I'm printing 10 same things on A4. But now I'm printing them 10 times plus back side, then it's 20 times, annoying much. How can I set photoshop(or what else?) to copy my one image like 10 times vertically automatically when printing. If I edit the one original image, I could just print it 10x once?
View 1 Repliesi used the page setup and creat new setup to print some area ..
ist possible to make a setup to print multi area .. - when i creat new one it ask to select what i want to print , but it just ask once ,if i want to print other thing i need to creat new setup ...
what i need is to selcect multi time .
When I construct a multi image contact sheet and send it to my printer the file is aborted. Mac Pro, 15 GB ram, OSX 10.6.8, Epson 7890. LR4.
View 2 Replies View RelatedI have found that if you publish to single-sheet .pdf's and then combine the .pdf's into one file using Acrobat, each sheet is bookmarked using the name of the individual files for the bookmark names. However, if you publish to a multi-sheet .pdf, no bookmarks are created. Is there any way to create multi-sheet .pdf's in AutoCad and have bookmarks automatically inserted (using the name of the layout as the bookmark name)?
View 3 Replies View RelatedThis is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI need to get a multi-layered image into another multi-layered image keeping all the layers/effects of both images. Can't seem to just copy/paste and I don't seen import function.
View 2 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedWe received a jpg file that seems to gave 2 pages when you view it in Bridge.
When we open the file in Photoshop or link it in Indesign or Illustrator we only see the 1st page or view of the file.
I was very surprised to see this in Bridge, as far as I know it is not possible to even make a multi page jpg file.
Does Photoshop CC support multi GPU like Cinema 4D? Would be nice to read a "Yes"
View 3 Replies View RelatedOkay, well I'm not really new to photoshop, like I can put pictures together and whatnot, but I was wondering how to separate Multi Burst photos. When I take them on my camera it's like they're all separate pictures, but on the computer it ends up becoming one big picture.
View 1 Replies View RelatedI had no significant problem of creating a panorama picture by stitching HORIZONTALLY many (up to 35) pictures. Is PS capable of automatically stitching vertically too? The idea is to accomplish multi-raw panorama. That is, if in addition to a wide view, I want also the panoramic picture cover significant hight. The idea is to sweep the horizon at a certain vertical angle.
Then, sweep at a lower level and creating a panoramic view of both sweeps. If not fully automatic, then create a photomerge and create 2 panoramic picture. Then automatically stitch the two panoramas vertically.
if there is a way to apply an image resize to multiple images, so i don't have to select each pic past it into a smaller canvas and then resize it to fit,
View 4 Replies View RelatedI discovered this "new" function on my camera today (just bought it recently and I'm still just playing around with it). A thingy called Multi-Shot where the camera takes 16 pictures in about 2 or 3 seconds and then makes it into a single image. Where you can see all the frames, which end up at a resolution of about 400*300 on the 7mp total resolution.
Is there any way possible to make photoshop automatically take my 16-pic multishot picture, take every single frame, crop it and save it as a separate image file? So I end up with 16 different pictures instead of one containing all the frames?
If i like to resize (no transformation) my textarea in Photoshop CS3 on my Q6600 Quadcore I always get a font size of --21474836,, Px ... seems that there goes something wrong while calulating... But for what.. Text size should stay as is...
Also I get some strange image resizing errors... If I resize an image I get some kind of grid in it where are only transparent pixels... (changing transformation method to smooth solved the problem for now) What is wrong with PS ... Kind of strange things also happen in ID and Acrobat...?
Ok I thought it could be a float problem with my multicore so I opened the taskmanager and set Photoshop to only use CPU 2, 3 and 4... And everything seems to be ok...
Always setting the CPU cores in the taskmanager wouldn't be the best i can imagine.
I use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
In Print Settings in Printer Setup in the print module of CS6 stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedI am trying to create an action that would open a muli-page PDF file, select all the pages and place each page on its own layer, in the same Photoshop document.
Right now, it makes a new document in Photoshop of each page? Is there anyway to do this? With or without making an action?
I brought acer t232hl bmidz for Photoshop CC, so I can use my finger on canvas.. Find out that I cannot paint on canvas at all... Weird that adobe in design and illustrate working fine with multi touchscreen.. I am use window 8.
Is there any plug in or bug fixed for this problem?
What is the term for a multicolor fringe around an edge..how do you get rid of it
View 2 Replies View RelatedI have an image that uses about 20 different colors (there are 2 colors that dominate the image). I want to reduce the image to just those 2 main colors. How can I do that in Photoshop CS2 or Illustrator CS2?
View 1 Replies View Relatedhow to configure more than one monitor on my system for use with photoshop? I am presently working on a laptop and would like to add a large widescreen to view pixel information (keeping palettes on my laptop display).
View 4 Replies View Relatedhow to make multi colored backgrounds?
View 7 Replies View RelatedI add one ore two duplicate layers to the background layer. Then I add multiple adjustment layers (e.g., Hue/Sat; Brightness, Cotrast,etc.). Then I want to use the Clone Stamp to take something off of the background. The only way I am able to remove an item with the clone stamp is to remove it from the background and the duplicate layers ONE LAYER AT A TIME. Of course, I could always remove the object before I make the dups, but is there anyway to do this by going to any ONE layer and removing the object (using the Clone Stamp or any other tool)?
View 2 Replies View RelatedI have created 8 A4-sized PSD documents in Photoshop CS3 and I would like to create a single PDF document with 8 pages.
View 10 Replies View Related