Photoshop :: Errors On Startup - App Doesn't Start
May 8, 2013
I tried to start photoshop today and received two errors and the app will not start. I tried un-installing and re-installing (cloud apps), but I encounter the same errors
Can't post screen shots - you can't read them. First error says "Could not load actions as an unexpected end of file was encountered" The second one says "Could not initialize photoshop because the preferences file was invalid (it has been deleated)"
I haven't installed any new software. PS worked a few days ago, other programs working OK, even cloud stuff
View 3 Replies
ADVERTISEMENT
May 3, 2011
I know that this sounds petty, but when i open up Autocad 2011 the grid is small and doesnt fill the entire screen like it use to or like it does in class. What settings should i check and change?
View 3 Replies
View Related
Jul 23, 2012
I downloaded Adobe Photoshop CS6 (Trial) and installed it. When I wanted to start it, it crashed immediately. Is my computer not good enough for Adobe Photoshop CS6? Because CS5 works fine on my PC...Here are some information about my PC
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.120504-1619)
Language: German (Regional Setting: German)
System Manufacturer: NVIDIA
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP, MMX, 3DNow, ~1.2GHz
Memory: 1024MB RAM
Page File: 759MB used, 4261MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
View 3 Replies
View Related
Aug 25, 2013
When I try to start the CC in 64 bit mode I get the error 0x0000005. (in 32 bit there is no problem)
I'm using Windows 7, 64 bit and have been using other Photoshop versions without any problem. My current version of Photoshop is CS6. I've updated the Nvidia driver and that didn't work.
View 1 Replies
View Related
Apr 28, 2013
Having installed Photoshop Elements 11(Windows 7) I cannot open the Organiser from the welcome screen. It can be opened via the Editor but few of the thumbnails are shown as pictures rather as empty squares. The situation does not improve with time but tends to get worse with pictures turning into squares. I have tried the tip with preferences but to no avail.
View 2 Replies
View Related
Oct 2, 2012
I'm experiencing many problems when modifying parts measures, adding extruxions or doing holes/threads.
Always same error: Operation doesn't produce a significant result. Redefine inputs
If Inventor is totally closed and reopened, I can modify and update parts without problems for 10-30 minutes, until first error, then it gives errors until closing again. Usually, but not always, operation preview begins to fail before first error. So it's quite difficult to reproduce.
I've tried uninstalling everything after Autodesk installation, windows updates and Firefox plugins (well, even Firefox itself) included. I've tried all hotfixes and updates that Inventor 2013 gives (NO SP1), even I've fully reinstalled Inventor. I've been using Inventor from Inventor 7 and never seen such errors.
I've attached a part from the pictures. Anyway, as errors are not always happening, maybe you won't have any problem with it.
PD: Also, a little problem is that with this Inventor version I can use the CTR+c CTRL+v to copy parts into an assembly. I can use the context menu but no shortkeys.
Autodesk Product Design Suite Premium 2013 (Installed yesterday, so with all official updates)
Windows 7 64bits Proffesional SP1
Intel(R) Xeon CPU W3565 @3.20GHz
NVIDIA Quadro FX 3800
8GB RAM
View 6 Replies
View Related
Dec 25, 2012
Photoshop Elements 11 and Premiere Elememts 11 cannot get started - launcher can be opened, but program doesn't start..I'm working with Windows 7 and I have already installed the newest drivers for the GeForce GTX 550 Ti - but still no start of the program after launching!
same applies to older installed version Photoshop Elements 8 and Photoshop Elements 10 which were working a couple of days ago.
View 1 Replies
View Related
Sep 3, 2013
I'm using an HP Envy x2, which is a tablet-laptop hybrid with an attachable keyboard, and I'm having an issue with Adobe Photoshop Elements 11.
When I attempt to start a new line of text in a text layer by pressing "Enter," it doesn't let me start a new line of text; instead, it stops editing the text layer altogether. I would like to be able to press "Enter" and have PSE11 start a new line of text in the text layer; I have been using Elements to create graphics since 2007 and have never encountered this problem.
I have already tried:
- Uninstalling and re-installing PSE11
- Ctrl + Enter, Shift + Enter, Fn + Enter
- Resetting the type tool
- Making sure the spacing is set to Auto
- Turning on and off the Num Lock key via on-screen keyboard
View 7 Replies
View Related
Jan 20, 2014
I have recently exchanged my HDD with a new SSD disc on a Macbook Pro running Mavericks. I have put an image of my original disc on the SSD and after installation everything runs fine as it should, except of Illustrator CS5, which doesn't even start up.I get the following error:
Adobe Illustrator cannot be opened because of a problem.Check with the developer to make sure Adobe Illustrator works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
If I actually plug in my old HDD as USB disc and start CS5 there, it runs no problem. Hence it doesn't seem to be a problem of the OS (anyway, it worked fine before changing the discs).The detailed crash report follows:
Process: Adobe Illustrator [565]Path: /Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe IllustratorIdentifier: com.adobe.illustratorVersion: ???Code Type: X86 (Native)Parent Process: launchd [150]
Responsible: Adobe Illustrator [565]User ID: 501
Date/Time: 2014-01-20 20:03:01.639 +0100OS Version: Mac OS X 10.9.1 (13B42)Report Version: 11
[code]....
View 1 Replies
View Related
May 1, 2011
I'm trying to record from the pinacle 700-usb device in Corel VideoStudio, however it gives me an error saying: "Kan vastleggrafiek niet starten" (it's dutch). Meaning something like "Cannot start the recordinggraph" (or something like that). The error is shown below.
I can record and playback from my webcam. That works perfectly, so it is installed correctly i suppose?what causes this and how can i make VideoStudio record from my pinacle device?
View 1 Replies
View Related
Dec 30, 2013
When I try to connect my Nikon D610 with a USB cable to import RAW files (i.e. .NEF), I need to open manually LR and click on the Import button to start importing even if Automatic Import is activated.
View 1 Replies
View Related
Nov 12, 2013
why doesn't gimp remember windows toolbar dock setup at the start on the left hand side and the right side?
View 2 Replies
View Related
Dec 1, 2013
I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies
View Related
May 23, 2012
Bridge doesn't Start, Bridge mini is running (PS6)MacPro, i7, OSX 10.7.4
View 2 Replies
View Related
Feb 22, 2012
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies
View Related
Apr 28, 2013
I got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
View 9 Replies
View Related
Mar 20, 2014
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies
View Related
Jun 10, 2013
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies
View Related
May 15, 2011
I just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies
View Related
Apr 18, 2012
I have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
View 3 Replies
View Related
Nov 4, 2013
I installed cs6 on my brand new Mac laptop yesterday. When I was done, I got a page that said I had over 400 errors during the install.Should I uninstall it and try installing it again?
View 1 Replies
View Related
Aug 1, 2012
2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected. I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4. I have not tried Mac OS X 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
View 18 Replies
View Related
Sep 7, 2012
I am installing CS6 Design Standard on a MacbookPro 8 mgs ram, system meets all requirements. Yesterday Adobe Tech Support and I were on phone 3 1/2 hours trying to remedy the problem. NO GOOD. Still the same issue.
I get error messages and also when I get into the program it also states that the extension files are missing etc..But the install failed and Minibridge didnt install at all, and does not show up or work at all.
PS open and appears to work some but it states it failed to install and gives me the following error messages;
0 fatal / 4 error / 0 warning
Payload {4FFA830C0-007A-4DB3-955C-B5EEE73BEDAF} Adobe Switchboard 2.0 2.0 0.0.0 ---------
Error: DF013: Failed to delete plist path at / Library/Launchdaemons/com.adobe.switchboard.plist{seq 20}
Error: DW063: ARKCmdFS.dylib:failed for command serviceinstall - error: 7 {Seq20}
Error DW050: The following errors were found during install:
Error DW050 - Adobe Switchboard 2.0: Install Failed
Error: DW050 - Adobe Mini Bridge CS6: Install Failed
View 3 Replies
View Related
Sep 23, 2013
I downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
View 2 Replies
View Related
Jun 21, 2008
When saving images as PSDS in photoshop CS3( using save as )and giving them a label, the image fails to save in a recognisable file. This file is then impossible to open. What I have found is if I type in any old letters eg yyy the photo is saved correctly, and I can then rename it with what I had intended.Any ideas as to why this is happening?
View 1 Replies
View Related
Apr 2, 2007
Here is my latest attempt at an out of bounds image.. I don't understand why the lines of the photo are jagged... I did this rather quick but I am a little confused about the jagged lines... which by frustration left me leaving the image as is. Any ideas as to why this happened? I had made a rectangle and did a fill and deleted the inner part.. then when I transformed it I made sure to hold the shift key to keep it correct..
View 9 Replies
View Related
Feb 10, 2009
whenever I try and install (In Vista 64bit) CS4 I get the error:
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 English Language Pack_x64
Error:
Error 2.
LangPack (English) for DeviceCentral
Error:
Error 2.
Does anyone out there know what causes the above errors with CS4 installation? Does anyone know the solution, a Google search provides some clues but none that seem logically worked out.
The only real solution I could find was one telling me to do some things with the public folder, I tried that and the did a clean reinstall and no dice.
View 6 Replies
View Related
Sep 29, 2012
I can't install camera raw. I've seen the same problems on the forum already, but unanswered. I get errors: "This is not the right kind of document" "Camera Raw editing is not enabled" I have creative design suite CS4, also bridge cs6. Ive tried uninstalling reinstalling photoshop. When i try both the camera raw 6_4 and 6_5 camera raw update they say "Update failed". When i try to install the Camera Raw 5.2, it gives me an error "Error opening file for writing:
C:ProgramDataAdobeCameraRawCameraProfilesAdobeStandard(all camera types).dcp Click Abort to stop the installation, Retry to try again, Ignore to skip this file
View 3 Replies
View Related
Nov 16, 2012
I have a serious problem with Photoshop cs6 during the drawing with a large number of forms (about 30 ...).Appear in drawing the colored squares, lines and other defects, randomly placed in the drawing.If I save the image, close and reopen itthe drawing is ok.
My system is:
Mac Pro
Mac OS X 10.7.5
Intel Xeon quad-core "Nehalem" a 2,8 GHz
12 GB (3 x 4 GB)
HD Serial ATA da 1 TB a 3 Gb/s e 7200 giri/min
ATI Radeon HD 5870 1 GB
View 1 Replies
View Related
Jun 26, 2013
i installed Photoshop cc on a Trail to check if it runs well on my pc, when i opend/or made any image on the main area were you edit the Graphics go mental at places were collor changes... even if you open a new image and use the gradient tool,its not gone be on the final image or anything its just in that window..
so i fought maybe theres something wrong with my AMD ATI HD7950 Graphic's card thats pretty new, but after reinstalling all of the drivers and software for it its still there, just went through the troubleshoot page.. (windows7)
View 1 Replies
View Related
Nov 20, 2012
I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe site [URL] says that my GPU will work with PSD 13.I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
View 1 Replies
View Related
