Using LR 4.1, I have uploaded a custom logo as my identity plate. When constructing a web gallery in the web module, I am unable to center the logo in the galleries I create - it always aligns left and looks terrible.
*** this is NOT a question about watermarking - I know how to center watermarks ***
I'm a long time LR user (currently LR 4.2), but just recently started producing a series of limited edition prints that include a graphical identity plate centered below the image. As LR insists on having to scale the identity plate, the result is that I can never produce a print where the text appears crisp and sharp. Rather there's always some perceptible softness in the text.
I'm using PhotoShop to produce the graphical identity plate and have produced it in the exact dimensions as it should appear beneath the print. When I bring it into the LR print module, however, it immediately scales it to 100% of the page size so I'm left with no option but to select a scaling % that most closely represents the original size.
Is there a solution to this? I only recently purchased PS CS6 and am thinking I should probably be doing this within that application, but honestly I'm just more comfortable in LR. For this print, I have the page size set to 20" x 30" and the cell size containing the image at 16" x 24". I think I know the correct process to duplicate this within Photoshop, but verify the procedure if LR isn't up to the task.
I just installed the new version LR 5.4 but I can't change the identity plate. It's not a major problem, but it annoyes me because it's always the first thing I do...
View 4 Replies View RelatedHave just installed Lightroom V4.3.
I cannot get my Identity plate to show.
I recently downloaded the 4.3 version of Lightroom. I tried to use the IDENTITY PLATE to watermark a photo and print it out and the function does not appear to be working..I have used the feature many times in previous veresions. I am able to see prior versions of my watermark under the edit tab, but they do not show up on the photo...
View 18 Replies View RelatedOn both the main pages and especially on print page. this seemed to have happened when I updated to 4.3 Is there a solution?
View 5 Replies View RelatedI am trying to produce postcards from one single image with Lr template 2-Up Greeting card, but can apply identity plate only once. How can I use identity plate twice on one A4 sheet with 2 images, so each image is with the same text?
View 1 Replies View RelatedWhen doing this for a pdf or slideshow, the text I enter is at 1/2 way point down of the little white box. how to get a new line of text. I hit enter and that just closes the window. So I have to make one long line, and even then it starts to dissapear from view at the bottom of the window.
View 6 Replies View RelatedAccording to the Help for Lightroom V1.0, I can choose to print my identity plate on each image on the page:
>To have the identity plate appear on every photo in a multiphoto template, select Render On Every Image. The identity plate is centered on each photo and can be moved, scaled, or rotated using the controls in the Overlays panel.
I can move the ID if it is rendered only on one image.
I cannot figure out how to move the ID plate once I have clicked "render on every image." It seems to be fixed in the center of each image.
I created a Web Gallery and forgot to update the folder name for the FTP server.
How can I update the saved gallery? If you change module and double click again on the saved gallery icon, the changes are lost.
Here is what I get via right click:
How do you solve this without the need to delete and save the gallery again?
Is there a method to move gallery tabs so that Page & Layer Gallery tab is first in line (at the top) of docked gallery tabs at the right of the screen? I can move gallery tabs, but cannot make Page & Layer gallery tab move to the top.
View 3 Replies View RelatedUsing Win7 64bit + PS CS6 64 bit ext on a 16GB PC. In which folder do I find the web gallery templates for Bridge CS6? Is there info available on how the programming/ configuration works with the info passed by Bridge - filename, contact info, copyrights, description/title, email, etc.
View 1 Replies View RelatedI've had a great time using the Web Photo Galleries in Photoshop CS and CS2, especially since I'm fairly deft with HTML and a total Flash dunce, so the Web Photo Gallery Flash 1 and Flash 2 templates have served me well and allowed me to make fun Flash stuff without having to learn. But, with learn-by-doing, there often comes a point of confusion, and I think I've found mine.
I noticed that (when using the gallery "Flash 1"), if I click the little ? in the bottom right, the file name will come on and stay on throughout all the pictures. This is exactly what I want since that's where I do all my captioning and it really adds something for me to be able to see that. My question: how in the world do I get it to do this by default? I'm always telling friends/family, "oh, click the little ? in the bottom right and it'll show the captions," but am certain there must be some way to do this by default.
I fiddled in the galleryconfig.xml file, but there's only this line
HTML Code:
<var symboltype="boolean" name="showHelpButton" value="true" />
which actually just tells the button to be displayed, but not for the thing that happens as a result of pushing the button to stay displayed.
In version 9. How do I get the gallery tabs at the bottom, for a gallery pane docked on the right?
View 2 Replies View RelatedJust installed 3ds Max 2013 and I am having some graphical glitches in the UI.
Attached a picture of the issues.
I import a gallery into LR 5. It shows up on the list on the left side. I click on the folder. The folder opens but the thumbs are dimmed. I can't undim them. I can open a single file but can't Develop it or do anything with it. I can't even Delete the folder so I can try again.
This happens over and over again. Yes, I'm new to LR but this is ridiculous.
Specify web gallery layouts?
View 2 Replies View RelatedIn making a web gallery is there a way to make some minor changes and resave the web gallery?I find I have to delete the existing web gallery then recreate it then save it again ?
View 4 Replies View RelatedIn PS CS3 you could open as many graphical files as you wanted, move them around on the scrren, edit them, then create a new file and copy those into it creating a composite image.
Now, with CS6, I haven't figured out how to do that yet. If I load an image, it takes up the entire workspace, with rulers going negative to hugely positive with no reason to do so. If I load another image, I can't see them both unless I tile. if there is a way to put ALL files, say 10 of them all on ONE workspace at once? I'm almost ready to go BACK to CS3!
i installed Photoshop cc on a Trail to check if it runs well on my pc, when i opend/or made any image on the main area were you edit the Graphics go mental at places were collor changes... even if you open a new image and use the gradient tool,its not gone be on the final image or anything its just in that window..
so i fought maybe theres something wrong with my AMD ATI HD7950 Graphic's card thats pretty new, but after reinstalling all of the drivers and software for it its still there, just went through the troubleshoot page.. (windows7)
In Bridge, they have a way to get an excel file of a web gallery, which is so useful. Only thing is now I make my web galleries in LR, and I shuffle image order around. Any way to do that with LR too?
View 18 Replies View Relatedwhen I click under the web gallery and I selected a flash gallery or imported web galley (example here is airtight simple viewver...) ... the screen in the middle box keeping black nothing more.it's when I click under flash gallery.there is no photo adding ...
Previously it worked I saw when I clicked under airtight post card viewer web gallery ... all my photo getting on the middle screen..Now it only works with HTML lightroom gallery.More when I click under preview in browser some gallery works but some not ... when I said not ... the result is a black screen in IE or Firefox ...
I tried to uninstall and re install lightroom but result is the same .
I cant connect my lightroom gallery to my website what do I need to do
View 1 Replies View RelatedI'm using a Mac, Lightroom 3 uploading to a host monster.com server. the Lightroom HTML gallery displays fine when exported and opened offline but when uploaded to my server, backgrounds and navigation and cells appear fine but all the photos appear to be missing. the source code appears to have the correct path. When I've seen this question earlier users suggest that the photos are being put in a bin file but mine look to be in the correct path on the server. Other users suggest changing code in some Lightroom files perhaps using the SDK but I can't find the files they suggest changing (I think they might have been on pcs instead of macs). .
Here is a link to the page [URL] ....
I am working with the Web module in Lightroom 4 (now 4.4) to create an online gallery with photos. I like the layout of the HMTL default template and would like to use. The only problem I found is that I can't seem to find a way to change the size of the thumbnail images and the enlarged photo that appears once the viewer clicks on the thumbnail.
View 16 Replies View RelatedAFter you import images, what is the best way to then exclude some of the images before making a web gallery?
View 12 Replies View RelatedIs it possible to have a web gallery on a SilverStripe website? I can upload it but I don't see where I can import it as a file. Works fine while viewing in web browser.
View 2 Replies View RelatedMy current website has Flash-based galleries created in LR using SlideShowPro. I want to create an alternate web gallery for viewing on the iPad and iPhone. Any LR web gallery plug-in for this purpose? If possible, I'd like the gallery to work the way the iPhone Camera Roll works, but at very least, I'd like viewers to be able to simply flick their way through the images.SlideShowPro Director does this, but I'm not quite ready to take on its complexity.)
[URL]
I want to re-create a html-web gallery that I used in CS4 and that was integrated in my own website. I wonder where the template are stored i Lightroom on a a Mac, so I'm able to copy and modify them.
View 3 Replies View RelatedIs there a lightroom web gallery plug in where it creates a gallery where people can just check the box/like their favorite photos and then I can see what has the top votes?
View 1 Replies View RelatedI have a problem saving a web gallery locally: I originally build/saved/uploaded a web gallery (www.myreimannfamily.de >dogs < Inouk and Tofino >2013).I now modified/added pictures to this gallery and tried to save it again locally. Got the error message:
export did not complete successfully it then showed all pictures in the collection then the message: JPEG files were generated using the best pixel data available in the image cache the local web gallery structure (content, resources...) were correctly created but all files were completely empty All image files are there and can be modified at high resolution in the Develop mode.
Since the original set up of this gallery I:
upraded to LR 5.3
converted some .nef files to .dng
If I delete the saved web gallery and create the same gallery from scratch, the same problem/error message pops up. Construction of other web galleries is no problem (up to now)
