I have an image I have created on 3D studio max, I have 2 versions of this amge and one is under exposed. How can I match exactly the under exposed image to the correct image?
View 3 RepliesI have an image that I rendered in 3ds Max 2013 using iRay. There is a visible horizon line present in the image that I am trying to edit out. However, adjusting the levels, curve or exposure does absolutely nothing to the part of the image I am trying to edit. They do however work on the parts im not trying to edit. I'm sure this explains very little, so here is a lower res version showing whats up.
Try to edit the levels on the TV layer; the matte shadows and horizon line stay the same, while the TV adjusts as expected.[URL]...
I have three photos I'm stitching together, a somewhat panoramic end image.
I have done many of these before, with various techniques, however, I'm wondering what techniques any of you would use to make sure the seam between the photos blends perfectly in regards to color.
You can see below that the blue of the sky is slightly off, producing a visible seam. I can tweak the levels to get it looking better, but then other parts of the image get tweaked the wrong way, as in, if I fix the color in the sky, the color of the rocks below go way off.
Am I just better off merging the layers, and using the heal, dodge, burn tools to paint it together, as I have done before?
Should I use selections in specific areas to fix the color?
I am getting a hold on using various meathods to paste a selected object (a person) into another image....
but the issue i have is matching the color tonality (i hope i am using the correct word) of the pasted person matching the image i pasted into!! ...
I have tried, the hue and saturation and curves, dodge and burn, brighness and contrast, and a couple of others on the selected person/object it still looks unnatural ..
I have a still image of a view looking up at a complicated building (no ground in shot). There are lots of square features so I know where the right angles are but I have absolutely no information on any distances/dimensions at all and no info on the camera (focal length etc…).
I can get close by eyeballing it in 3D Max, tweaking cam position and focal length and proxy geometry but I’m sure there is a way to do this more automatically in Matchmover (which now ships with Max).
In Matchmover 2011 I created 4 track points on my image in 2D mode, 1 on a vertical corner as the origin, 1 directly above as Z, and 2 either side of the origin using the mortar lines to keep them level (all are as far away from each other as possible to increase track accuracy). I then make a new coordinate system and snap the origin, then Z and finally the X,Y nodes to the corresponding track points.
The last node I snap whichever one it happens to be, wont snap like the others. It just pings back.When I “solve for camera” it complains that it needs at least 2 images with 7 points in common or 4 points with known 3D coordinates.
There is visible lens distortion and I think this needs correcting somehow, other than the distortion parameter for the camera but this feels like stabbing in the dark as I have no way to know what distortion to apply.
I'm using CAD 2009. I've inserted a Bitmap image (a company logo) and I want to insert text with the same colour as the logo.
Can I sample the colour in the logo and apply it to the text? NB - I really don't want to go through all the colour options in CAD to find the nearest match.
I want to do something like the Microsoft Paint 'Pick Color' option.
I cut out the sky in the top layer of the timeline and the sky still beneath it is showing through. I need to color match the two shots. How can I see both shots in the CC effect so I can match the two?
View 5 Replies View RelatedI am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
Does exposure slider exactly simulate the photographic exposure?
View 3 Replies View RelatedI am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedI photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies View RelatedI'm putting together a series of images, and I want the horizon line to be a constant from image to image, though they were not that way in the original files. I'm assuming that I should go with the picture that has the smallest distance from the bottom of the picture and then crop the others so the distance appears to be the same in them as well. But is there a way to make that a simple process?
View 1 Replies View RelatedWas really wanting to get the first image at the end of a spotlight inserted in the second image of the city off in the distance. Kind of like how the batman symbol is in the spotlight. The symbol is my churches logo and was wanting to use it for our Instagram.
Attachment 36457
Attachment 36458
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View Relatedhow do I stop an image aligning itself to the edges of the image area.
View 2 Replies View Relatedi used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedThis Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies View RelatedIn Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies View Related