Photoshop :: Matching Colors Of Stitched Image
Jul 22, 2007
I have three photos I'm stitching together, a somewhat panoramic end image.
I have done many of these before, with various techniques, however, I'm wondering what techniques any of you would use to make sure the seam between the photos blends perfectly in regards to color.
You can see below that the blue of the sky is slightly off, producing a visible seam. I can tweak the levels to get it looking better, but then other parts of the image get tweaked the wrong way, as in, if I fix the color in the sky, the color of the rocks below go way off.
Am I just better off merging the layers, and using the heal, dodge, burn tools to paint it together, as I have done before?
Should I use selections in specific areas to fix the color?
View 9 Replies
ADVERTISEMENT
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Jan 30, 2003
I`ve found a background color for my web page and I like to get the same color in Photoshop to use it like background for my grafics.Hom can I get the exactly same colors when on my page it`s in HEX triplet numbers and in photoshop it`s in RGB & CMYK?
View 3 Replies
View Related
Feb 3, 2006
how would you recommend I go about matching the bumper with everything else?
View 1 Replies
View Related
Jul 5, 2004
i'm into photoshopping cars and i've got a rough idea on how to stitch bits and pieces of other cars together nicely, the problem is i still haven't a clue on how to match the colours of different cars to my target car (i.e. my car is blue but the bumper of another car is green, so how do i get that green to match my car's blue?)
i just really want to know how to get this done cause previously i was using the luminance thinggy and found it to work for SOME colours but it didn't look good.
View 5 Replies
View Related
Nov 6, 2006
I have a layer with a picture that has some white in it,
A second layer that's half on top of the first layer and the other half does not have anything in the back. This layer also has 80% opacity and the color is just what I want.
How can I match the color from the second half to the one that has a white background?
View 9 Replies
View Related
Nov 4, 2006
In the picture is a screen capture, where you can see a file which is opened in both Photoshop CS2 and the Windows Image Viewer. The colors appear very different (it's the same file). In any other viewer (web browsers, for example) it appears as it does in the Windows Viewer.
View 7 Replies
View Related
Jan 1, 2014
I'm trying to match the background color in Xara Photo Designer to the background color in a Filemaker Pro layout. When I bring up the color picker in Filemaker, I get a generic Windows screen with colors expressed in raw numbers, not percentages, but Photo Designer appears to use only percentages, no matter which color model I use. How do I convert Windows integers to Xara percentages?
View 5 Replies
View Related
Aug 22, 2013
I want to paint an object with beige wich in the RAL color chart is RAL 1001, how to match the right color with xara since colors are not by name ? Can we search colors by name in xara photo & graphic designer 7 or later versions? what about if i need a pantone color for example ?
View 9 Replies
View Related
Sep 30, 2007
I have an image I have created on 3D studio max, I have 2 versions of this amge and one is under exposed. How can I match exactly the under exposed image to the correct image?
View 3 Replies
View Related
Oct 30, 2011
I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
View 6 Replies
View Related
Dec 16, 2010
the title says it all, how do you realisticly recreate a embroided patch effect. think of militairy patches.
this pictures shows what i mean [URL]
i have been fiddling around with the scribble effect. but i cant get the lighting to look right.
View 18 Replies
View Related
Feb 27, 2009
I am getting a hold on using various meathods to paste a selected object (a person) into another image....
but the issue i have is matching the color tonality (i hope i am using the correct word) of the pasted person matching the image i pasted into!! ...
I have tried, the hue and saturation and curves, dodge and burn, brighness and contrast, and a couple of others on the selected person/object it still looks unnatural ..
View 1 Replies
View Related
Nov 25, 2011
I have a still image of a view looking up at a complicated building (no ground in shot). There are lots of square features so I know where the right angles are but I have absolutely no information on any distances/dimensions at all and no info on the camera (focal length etc…).
I can get close by eyeballing it in 3D Max, tweaking cam position and focal length and proxy geometry but I’m sure there is a way to do this more automatically in Matchmover (which now ships with Max).
In Matchmover 2011 I created 4 track points on my image in 2D mode, 1 on a vertical corner as the origin, 1 directly above as Z, and 2 either side of the origin using the mortar lines to keep them level (all are as far away from each other as possible to increase track accuracy). I then make a new coordinate system and snap the origin, then Z and finally the X,Y nodes to the corresponding track points.
The last node I snap whichever one it happens to be, wont snap like the others. It just pings back.When I “solve for camera” it complains that it needs at least 2 images with 7 points in common or 4 points with known 3D coordinates.
There is visible lens distortion and I think this needs correcting somehow, other than the distortion parameter for the camera but this feels like stabbing in the dark as I have no way to know what distortion to apply.
View 2 Replies
View Related
Nov 11, 2012
I'm using CAD 2009. I've inserted a Bitmap image (a company logo) and I want to insert text with the same colour as the logo.
Can I sample the colour in the logo and apply it to the text? NB - I really don't want to go through all the colour options in CAD to find the nearest match.
I want to do something like the Microsoft Paint 'Pick Color' option.
View 3 Replies
View Related
Sep 4, 2012
I cut out the sky in the top layer of the timeline and the sky still beneath it is showing through. I need to color match the two shots. How can I see both shots in the CC effect so I can match the two?
View 5 Replies
View Related
Jul 1, 2013
I am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
View 1 Replies
View Related
Sep 7, 2011
Any plugin or something that gathers all the colors within a given image and allows you to save the pallete in another image...If you seen a sprite sheet thats pretty much what Im asking for.It'd be cool if the colors were sorted by how dark it was and by RGB.
View 2 Replies
View Related
Dec 4, 2008
I have real life picture that I will be editing to make into a t-shirt design. I am only allowed to have 8 unique colors. Is there a quick/easy way to do this? Or down I need to start from scratch and make my own cartoon similar to the picture?
View 1 Replies
View Related
Jun 1, 2008
Is there any way to get the colors from an image in photoshop? Ideally, I would like a simple process to get a swatch collection from an existing image.
View 2 Replies
View Related
Mar 7, 2006
There is a noticeable difference in color (and gamma?) in my work images when I view them within Photoshop versus when I view them outside of Photoshop, say, with my Windows Picture and Fax Viewer.
When I attempt a 'Save for Web' the images look differently, too. What can I (what should I?) do to make my images look the same within Photoshop as when I view them from without. This info would save me a lot of wasted time previewing outside of Photoshop to adjust and make corrections within Photoshop. I know there are some color (gamma) adjustments that I haven't set yet.
View 2 Replies
View Related
Jun 26, 2009
I'm designing some tshirts and I need to make the image I'm working on COMPLETELY black and white with absolutely no grey, but I can't seem to work out how to do it.
View 3 Replies
View Related
Dec 17, 2012
How can improve the colors and contours of the image?
View 3 Replies
View Related
Nov 12, 2012
Why have colors in my merged image changed? I am running Photoshop CS4 on Windows 7 and I'm viewing 3-channel RGB images. Something has changed and the blue channel doesn't appear in the image and the green channel is now blue. Everything looks perfect according to the thumbnails in the channel window. But when I looked at the merged image in the central view, again, blue is gone and green is now blue.
View 1 Replies
View Related
Apr 13, 2012
So here's what I've got. I've got a scanned image of the unit patch...the problem is the image shows the thread lines, which equate to different colors. I need to normalize the colors across the entire image...i.e the helicopter should be solid black and the background solid red etc.
Not much of a Photoshop guy but I'm learning OJT it seems. I have both Photoshop CS5 and Illustrator so whichever works best I'm game to use. I've attached the image in question.
View 7 Replies
View Related
Jun 1, 2013
I've been having trouble with this render I've created, in that I'm trying to change the colors on this character's hand from the orange tint that some of his fingers have due to firearm discharge, to a more neutralized color that matches another part of his hand, particularly his lower pinky finger. The reason why is I've changed the original color of the gun he's holding to something darker, and I want his hands to reflect the change in color as well.
I've tried everything from painting over the fingers, clone stamping, adjusting the curves, the shadows, the tones, the highlights, and even adjusting the hue and saturation, yet I'm still not getting the results I desire.
Attached are pictures illustrating what I mean, with circles around the problem areas, and a PSD of what I've tried to accomplish so far.
[URL]........
And again, to clarify, I want to change the colors of the subjects fingers that have an orange glow to them to a more neutral tone and to have them have the same color as the subject's pinky finger, which is also circled in blue.
View 5 Replies
View Related
Jan 8, 2004
I knew how to do it, but I forgot! Really did.
What I want to achieve is have a swatch of the colours/hues of an image. Of course, the number will be limited, but is offers a great starting point to use for painting etc.
I remember that .aco files had something to do with it, but even Help can't teach me.
Any ideas are more than welcome!
I rememebr from my Photopaint days that in that app it was only one click on a button, but that in PS it was more complicated.
View 9 Replies
View Related
May 19, 2008
I have a question about selecting sections of an image to copy or edit, and the best/easiest way to do it. I've been using the Pen to draw a line around the edge of the section(s) I want to edit, than tidy up the lines, convert it to a selection, and go from there. But this can often take a very long time.
if there was a better, faster and/or easier way to do this, or if using the Pen tool is probably the best way?
I'll use
this image
as an example (for lack of a better example image). Perhaps I want to take the dark blue area of the skirt, chest and feet and edit them to a different color (maybe I want to turn them red, for instance). Obviously the image has shading so not all of the colors are exactly the same, so the Magic Wand wouldn't help much.
To edit these sections, would using the Pen tool to drag a line around the edges and convert it to a selection be the best way, or is there another better way to do this?
It may be a stupid question, but I just thought I'd ask just in case there was a simpler way for me to go about editing my images.
And if it makes any difference, I have Photoshop CS2.
View 4 Replies
View Related
Apr 29, 2009
I am currently unable to access the color table in the mode image section. It is blank so that I cannot select it...any pointers? Also, I am having a hard time changing the colors on my jpeg image and changing the white part of the image transparent.
View 4 Replies
View Related
Sep 5, 2006
I've been having this problem for some time now. I edit my images and save them but the saved copies in their folders are always 1) darker and 2) with less color. However, when I put the images back into photoshop, they look as they did just before I saved them. Does anyone have any ideas on how to fix this or what might be causing it?
Also, when I do a lot of editing in one go, I get a message that I'm running out of memory on my C drive, even though photoshop is installed on my much larger D drive.
View 1 Replies
View Related
Apr 17, 2007
I can bing up the color picker right? then hover over the brush or what ever you call that over the old image on a certain color to try to get its hex value.. Now how would I do this on Illustrator?
View 2 Replies
View Related
