Photoshop :: Extended 4 Formatted Drive Causes Errors?
Feb 23, 2013
I have a new Synology network drive that is formatted with the Synology native format, ext4. Photoshop CS5 works fine except that when I save a file to the drive, I get a "Can't build preview because of a disk error" message. However, after dismissing the dialog, the file saves and creates its icon in a normal manner, so the message is somewhat spurious. This is obviously annoying to have to dismiss the dialog every time I save a file.
I have three other network drives that are FAT32, and have no problems like this. The Synology drive can't be formatted FAT32.
View 3 Replies
ADVERTISEMENT
May 1, 2013
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
View 1 Replies
View Related
May 10, 2013
The software appears to install on my windows vista op.sys machine BUT when I try to start photoshop CS3 it just hangs..tried to reinstall several times but still same.
View 6 Replies
View Related
Oct 1, 2013
I have to reformat my hard drive and reinstall photoshop CS6. Will Adobe recognize that I am not just installing the program on another computer but that I am using my legal software and let me use the program?
View 5 Replies
View Related
Feb 10, 2012
Bought my copy of Adobe Lightroom 3.2 loving the software. I have a question about isntallation. I may have to re-format my entire PC which means allthe programmes being wiped off. Now i have already installed Adobe Lightroom once will i be able to install it again after i have formatted my PC.
View 7 Replies
View Related
Apr 12, 2013
CS6 illustrator and photoshop not allowing me to open documents due to different reasons...damaged files, badly formatted, not compatible etc. However, these files were all created on the same computer and program therefore should be compatible. Is there a way for me to fix these files/prevent this from happening in the future?
View 1 Replies
View Related
Apr 2, 2012
I've found a lot of information on exporting BOM lists to excel, access, etc. but what I am trying to accomplish is to export assembly BOMs into a text file that I can import into our ERP software.
Our ERP software requires that the first character of the line be an 'S' then in the next 30 characters is the part number (trailing spaces are ignored) and then the quantity in the next 14 characters and finally the sequence of operations in the remaining 6 characters, a total of 51 characters per line.
I am using Inventor Simulation 2011 and thought that I might be able to do this by creating a custom rule; however, the BOM export snippets simply mirror the export features from the BOM table.
View 7 Replies
View Related
Jun 10, 2011
I need to make a pdf to upload my book to Createspace. I've read that I can format the book in Word 2010 using one of their templates.
I've also read that it won't handle photos well.
So I'm wondering if it's possible to import formatted text from Word into Xara Designer Pro 6, then add photos, then export a pdf file.
I tried importing one formatted page (I'm doing 6X9 inches) into a 6x9 page in Xara, but it pastes the whole thing as a lump that is the wrong size, way too big, and I would have to try to shrink it...
Is there a way to do this simply, that would be accurate for every page of a book?
View 7 Replies
View Related
Mar 6, 2013
I'm trying to open an .ai file in Illustrator CS6. I get an error message "Acrobat PDF File Format is having difficulties. Object label badly formatted" I have tried recovery mode and running recovery scripts to no avail.
I won't open or place in any other software. I can; however, see a preview in Bridge.
I'm not using any fonts software and there are no fonts present in the document. The file contains a lot of gradient mesh and a photo (.jpg, placed)
View 2 Replies
View Related
Dec 4, 2011
In an Inventor Drawing (.idw), dimensions are formatted (i.e., as decimal or fractional) based on the style selected for the dimension annotation. You can also force stacked-fraction formatting of specific numeric text within a text box.
However, text boxes don't seem to offer much control over retreived parameters. When you insert a value from the parameter table into your text box or leader text, the retrieved parameter always gets pulled in as a decimal number regardless of how it was formatted in the part's parameters table.
Are there any formatting functions that can be used within a text box or leader text to force fractional formatting for a retrieved parameter embedded within that text?
View 6 Replies
View Related
Jan 18, 2013
Is there a reference of the markup that is used with formatted text on drawings?
View 1 Replies
View Related
Aug 30, 2012
Currently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
View 3 Replies
View Related
Aug 10, 2012
1) I'm unable to designate an internal drive as a scratch disc (non boot drive). Drive is clean, empty, I've chkdsk'd, permissions set to full, I can read and write files on it, and I'm able to designate it as scratch for Illustrator but PS6 doesn't like it. Says I don't have access.
2) I upgraded to PS6 extended (cloud) and after a week it now hangs during startup at loading Nik Color Efex Pro 4 plugin. Hangs for about 3 minutes before continuing.
View 2 Replies
View Related
Jan 6, 2014
Using Elements 11 - My photos are taking over my hard-drive and I want to safely transfer all my photos and videos to an external hard-drive. How do I do it without loosing info and/or later having to re-connect thousands of pictures?
View 1 Replies
View Related
Feb 10, 2014
PSE11 transferred data from hard drive to external drive how do i direct PSE11 to new drive/catalog
View 2 Replies
View Related
Nov 15, 2012
I have Photoshop CS5 installed on my C drive. I recently bought an external terra drive and want to move Photoshop to the terra drive, as the C drive is pretty full and it's effecting PS's functionality. Do I have to uninstall and then reinstall on the external drive?
View 6 Replies
View Related
May 29, 2012
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies
View Related
Jul 30, 2012
While changing the media drive in Smoke setup via commenting out the current drive isn't a complicated process, I personally would find a more streamlined option useful. Something on the startup screen would be great: select project, user, media drive. When using FW800 drives, I typically try to have a discreet project drive that has everything on there for the current project. With the larger Thunderbolt raids, I am going back a little to the old system of having active storage and archive storage. However, when thunderbolt prices come down, I'll most likely have a separate drive for each project again.
View 1 Replies
View Related
Mar 1, 2012
I moved images from my harddrive to an external drive.
I opened Lightroom.
Noticed there was a question mark by the photo folder I needed.
I synchronized the folders. Nada.
I rememebered I moved the images (first line ^^)
I re-imported the images from the external drive into Lightroom.
These images (other than one that was marked previously with a blue label) look completely untouched - completely original files - even though I spent hours working on them.
I am glad the images weren't deleted BUT re-doing 600 images will be a MAJOR FAIL if I can't figure out how to import the images with the settings / developments I did beforehand.
View 5 Replies
View Related
Aug 18, 2013
I have about 900 raw files on an external drive. I edited those files using my master catalog using a laptop while still travelling. When I got home, I copied the master catalog from the external drive to the desk top, then opened the master catalog on my desktop. I can see the edited images on the external drive. So far so good.
I want to copy (add) the edited images to my desk top. I tried to export the images as a new catalog and then import it into the desire location on my desktop drive. However, LR5 does not allow that. I get this message: "There is nothing new in the catalog you have selected. All of the catalog's photos are up to date in this catalog." Yes, but the edited images are not on my desktop.....
I also tried to Import from the external drive and then Copy the files to the desktop, but then I lose all of the work done in the develop module and the keywords.
I watched Kost's LR 3 video on merging catalogs, but she dodges the question of how to deal with this issue since the "merge" is within the same catalog.I'm using LR5 with Windows 7.
View 4 Replies
View Related
Jul 5, 2012
I'm copying RAW files from a shoot onto my network RAID drive in a per-album folder, from where I then import into a new LR catalog (I'm using LR 4.1) on my Windows laptop for that album.
I'm finding that editing RAW files on a network drive from a wireless laptop is awfully slow (not to mention not being able to continue the work offline somewhere else), so I'd like to cache those files on my speedy SSD drive just until I'm done editing and exporting/publishing that album.
I back up my per-album catalog onto the network folder alongside the RAW files since that's my IT-managed master repository. When I'm done editing, I'd purge the cached files and just keep the catalog previews on my limited capacity SSD.
So, is there a way to tell LR to, for one/all files imported from a location (in my case a network folder), look in an alternate location for the identical files? Since I create per-album catalogs in per-album folders, there wouldn't be filename clashing. Either LR can provide this caching behavior on its own or I'd manually copy files from the network folder to a local folder and tell LR to look there first.
I don't really want to make copies of files into secondary folders within LR since then it's a hassle to merge edits on the cached copy to its master copy (I haven't done this, but I'd imagine so).
View 4 Replies
View Related
May 21, 2013
How can I move my Lightroom 4 catalog (data, not photos) from my local drive to an external drive? My local drive is running out of space.
View 3 Replies
View Related
Dec 26, 2013
I have my LR library and catalog on an external hard drive. I have a new iMac with a 3TB hard drive and I want to move the library and catalog from the external drive to the computer's hard drive. Is this something that can be done with a drag and drop?
View 2 Replies
View Related
Mar 5, 2012
I transferred my LR3 files from my WD hard drive to my new Lacie Thunderbolt drive and now I can only get the preview and it says the file is missing. Is there a setting I need to change that I am not aware of?
View 2 Replies
View Related
Sep 25, 2013
I am not changing anything in my system. I am using windows 7 and will continue to. No change in elements version (10). how to move my pictures from my computer hard drive to an external hard drive (this will NOT be a back up) but the primary locaton for my pictures. I will keep elements program on my computer and when I want to work on my pictures or download more pictures from my camera I will connect to the external hard drive.
View 10 Replies
View Related
Jan 11, 2014
How does moving files off my C drive affect Lightroom's ability to find them? I have flagged and labeled files - will they still be flagged and labeled? Will I have to import them again?
View 8 Replies
View Related
Dec 3, 2012
I have photos stored on a external hard drive, over time the computer changes the drive letter ie from "G" to "I" Lightroom there for is unable to see all the photos in drive G which is in fact the same drive.
View 1 Replies
View Related
Nov 4, 2013
I installed cs6 on my brand new Mac laptop yesterday. When I was done, I got a page that said I had over 400 errors during the install.Should I uninstall it and try installing it again?
View 1 Replies
View Related
Aug 1, 2012
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
View 18 Replies
View Related
Sep 7, 2012
I am installing CS6 Design Standard on a MacbookPro 8 mgs ram, system meets all requirements. Yesterday Adobe Tech Support and I were on phone 3 1/2 hours trying to remedy the problem. NO GOOD. Still the same issue.
I get error messages and also when I get into the program it also states that the extension files are missing etc..But the install failed and Minibridge didnt install at all, and does not show up or work at all.
PS open and appears to work some but it states it failed to install and gives me the following error messages;
0 fatal / 4 error / 0 warning
Payload {4FFA830C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe Switchboard 2.0 2.0 0.0.0 ---------
Error: DF013: Failed to delete plist path at / Library/Launchdaemons/com.adobe.switchboard.plist{seq 20}
Error: DW063: ARKCmdFS.dylib:failed for command serviceinstall - error: 7 {Seq20}
Error DW050: The following errors were found during install:
Error DW050 - Adobe Switchboard 2.0: Install Failed
Error: DW050 - Adobe Mini Bridge CS6: Install Failed
View 3 Replies
View Related
Sep 23, 2013
I downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
View 2 Replies
View Related
