I am unable to open a 1.7 mb file in photoshop 6. I had it opened about 3 weeks ago but made no changes. I downloaded a new copy of the file thinking my version was corrupted but no luck. I am running windows xp, 2.8 ghz celeron and just installed an additional 2gb of ram.
 Naturally, photoshop is the only program i had running after a restart aside from the minimal startup windows nonsense. Short of buying a mac or the latest version of photoshop, what can I do? Many thanks for any input. On a side note, I am able to open a 4.8 mb companion file to the one in question. Both are .psd files.
I have Photoshop CC and when I open a file I have a notice about the memory and a URL to go [URL]... in order to solve the problem but when I go to that page I am told that it isn't available. What can I do?
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.When it starts, these two messages are displayed: Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program.
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program.
I've recieved a drawing from a customer and i'm unable to load it. When I open it, it asks to be recovered because of a damaged file. I hit the recover button and starts to load the file but after a while comes up with an error saying "FATAL ERROR: Out of memory - shutting down." Is the file just corrupted? My memory isn't even being used. Specs are i7-2600 3.40 ghz, 16gb ram and sli nvidia 570 gtx cards.
I've also tried the recover command, but it did the same thing.
There was a second drawing they sent me too, but it comes up with a fatal error 0x0050. I've attached both drawings.
I've been working on an image for about 4 hours... (PHOTO PAINT X4) The screen is now frozen with a small box saying ''out of memory'' I haven't saved the file for a few hours. Or has all this work now gone. I now also have this message with no text, what it might be and which button I should press!? Or is there some sort of shortcut to save.
I'm having a problem with my recently installed copy of PS CS6 (with the latest update).
My system: PC with Intel Core i3-540 (not over-clocked: 3.06GHz) and 4GB RAM running Windows XP SP3. The graphics card is an ATI Radeon HD5450.
The problem: When I first launch Bridge and CS6, everything is working fine. But after 10 minutes or so, ACR starts acting up. Specifically, edits become increasingly sluggish and ultimately the image won't transfer into PS. Instead, I receive the message: "Could not complete the Open As command because there is not enough memory (RAM)".
I do not have any other programs open (aside from Bridge) when this happens.I would have thought that 4GB of RAM would be a sufficient amount of memory.
I am not using the boot drive as the PS scratch drive.
Two more bits of information: (1) I have the Memory Usage slider set to 80%; (2) Cache value is 1,024.
Photoshop CS6 runs away with memory after being used and then going idle. If I open up PS and leave it, it will be ok but as soon as I open any file it will go up in memory usage (which is normal) but when I close all files and hide PS the memory will stay high never goes back down. When I close PS and re-open (no files open) again it idles at 300Mb memory but when I open a file then close it and then hide/idle PS it raises and stays around 1.25-1.5 GB if not more.
I have tried to Purge All, and even hide all menus to no avail. I have even tried to close Suitcase (eliminate any font issues) and still same problem. I am running PS bone stock, no extra plug-ins.
My Computer: Photoshop 13.0.1 MacBookPro OS 10.6.8 CPU: 2.66 GHz Intel Core 2 Duo Mem: 4 GB 1067 MHz DDR3 HD: 300GB (30GB Free)
I accidentally deleted some photos from a memory card. I recovered them using software called "Recover My Files". This software recovered the files but now I can't open them in CS3. I took these with an old Canon Rebel DSLR and they should not need converting, they opened fine before I deleted them.
I'm working on a 48 meg file, but my RAM usage was up to 13.9 gigs. I just restarted Ps and opened the file and it's up to 10.7 gigs.
Previously I was always maxing out 10 gigs everyday out of 12 available gigs in the machine also working on small files.( 25-30 meg on average) IT tried playing with things forever and finally just tried ordering more RAM. They ended up putting 28 Gigs in the box. And I'm really not seeing any advantage in Photoshop, other than my system still runs OK outside of Ps while I'm working. well Rhino 3D still crashes from being out of memory, even though there was still 6 gigs free?
I'm just drawing, no filters, not too many layer masks. I do have maybe 15-20 vector smart objects in the file, and I'm at 147 layers. The issue I was having is Pen lag on the Cintiq when I draw starts getting horrible as the RAM usage gets higher. I had been restarting Photoshop constantly to get it to release RAM. But I haven't the last couple days since they doubled the RAM in the machine. And obviously on restart the file still needed a lot of RAM???
I can live with the lag, sucks, but I can still work. I just don't understand why these small files are using so much RAM. Back in the day on 32 bit systems with 4gigs of RAM I would sometimes create posters/covers/magazine spreads that were 1.5- even 4 gigs that would have to be saved as Tiff's because PS didn't support a file that big. This machine runs like that everyday. At home I've been doing some freelance book covers that get up to 450 megs now and then and it still runs better, Cintiq at home draws smoother than this machine that costs 3-4 times more!
It's a win 7 64 bit box, 2 Dual core 2.4 Xeons. two quadro 2000's, now 28GB ram, OS on a 560?GB drive with files on a Terrabyte drive that gets backed up. My hardrives arent rated very high, 5.9, but at least im working local to the machine as the network is slow.
When I try open a saved CAD LT 2013 file I get an Error message saying 'FATAL ERROR: Out of memory'..The file had crashed while I was working on it and the automated recover files won't open, says: 'drawing file invalid'
I can open other files.What does this mean and can the file be recovered?
Lightroom 5.0 fails to detect memory card and open import dialog. This has always worked fine in Lightroom 4, 3,and 2. Same cards, same camera, same iMac using OS X 10.8.4. Manual importing works OK, card is detected just fine.
I am working with files in photoshop through my extrenal hard drive. The files that I am working with are 460Mb each. One of the problem I usually get when I create more than one layer is that my scratch disk is full.
My laptop hard drive free space is only 5 Giga. I wonder if I can preform an action in photoshop saying that my temporary work will be stored on my external hard drive and not on my laptop hard drive.
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
I am getting this message when I try and export an AI file as .psd file. Illustrator is the only app open on a new 24" iMac running 10.5.4. The illustrator file itself is only about 5 mb. Yet . . .I get the message "Not enough memory to save file."
I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it...
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
I have a large file (17000KB) and it keeps crashing saying it is out of memory. Is there a good way to deal with this file? I can open it and try to delete parts of it but then when I try to save or save it as a different doc, it will crash.
have been using PSP8 for a long time with no problems. i regularly copy files from my HD to a memory card but recently i have been getting the following error message for no apparent reason:
cannot copy [filename]: the directory or file cannot be created
if i try to copy a batch of files this does not happen for all files - just more recent ones. so half the files get copied, the others don't. i have checked file properties old files vs new and cannot see any difference. my memory card is not full.
I have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
I'm trying to plot a pdf file that is approx 1MB. We have a HP designjet 500 plus, with 32MB of Ram. When I try to plot it though, The plotter displays a messag: 'Out of memory. Data Lost'. I unfortunately only have the PDF file. Is there any way for me to plot this file?
I tried to print it as a pdf by using a virtual pdf printer, but the end result is the same.
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
I love tethered Shooting but as default (at least for Nikon) Lightroom does only save the file on the computer, not on the memory card.
Now I want to have a backup of the image file on the memory card additionally to downloading it. The tethering software digiCamControl can do this with my camera, so it is technically possible.
So how can I achieve this using Lightroom tethering?
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
