How do you get an image to look like it is coming out of the TV screen? I have seen this effect in several ads and it drives me crazy to know how it was done. I saw a guy walking out of the TV screen, and I saw a car driving out of the TV screen.
View 1 RepliesSo I'm cropping to a square, but I want the crop to extend off the image area because I want to replace the missing bit in photoshop. This effectively makes the image bigger than the original. the only way to achieve the same effect is to scale the image, that keeps the pixel dimensions the same but effectively reduces the size of the image.
is there a way to crop beyond the image bounds?
I want to crop several images in same aspect ratio.So I checked "Fixed" option and set proper values in tool box.
And sometimes I want to complement image with background color if selectionis larger than original size. In this case, I add a larger layer bottom of the image and crop it.
But it would better if I can do it by one action.Therefore I'm trying to write a script-fu for it, but I'm stuck now.
Because a function `gimp-selection-bounds` returns points only inside ofthe image even if the selection is outside of image.
Is there a way to get bounds of selection outside of a image by usingscript-fu?
Here is my latest attempt at an out of bounds image.. I don't understand why the lines of the photo are jagged... I did this rather quick but I am a little confused about the jagged lines... which by frustration left me leaving the image as is. Any ideas as to why this happened? I had made a rectangle and did a fill and deleted the inner part.. then when I transformed it I made sure to hold the shift key to keep it correct..
View 9 Replies View RelatedIn the Shake Reduction Filter, what do you look for in the image, and how do you use the Blur Trace Bounds slider to optimize its function?
View 2 Replies View RelatedCan I have photos I make with out of bounds and layers printed?
View 1 Replies View RelatedWhen i hatch an area, i's fine, but when i match prop to another (witch is out of bounds) it goes out of bounds.
All of my hatches went out of bounds at some point.
Okay, So when you use a clipping mask there can sometimes be a lot of art that is invisible. If you "Select All" you'll get a rectangle only around what's visible. I want the bounds of that rectangle.
I tried itterating the art but I don't think that the art type is the best way to figure this one out. And if you use AIGroupSuite to test if an art group is "clipped" with GetGroupClipped, you get the bounds of the larger art that I'm trying to avoid.
I didn't see anything about bounds of a "selection" in the docs.
I've not had to deal with metes and bounds info in a very long time. For one project I have to generate the info for a couple parcels. From looking around it looks like there's a tool in ACAD Civil. Is there something similiar in Map3D?
View 2 Replies View Relatedhow to get/determine the visible bounds (top+left coords and width+height or Rect structure) of a group having a clipping mask or several masks? When a script asks for Visible Bounds, Illustrator provides the coords/size of the group like it does not have any clipping mask. So, you see a circle of 10px diameter (and these are the actual visible bounds of this group), but Illustrator says that the visible bounds are 50 px wide and 70 px in height.
And what to do if the group contains multiple clipping masks of different shapes/sizes?
I have a dynamic simulation which seems to have corrupted itself. I have a number of Revolution joints which are torsional springs. I’ve enabled joint torque and set a spring stiffness and a free position (+15 deg). Then on the ‘initial condition’ page I’ve set Max (+45 deg) and Min(-15 deg) Bounds on rotation angle and set a stiffness 10x the spring stiffness to simulate the end stops of my torsional spring. The initial position is +12 deg. This was working just fine but since I’ve added a couple more parts (nowhere near these springs) I constantly get the message “The parameter xxx value is out of bounds”. Where xxx is the ‘Initial position’ of the joint. If I edit the joint and untick the Bounds section the message goes away but if I tick it (which I need for my simulation) I get the error message as soon as I pick OK. The position is NOT out of bounds?
View 4 Replies View RelatedI save a document from .ai to .pdf in CS5 and it automatically goes to the size of the artwork bounds instead of the artboard or paper size.
View 7 Replies View RelatedBoth Adobe Cloud application the applications do not constraint to the screen resoluation, meaning that the Window menu in Illustrator for example has options that are inaccessible instead of creating a scrolling menu within the constraints of the screen.
View 1 Replies View Relatedtrying to have an applescript place a PDF as an Illustrator Link at the PDF's Media Box using "make new placed item". The only result possible as far as I can tell is a link at the PDF's Art Box.
I've seached around and have seen others with the same issue, but no answers as to whether it is actually possible. As with most Applescript stuff, I am either way overthinking it or it is not possible directly.
Currently I have a workaround using an Applescript script controlling Acrobat to sidestep the problem by setting the Art and Crop box to Media box, then place as a link in Illustrator, but it is not a direct route into illustrator.
I have also noticed that in the "Adobe Illustrator CS5 Scripting Reference" that the "PDF options object properties" do not honor the PDF crop bounds (except for the default value of Media Box). Is this an inherent problem with Applescript/Illustrator and PDF crop boxes? Could it be that the options for Open PDF and Place PDF are crossed?
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedI photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies View RelatedI'm putting together a series of images, and I want the horizon line to be a constant from image to image, though they were not that way in the original files. I'm assuming that I should go with the picture that has the smallest distance from the bottom of the picture and then crop the others so the distance appears to be the same in them as well. But is there a way to make that a simple process?
View 1 Replies View RelatedWas really wanting to get the first image at the end of a spotlight inserted in the second image of the city off in the distance. Kind of like how the batman symbol is in the spotlight. The symbol is my churches logo and was wanting to use it for our Instagram.
Attachment 36457
Attachment 36458
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View Related