Here is my latest attempt at an out of bounds image.. I don't understand why the lines of the photo are jagged... I did this rather quick but I am a little confused about the jagged lines... which by frustration left me leaving the image as is. Any ideas as to why this happened? I had made a rectangle and did a fill and deleted the inner part.. then when I transformed it I made sure to hold the shift key to keep it correct..
View 9 Replies
How do you get an image to look like it is coming out of the TV screen? I have seen this effect in several ads and it drives me crazy to know how it was done. I saw a guy walking out of the TV screen, and I saw a car driving out of the TV screen.
View 1 Replies View RelatedIn the Shake Reduction Filter, what do you look for in the image, and how do you use the Blur Trace Bounds slider to optimize its function?
View 2 Replies View RelatedCan I have photos I make with out of bounds and layers printed?
View 1 Replies View RelatedWhen i hatch an area, i's fine, but when i match prop to another (witch is out of bounds) it goes out of bounds.
All of my hatches went out of bounds at some point.
Okay, So when you use a clipping mask there can sometimes be a lot of art that is invisible. If you "Select All" you'll get a rectangle only around what's visible. I want the bounds of that rectangle.
I tried itterating the art but I don't think that the art type is the best way to figure this one out. And if you use AIGroupSuite to test if an art group is "clipped" with GetGroupClipped, you get the bounds of the larger art that I'm trying to avoid.
I didn't see anything about bounds of a "selection" in the docs.
I've not had to deal with metes and bounds info in a very long time. For one project I have to generate the info for a couple parcels. From looking around it looks like there's a tool in ACAD Civil. Is there something similiar in Map3D?
View 2 Replies View RelatedSo I'm cropping to a square, but I want the crop to extend off the image area because I want to replace the missing bit in photoshop. This effectively makes the image bigger than the original. the only way to achieve the same effect is to scale the image, that keeps the pixel dimensions the same but effectively reduces the size of the image.
is there a way to crop beyond the image bounds?
I want to crop several images in same aspect ratio.So I checked "Fixed" option and set proper values in tool box.
And sometimes I want to complement image with background color if selectionis larger than original size. In this case, I add a larger layer bottom of the image and crop it.
But it would better if I can do it by one action.Therefore I'm trying to write a script-fu for it, but I'm stuck now.
Because a function `gimp-selection-bounds` returns points only inside ofthe image even if the selection is outside of image.
Is there a way to get bounds of selection outside of a image by usingscript-fu?
how to get/determine the visible bounds (top+left coords and width+height or Rect structure) of a group having a clipping mask or several masks? When a script asks for Visible Bounds, Illustrator provides the coords/size of the group like it does not have any clipping mask. So, you see a circle of 10px diameter (and these are the actual visible bounds of this group), but Illustrator says that the visible bounds are 50 px wide and 70 px in height.
And what to do if the group contains multiple clipping masks of different shapes/sizes?
I have a dynamic simulation which seems to have corrupted itself. I have a number of Revolution joints which are torsional springs. I’ve enabled joint torque and set a spring stiffness and a free position (+15 deg). Then on the ‘initial condition’ page I’ve set Max (+45 deg) and Min(-15 deg) Bounds on rotation angle and set a stiffness 10x the spring stiffness to simulate the end stops of my torsional spring. The initial position is +12 deg. This was working just fine but since I’ve added a couple more parts (nowhere near these springs) I constantly get the message “The parameter xxx value is out of bounds”. Where xxx is the ‘Initial position’ of the joint. If I edit the joint and untick the Bounds section the message goes away but if I tick it (which I need for my simulation) I get the error message as soon as I pick OK. The position is NOT out of bounds?
View 4 Replies View RelatedI save a document from .ai to .pdf in CS5 and it automatically goes to the size of the artwork bounds instead of the artboard or paper size.
View 7 Replies View RelatedBoth Adobe Cloud application the applications do not constraint to the screen resoluation, meaning that the Window menu in Illustrator for example has options that are inaccessible instead of creating a scrolling menu within the constraints of the screen.
View 1 Replies View Relatedtrying to have an applescript place a PDF as an Illustrator Link at the PDF's Media Box using "make new placed item". The only result possible as far as I can tell is a link at the PDF's Art Box.
I've seached around and have seen others with the same issue, but no answers as to whether it is actually possible. As with most Applescript stuff, I am either way overthinking it or it is not possible directly.
Currently I have a workaround using an Applescript script controlling Acrobat to sidestep the problem by setting the Art and Crop box to Media box, then place as a link in Illustrator, but it is not a direct route into illustrator.
I have also noticed that in the "Adobe Illustrator CS5 Scripting Reference" that the "PDF options object properties" do not honor the PDF crop bounds (except for the default value of Media Box). Is this an inherent problem with Applescript/Illustrator and PDF crop boxes? Could it be that the options for Open PDF and Place PDF are crossed?
I installed cs6 on my brand new Mac laptop yesterday. When I was done, I got a page that said I had over 400 errors during the install.Should I uninstall it and try installing it again?
View 1 Replies View Related2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
I am installing CS6 Design Standard on a MacbookPro 8 mgs ram, system meets all requirements. Yesterday Adobe Tech Support and I were on phone 3 1/2 hours trying to remedy the problem. NO GOOD. Still the same issue.
I get error messages and also when I get into the program it also states that the extension files are missing etc..But the install failed and Minibridge didnt install at all, and does not show up or work at all.
PS open and appears to work some but it states it failed to install and gives me the following error messages;
0 fatal / 4 error / 0 warning
Payload {4FFA830C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe Switchboard 2.0 2.0 0.0.0 ---------
Error: DF013: Failed to delete plist path at / Library/Launchdaemons/com.adobe.switchboard.plist{seq 20}
Error: DW063: ARKCmdFS.dylib:failed for command serviceinstall - error: 7 {Seq20}
Error DW050: The following errors were found during install:
Error DW050 - Adobe Switchboard 2.0: Install Failed
Error: DW050 - Adobe Mini Bridge CS6: Install Failed
I downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
View 2 Replies View RelatedWhen saving images as PSDS in photoshop CS3( using save as )and giving them a label, the image fails to save in a recognisable file. This file is then impossible to open. What I have found is if I type in any old letters eg yyy the photo is saved correctly, and I can then rename it with what I had intended.Any ideas as to why this is happening?
View 1 Replies View Relatedwhenever I try and install (In Vista 64bit) CS4 I get the error:
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 English Language Pack_x64
Error:
Error 2.
LangPack (English) for DeviceCentral
Error:
Error 2.
Does anyone out there know what causes the above errors with CS4 installation? Does anyone know the solution, a Google search provides some clues but none that seem logically worked out.
The only real solution I could find was one telling me to do some things with the public folder, I tried that and the did a clean reinstall and no dice.
I can't install camera raw. I've seen the same problems on the forum already, but unanswered. I get errors: "This is not the right kind of document" "Camera Raw editing is not enabled" I have creative design suite CS4, also bridge cs6. Ive tried uninstalling reinstalling photoshop. When i try both the camera raw 6_4 and 6_5 camera raw update they say "Update failed". When i try to install the Camera Raw 5.2, it gives me an error "Error opening file for writing:
C:ProgramDataAdobeCameraRawCameraProfilesAdobeStandard(all camera types).dcp Click Abort to stop the installation, Retry to try again, Ignore to skip this file
I have a serious problem with Photoshop cs6 during the drawing with a large number of forms (about 30 ...).Appear in drawing the colored squares, lines and other defects, randomly placed in the drawing.If I save the image, close and reopen itthe drawing is ok.
My system is:
Mac Pro
Mac OS X 10.7.5
Intel Xeon quad-core "Nehalem" a 2,8 GHz
12 GB (3 x 4 GB)
HD Serial ATA da 1 TB a 3 Gb/s e 7200 giri/min
ATI Radeon HD 5870 1 GB
i installed Photoshop cc on a Trail to check if it runs well on my pc, when i opend/or made any image on the main area were you edit the Graphics go mental at places were collor changes... even if you open a new image and use the gradient tool,its not gone be on the final image or anything its just in that window..
so i fought maybe theres something wrong with my AMD ATI HD7950 Graphic's card thats pretty new, but after reinstalling all of the drivers and software for it its still there, just went through the troubleshoot page.. (windows7)
I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe site [URL] says that my GPU will work with PSD 13.I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
Any KB articles or help with printing errors when printing directly from Photoshop to an HP 3600n color laser printer? The one at work prints out pages with a "Kernel error" and the one at home simply doesn't print even though it say it's processing documents. I understand PS conversion is done in software with this printer so it may be an HP problem.
View 2 Replies View RelatedI select a free transform object, the brackets form and I resize and click enter but the brackets do not go away.
View 1 Replies View RelatedPhotoshop CS6 has been working like a dream, and recently it has pushed some very large files.
But, upon trying to open Photoshop this morning, I get these two messages:
Could not load actions because an unexpected end-of-file was encountered.Could not initialize Photoshop because the Preferences file was invalid (it has been deleted). - although the file was still in the AppData...Adobe Photoshop CS6 Settings.
Tried to 'restore' Preferences:
Keyboard - CTRL ALT SHFT upon clicking PSD iconSaid 'Yes' to allow changes to systemStill received same two messagesRemoved the Adobe Photoshop CS6 Prefs.psp Restarted Photoshop, still received same two messages. Tried resetting, CTL ALT SHFT, again still same two messages.
Read Adobe thread to 'rename' the Actions Palette.psp, but keep it in the folder:
I renamed it 'renamed' and left the Adobe Photoshop CS6 Prefs.psp in the folder as well.Did not receive the 'load actions' error, butStill received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.Left the Actions as 'renamed', but removed the Adobe Photoshop CS6 Prefs.psp file as well.Still received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
I have a new Synology network drive that is formatted with the Synology native format, ext4. Photoshop CS5 works fine except that when I save a file to the drive, I get a "Can't build preview because of a disk error" message. However, after dismissing the dialog, the file saves and creates its icon in a normal manner, so the message is somewhat spurious. This is obviously annoying to have to dismiss the dialog every time I save a file.
I have three other network drives that are FAT32, and have no problems like this. The Synology drive can't be formatted FAT32.
I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors... what the basic/original ones should be in PS CS^6 Plug In folder?
View 6 Replies View RelatedI tried to start photoshop today and received two errors and the app will not start. I tried un-installing and re-installing (cloud apps), but I encounter the same errors
Can't post screen shots - you can't read them. First error says "Could not load actions as an unexpected end of file was encountered" The second one says "Could not initialize photoshop because the preferences file was invalid (it has been deleated)"
I haven't installed any new software. PS worked a few days ago, other programs working OK, even cloud stuff
