When looking at Canon RAW files (.CR2) I can see the previews fine in Preview. Not the same for RX100 arw files. I can see the thumbnails ,
However preview window shows an icon with "exec" in it. Also, adjustments made in Camera Raw do not show in the thumbnails as with other my Canon 5D II raw files.
I shot two D3s last night and downloaded both cards. One the NEF files preview like normal and the other has NEF files that won't preview but open in Photoshop just fine.
View 2 Replies View RelatedBridge CS3 not updating all the previews.
Thumbnails are fine and reflect the changes I've made in the RAW files, but some previews just show my default settings.
Latest version of Bridge and Camera Raw.
MacPro Quad-Core Two 2.8 GHz Processors
Memory: 4 GB
Mac OS 10.5.3
We just bought a Sony RX100 and want to use it with our Photoshop CS5 12.0.4 and Camera Raw 6.7.0.339. The Raw files (extension .ARW) produced by the camera can't be opened by Camera Raw.
1. Can any released version of Camera Raw open these files?
2. Do we have to update to Photoshop CS6 to be able to open these files? (If so it's a tribute to corporate greed.)
3. Does Sony software can convert these files?
Using: CS6, Win7
After an external backup drive had its partition deleted we used recovery software to get as many files back as possible. It sorted the files by types but gave them all numbers for names. Using bridge to preview the illustrator files, most show a thumbnail, some just a small illustrator icon. When I try to open the files, some open no problems.
Some of the files are collections of vector art (multiple clipart in one file). In the preview that Bridge shows, the file is complete and all art is there. When I try to open some of these files, I get error messages like:
"Can't open the illustration. The illustration contains an illegal operand.
##.####.##
%##.####.####.###.....etc."
And when I click "OK" the file is either missing some of the artwork or it is completely blank. How does the preview show the complete file and when opened it's either missing elements or blank?
does pse 11 open raw files from sony rx100?
View 3 Replies View RelatedI have adobe elements 10 with all updates but it will not import .arw (raw) files from my sony rx100
View 3 Replies View RelatedI've just purchased a Sony RX100 camera. It captures RAW files in a format that ends in .ARW. Neither Lightroon nor Photoshop recognize that format. Is there any way short of converting .ARW to JPG that I can overcome this?
View 16 Replies View RelatedI've inserted some keywords into many CR2 images via Bridge. I then moved the CR2 amd XMP files separately in to the same folder. They keywords are no longer visible, but when I open the XMP file in notepad, I can see them. How can I get them visible in bridge again?
View 1 Replies View Relatedi only get miniatures in the preview window when using NEF files. works perfect white JPG.
View 1 Replies View RelatedI am an experienced cs5 user and just installed cs6. When I select an image in Bridge, I just get an icon in the preview box and the file number. I have never seen this in cs5.
View 1 Replies View RelatedI have a question does bridge cs3 need cache (drive space) to preview a photo or to see my photo with the slideshow feature ? i mean does bridge need to render and store the photos in the database to let me see in the slideshow or browsing i don't talk about thumbs or does it on the fly?
View 7 Replies View RelatedMy Question,rather my problem is that when I do a ram preview of my Ae Projects...something really strange happens. When Ram Preview is started,in the Composition Panel a new window thing appears in which the RAM preview is ongoing, nd of
which is out of view of the composition panel.When I zoom out the composition panel behaves strange and the RAM preview and everything else disappears from view,although the RAM preview is still playing in the background.
My specs
Adobe After Effects CC
2013 Macbook Air
8 GB RAM
Core i7
256GB SSD
The crashes always occur while editing a photo in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.
Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
MacBook Pro 15" Early 2011
2.2 GHz Intel Core i7
8GB 1333 Mhz DDR3 RAM
AMD Radeon HD 6750M 1024 MB
OS 10.8.2 (12c60)
I have just moved up to CS6 after many years of using Elements - so am coping fairly well with my new "toy" !
One thing has me a bit baffled:
I store my photographs in two formats: the original in .nef and the processed final version in .psd.
If I select "full screen preview" of a .psd file, in Bridge, it comes up full screen, but not at what I would consider to be best quality.
If I export a copy at 800 or 1280 quality in .jpg and view it in Windows Photo Viewer (or open the file in Photoshop itself) there is a distinct difference in picture quality compared to Bridge. The Bridge copy seems to have slightly muted colours and the sharpness is markedly less. I have two monitors so can compare them side-by-side, and have transposed them on the monitors with no difference.
In Elements, I can have the organiser on one monitor, if I highlight a thumbnail and hit F11 I get a full screen and full quality view on the other monitor.
Is this a "design feature" of Bridge/CS6 ? or have I missed something when setting CS6 up in the first place ?
1. Updating previews (100%) is very slow.
Bridge CS6 has problems updating the previews of images that get edited.While creating preview from scratch is rather swift, updating previews takes about six minutes on a MacBook Pro retina with 16Gb RAM.After one minute the preview gets updated, but then the busy signal in the low left corner just keeps turning and turning for five more minutes.Why is this happening? Is Bridge still busy with those previews? Why? The preview has already been updated, why those extra five minutes of business?
2. Image deleting is painfully slow.
You type Command + Delete, and nothing is happening for five, six seconds.Only then the images get deleted. Has noticed these two hold-ups?
I just went back after writing and editing this post, and Bridge is still busy with the preview update. This is now 15 minutes after the image had been edited. The busy signal in the lower left corner just never turns off again.
It feels like Bridge has also problems working in the background. As soon as you open e.g. a browser to bridge the waiting for bridge, Bridge seems to keep the busy signal rotating, but not actually doing anything until you close the browser again. Which is why I just had a 15 minute wait for an image preview to finally update. The time spent in the browser did not "count".
I have several viewports on my drg sheet, but when I print preview only one is visible, why is this?
View 4 Replies View RelatedI'm creating a new project drawing and have x-ref'd my base drawing onto the sheet to be plotted. I can see the base drawing thru the viewport while in layout, but once I try and preview my plot the drawing inside the viewport is not visible. that is, I can see the preview of my sheet border & title block, but nothing within the viewport shows on the preview screen.
View 3 Replies View Relatedwhen i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedCan elements11 work with raw images from a Sony DSC-RX100 camera?
View 1 Replies View RelatedWould it be possible to update the PSE10 Raw to level ACR 7.2 to use the RAW from Sony RX100
View 2 Replies View RelatedFiles saved from photoshop to a server in Mountain lion not visible. But when I save to desktop then move the file to the server, it recognizes that the file is there and I do an overwrite. Also happens with Illustrator files. Is this a MountainLion problem or CS6?
View 1 Replies View RelatedI'm trying to import a couple of models from the google warehouse into Photoshop CS5 extended.
They open without an error, but aren't visible.
I tried following this KB article: [URL] ..........
The script throws a syntax error:
Line: 68
-> var Construct0r = function() { };
I've also stepped through the parts of the model in the 3d palette looking for elements that have the opacity set incorrectly, but they all seem to be set to 100%.
I see the kb article is from january 2011; Is there a newer version of that script
see question above lightroom 4.3 and raw for sonuy disc-rx100
View 1 Replies View RelatedWindows cannot find C:/Program Files (x86)/Adobe/Adobe Photoshop CS3/Photoshop.exe
I installed Photoshop CS6 Upgrade (64bit and 32Bit) to my PC which ran CS5 Extended. When I deleted CS5, Bridge stopped opening files, whether I double clicked on the file or did Open with: I get the same error message.
just upgraded from CS5 to CS6 (originally had CS3) now when trying to load images which were loaded in 2002 when using CS3 I get an error message 'windows cannot find C:Program files(x86)Adobe PhotoshopCS3Photoshop.exe Make sure you typed the name correctly then try again' I assume that there is an association with a file that no longer exists how can I change this?
View 7 Replies View RelatedWhen I click on a file in Bridge to view within Bridge the file Opens in Photoshop. This has only just started to happen and is a real annoyance....how do I revert to only opening in Photoshop with a double click
View 3 Replies View RelatedI have recently upgraded to a Nikon d90 and i can no longer open any NEF files in photoshop or adobe bridge.
View 3 Replies View RelatedI cannot open .psd files in Bridge, only .jpg and .tif, as far as I know. The .psd files are flattened--no layers.
View 6 Replies View RelatedWe have several options in Bridge for opening files ... we can always open in the RAW editor ...BUT if we simply want to OPEN directly to CS4 > when we right click to OPEN the image >it goes directly to our EMAIL ? Can not find a spot in PREFERENCES to change this function ?
View 5 Replies View RelatedBridge and photoshop cs3 can´t open rawfiles after reinstalling.
View 4 Replies View Related