it. Nothing works. Every morning, I am presented with a psb of the previous evening's work.
My scratch disk is a dedicated 100gb SSD. I have triple verified that CS6 is not writing recovery files to a different location.
My normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override format to "TIFF", the file opens with clipping path shown.
I have Photoshop Elements 11 running in Windows 7 Ultimate 64 bit.
When I double click a jpg file to open it in the editor the editor opens but the image does not open. However if I open the editor and open any jpg file then double click on another file it will open.
This is for .MXF files shot on a Canon XF300. Things were working fine, but suddenly I am unable to open those mxf files in AE CS6. Even projects previously created with AE CS6 now won't open, and give me the 'file damaged or unsupported' error message in AE. The file locations are identical. I've found workarounds, but they fall a very long way short of the convenience of using Dynamic Link from the Premiere Pro CS6 timeline. There are lots of hits if you Google, but most go back a version or two, or suggest converting the MXF clips to an AE friendly format.
View 12 Replies View RelatedWhen I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
I'm running Adobe Illustrator CS4 on my Mac Pro running OSX 10.7 Lion and for some reason I am no longer able to open any new or existing files. Illustrator boots up just fine but 'File>New' gives me nothing. 'File>Open' gives me my usual search box but once a file is selected, again, I get nothing. Dragging a file into Illustrator gives me this response',
Before promptly quitting.
I have tried deleting all the files from my Illustrator Preferences folder but doesn't seemed to have worked.
In Lightroom 4.2 when open and I want to edit in PSE 10, I go to Photo, edit in PSE 10, and PSE 10 opens, but there is no image. I want to edit in PSE 10 and can't. Using LR 4.2, and attempting to edit in PSE 10, PSE 10 opens but no image opens to edit
View 1 Replies View RelatedIs there a way to have a Lisp Routine open multiple script files?
I have 10 types of scripts, that are specific to the type of file they open (as shown below). which simply open a file, purge/audit, save and close.
open "Q:PROJECTS321700Field ManagementCoordinationElectricalSleeving613321700_ES-613-Lev01.dwg"audit y-purge all * n-purge R * naudit yqsavecloseopen "Q:PROJECTS321700Field ManagementCoordinationElectricalSleeving613321700_ES-613-Lev02.dwg"audit y-purge all * n-purge R * naudit yqsaveclose The file above was named ES-613.
I would like to create a Lisp Routine that opens this script, *Some how closes the file*, and then opens another script.
For example:(defun c:Audit-Purge ()(command ".SCRIPT" "O:/Users/Kurt N/Script/Novartis/NovartisPURGE/ES-615.scr")(PROMPT "ES-615 Done.")(princ)(command ".SCRIPT" "O:/Users/Kurt N/Script/Novartis/NovartisPURGE/ES-613.scr")(PROMPT "ES-613 Done.")(princ)ECT>>....)
I have well over 10,000 brushes, couple gigs, is there a good file viewer for abr/brush files?looking for anything to view, organize, combine, etc. abr files, I am getting sick of doing it through photoshop,
View 21 Replies View RelatedI want to preview photoshop cs4 files in windows vista.
View 4 Replies View RelatedI shot two D3s last night and downloaded both cards. One the NEF files preview like normal and the other has NEF files that won't preview but open in Photoshop just fine.
View 2 Replies View RelatedI have reactivated Photoshop CS3 on my new computer. The only thing that is diffirent and irritating is that I have no preview of my PDF files - just the Photoshop icon. When I go to File - Open - I have no preview of the thumbnails. I didn't have this problem on my old computer. Same photoshop. I have now have Windows Vista.
View 5 Replies View RelatedWhen I am exploring my "pictures" folder, is there a way to make my .psd files show me a preview of the picture?
View 6 Replies View RelatedAny alternative browser maybe to view/preview giant sized .psb files? I am now working on files from 5 - 20 GB each, 30 - 50,000 pixels, and am stuck using Bridge to go thru them, which takes forever to create thumbnails, and is often unreliable, as every now and then Bridge will just refuse to create a thumbnail for a certain image or 2 and drives me crazy.
Am currently using CS3.
Yes I know this is an older version, I just wish there was a more efficient way to preview large files. PS obviously generates a flattened image preview every time u save, but the previews Bridge uses are fairly low res to my eye, yet it still takes ridiculously long to load each one, which I dont understand if during the save that preview image should be 'in' the file anyway.
Bridge CS3 not updating all the previews.
Thumbnails are fine and reflect the changes I've made in the RAW files, but some previews just show my default settings.
Latest version of Bridge and Camera Raw.
MacPro Quad-Core Two 2.8 GHz Processors
Memory: 4 GB
Mac OS 10.5.3
I've got a folder containing 170 pics. They are all DCS 1.0 files which means that folder actually contains 850 items (4 channels-files per pic + preview file).
I need to open each one of 170 pics and save them as EPS (either binary or JPEG - doesn't matter). If I try to automate it, it actually tries to open every channel instead of opening only the preview file.
When looking at Canon RAW files (.CR2) I can see the previews fine in Preview. Not the same for RX100 arw files. I can see the thumbnails ,
However preview window shows an icon with "exec" in it. Also, adjustments made in Camera Raw do not show in the thumbnails as with other my Canon 5D II raw files.
When working with tif files, I usually put all layers in a folder, and turned off the "eye" on the layer panel. So the size of the tif file would reduce to half.
But there's no way to preview the tif file with its eyes turned off in Mac. Is there a mac plug-in that let you do that?
Being an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies View RelatedIs there a way to batch print all of them, multiple files per page in thumbnail or so size?
View 1 Replies View RelatedWhilst trying to save an edited file in editor I get the following message.
Could not build a preview because of a program error. Im using imac
Is there a way for X6 to show a little preview image when looking through a folder of EPS files to import? Even to have this ability within Windows itself would be nice.
View 14 Replies View RelatedAfter I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies View RelatedHow i can preview ai, psd and indd files in windows? (NOT BRIDGE)
View 2 Replies View Related