i installed Photoshop cc on a Trail to check if it runs well on my pc, when i opend/or made any image on the main area were you edit the Graphics go mental at places were collor changes... even if you open a new image and use the gradient tool,its not gone be on the final image or anything its just in that window..
so i fought maybe theres something wrong with my AMD ATI HD7950 Graphic's card thats pretty new, but after reinstalling all of the drivers and software for it its still there, just went through the troubleshoot page.. (windows7)
In PS CS3 you could open as many graphical files as you wanted, move them around on the scrren, edit them, then create a new file and copy those into it creating a composite image.
Now, with CS6, I haven't figured out how to do that yet. If I load an image, it takes up the entire workspace, with rulers going negative to hugely positive with no reason to do so. If I load another image, I can't see them both unless I tile. if there is a way to put ALL files, say 10 of them all on ONE workspace at once? I'm almost ready to go BACK to CS3!
I opened a 16 bit image. When using the crop tool in default mode (NOT classic) when the entire canvas is visible (so not zoomed in), I switched to the crop tool, click on the canvas to get the crop rectangle, then zoomed in more and more. At some point the image goes black, with bits of image showing through, and further zooming reveals a bunch of noisy colorful pixels.
This does not happen in 8 bit mode.
I've not yet had this happen ever on any non-retina computer.
It does not happen when you start already zoomed in somewhat.
It does not happen when the crop tool is set to Classic mode.
It does not happen in Windowed mode, only in Full Screen With Menu Bar mode (so press F once).
I'm a Liverpool Football Club supporter and I'm not going to go into details, but we are making a new supporters group and we need a logo to go with our group.
Had an idea for a logo, take this Soviet badge: Keep the gold around the bottom and sides, have 'The Red Faction' along the bottom, retain the Red star and replace the hammer & sickle with a gold Liverbird. I would need this as a PNG graphical/logo image not simply using the current JPEG and editing it if that makes sense?
When rotating and viewing sectioned parts I keep having a graphical problem, normally I loose the face the part is sectioned through, leaving a view into the hollow shell of the parts. Other times the problems get worse and random sections become visible. This doesn't happen all the time and both of these problems are solved if you click on the part. I have included a pic of a test piece that hopefully illustrates what I am talking about.
I am running Inventor 2011 SP1, on windows 7 with a Nividia Quadro FX 580 with the latest drivers.
Using LR 4.1, I have uploaded a custom logo as my identity plate. When constructing a web gallery in the web module, I am unable to center the logo in the galleries I create - it always aligns left and looks terrible.
*** this is NOT a question about watermarking - I know how to center watermarks ***
I'm a long time LR user (currently LR 4.2), but just recently started producing a series of limited edition prints that include a graphical identity plate centered below the image. As LR insists on having to scale the identity plate, the result is that I can never produce a print where the text appears crisp and sharp. Rather there's always some perceptible softness in the text.
I'm using PhotoShop to produce the graphical identity plate and have produced it in the exact dimensions as it should appear beneath the print. When I bring it into the LR print module, however, it immediately scales it to 100% of the page size so I'm left with no option but to select a scaling % that most closely represents the original size.
Is there a solution to this? I only recently purchased PS CS6 and am thinking I should probably be doing this within that application, but honestly I'm just more comfortable in LR. For this print, I have the page size set to 20" x 30" and the cell size containing the image at 16" x 24". I think I know the correct process to duplicate this within Photoshop, but verify the procedure if LR isn't up to the task.
Whether the number of tabulations (for example in a ruled surface) changes the graphical/visual appearance of the surface or whether it actually affects the accuracy and subsequent quality of the surface when machined. In other words if you machined the object with a surftab1 set to 6 and the same object again but set to 32 would the latter be physically smoother after machining it?
The Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
I installed cs6 on my brand new Mac laptop yesterday. When I was done, I got a page that said I had over 400 errors during the install.Should I uninstall it and try installing it again?
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
I am installing CS6 Design Standard on a MacbookPro 8 mgs ram, system meets all requirements. Yesterday Adobe Tech Support and I were on phone 3 1/2 hours trying to remedy the problem. NO GOOD. Still the same issue.
I get error messages and also when I get into the program it also states that the extension files are missing etc..But the install failed and Minibridge didnt install at all, and does not show up or work at all. PS open and appears to work some but it states it failed to install and gives me the following error messages;
0 fatal / 4 error / 0 warning
Payload {4FFA830C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe Switchboard 2.0 2.0 0.0.0 --------- Error: DF013: Failed to delete plist path at / Library/Launchdaemons/com.adobe.switchboard.plist{seq 20} Error: DW063: ARKCmdFS.dylib:failed for command serviceinstall - error: 7 {Seq20} Error DW050: The following errors were found during install: Error DW050 - Adobe Switchboard 2.0: Install Failed Error: DW050 - Adobe Mini Bridge CS6: Install Failed
I downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
When saving images as PSDS in photoshop CS3( using save as )and giving them a label, the image fails to save in a recognisable file. This file is then impossible to open. What I have found is if I type in any old letters eg yyy the photo is saved correctly, and I can then rename it with what I had intended.Any ideas as to why this is happening?
Here is my latest attempt at an out of bounds image.. I don't understand why the lines of the photo are jagged... I did this rather quick but I am a little confused about the jagged lines... which by frustration left me leaving the image as is. Any ideas as to why this happened? I had made a rectangle and did a fill and deleted the inner part.. then when I transformed it I made sure to hold the shift key to keep it correct..
whenever I try and install (In Vista 64bit) CS4 I get the error:
Adobe Photoshop CS4 English Language Pack Error: Error 2.
Adobe Photoshop CS4 English Language Pack_x64 Error: Error 2.
LangPack (English) for DeviceCentral Error: Error 2.
Does anyone out there know what causes the above errors with CS4 installation? Does anyone know the solution, a Google search provides some clues but none that seem logically worked out.
The only real solution I could find was one telling me to do some things with the public folder, I tried that and the did a clean reinstall and no dice.
I can't install camera raw. I've seen the same problems on the forum already, but unanswered. I get errors: "This is not the right kind of document" "Camera Raw editing is not enabled" I have creative design suite CS4, also bridge cs6. Ive tried uninstalling reinstalling photoshop. When i try both the camera raw 6_4 and 6_5 camera raw update they say "Update failed". When i try to install the Camera Raw 5.2, it gives me an error "Error opening file for writing:
C:ProgramDataAdobeCameraRawCameraProfilesAdobeStandard(all camera types).dcp Click Abort to stop the installation, Retry to try again, Ignore to skip this file
I have a serious problem with Photoshop cs6 during the drawing with a large number of forms (about 30 ...).Appear in drawing the colored squares, lines and other defects, randomly placed in the drawing.If I save the image, close and reopen itthe drawing is ok.
My system is:
Mac Pro Mac OS X 10.7.5 Intel Xeon quad-core "Nehalem" a 2,8 GHz 12 GB (3 x 4 GB) HD Serial ATA da 1 TB a 3 Gb/s e 7200 giri/min ATI Radeon HD 5870 1 GB
I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe site [URL] says that my GPU will work with PSD 13.I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
Any KB articles or help with printing errors when printing directly from Photoshop to an HP 3600n color laser printer? The one at work prints out pages with a "Kernel error" and the one at home simply doesn't print even though it say it's processing documents. I understand PS conversion is done in software with this printer so it may be an HP problem.
Photoshop CS6 has been working like a dream, and recently it has pushed some very large files.
But, upon trying to open Photoshop this morning, I get these two messages: Could not load actions because an unexpected end-of-file was encountered.Could not initialize Photoshop because the Preferences file was invalid (it has been deleted). - although the file was still in the AppData...Adobe Photoshop CS6 Settings.
Tried to 'restore' Preferences:
Keyboard - CTRL ALT SHFT upon clicking PSD iconSaid 'Yes' to allow changes to systemStill received same two messagesRemoved the Adobe Photoshop CS6 Prefs.psp Restarted Photoshop, still received same two messages. Tried resetting, CTL ALT SHFT, again still same two messages.
Read Adobe thread to 'rename' the Actions Palette.psp, but keep it in the folder:
I renamed it 'renamed' and left the Adobe Photoshop CS6 Prefs.psp in the folder as well.Did not receive the 'load actions' error, butStill received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.Left the Actions as 'renamed', but removed the Adobe Photoshop CS6 Prefs.psp file as well.Still received the 'Preference file was invalid' message.Tried CTRL ALT SHFT to reset,Still received the 'Preference file was invalid' message.
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
I have a new Synology network drive that is formatted with the Synology native format, ext4. Photoshop CS5 works fine except that when I save a file to the drive, I get a "Can't build preview because of a disk error" message. However, after dismissing the dialog, the file saves and creates its icon in a normal manner, so the message is somewhat spurious. This is obviously annoying to have to dismiss the dialog every time I save a file.
I have three other network drives that are FAT32, and have no problems like this. The Synology drive can't be formatted FAT32.
I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors... what the basic/original ones should be in PS CS^6 Plug In folder?
I tried to start photoshop today and received two errors and the app will not start. I tried un-installing and re-installing (cloud apps), but I encounter the same errors
Can't post screen shots - you can't read them. First error says "Could not load actions as an unexpected end of file was encountered" The second one says "Could not initialize photoshop because the preferences file was invalid (it has been deleated)"
I haven't installed any new software. PS worked a few days ago, other programs working OK, even cloud stuff
