I like to work in fullscreen mode (press F once). I like it that I can pan the position of the image around (holding the space bar), but it is very annoying that when I cycle through the opened images using cmd-< the default position of the image is used again... very annoying, so I have to re-position the image again and again...
View 3 RepliesI created a jigsaw puzzle from an image. All the pieces exist in different layer.
Is there a way to get the position of the pieces (a script or a menu command)? I realize I could use the ruler, however, I would like something that would be more exact and less tedious.
I just clean-installed PS CS6, previously coming from heavy PS CS4 experience. I extensively use tab to go to full screen for optimal viewing conditions, and I also used alt+key combinations to access the menus via keyboard and edit while in full screen. CS6 no longer allows me to do this. Is this a new limitation of CS6? Is there a way to make ALT+key menu access work again? since the tab fullscreen view is something I use very very often for undistracted analysis of my work.
View 1 Replies View RelatedMaybe I am just missing something but I am only able to record when I play any game when it is in a windowed mode, no matter the size, but does not record any game that is in a full screen mode. No matter if I select a specific part of the screen it or default full screen to record it will just record the background not the game. Also if I try to force the screen capture to the game specific it will try to switch to it then back to the screen capture menu with nothing recorded or changed.
I am using VideoStudio x5 pro version 15.1.0.34
Win8 64-bit
i7-3770k @3.5
ASUS sabertooth z77 mobo
8GB DDR3
Radeon HD 6970
I've an Intel i7 with 4 cores, 3.6 GHz and enabled Hyperthreading. Also I've 24 GB RAM. My monitor has a resultion of 2560x1400 pixel. I configured in Lightroom 5 to have a standard preview size of 2880 pixel. During the import I let Lightroom generate all preview in standard size.
So some days later I wanted to review my picture in full screen mode. At first I saw just a blur picture, after 2-3 seconds it was a little bit sharper and after additional 2 seconds it was sharp. So I've to wait 4-5 seconds per picture, before I can see a sharp image.
I have just bought Elements 12. Great programme. I used to use Picasa 3, a good free programme. In Picasa it is easy to move images around in their folders by simply click, drag and drop. This does not work in elements. Is it possible to achieve this somehow?
View 1 Replies View RelatedI want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
I have a question with batch crop. I have about 300 images of same dimension and would like crop to specific position in all of them. In photoshop, I would import all the images as a layer and crop a layer, then export the layer as an individual file.
View 1 Replies View RelatedI'm drawing a blank here...anyway, I just got a new laptop (mac), and am loving it. I've gone and put XDP6 into fullscreen mode (by mistake) and can't figure out how to get out of it.
Of course I don't have a keypad, and I've not figured out how to customize the shortcut away from numpad 8.
The Palette Editor won't stay on top when GIMP is in Fullscreen mode,yet does when GIMP is not in Fullscreen mode.
View 1 Replies View RelatedI have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
how to remove the remembered zoom location from an image like it is when you first import it into LR?
I would need a function to sort images based on GPS position, north to south or vest to east. Is that possible or an function that will come in the future.
View 1 Replies View RelatedBefore Photoshop Elements 10, when setting up to print, I was able to uncheck "center" and then I could drag the image anywhere I wanted on the printing surface. Now, there is a blue box that doesn't move and the image is cut off by the bounderies if you drag it away from center. I want to be able to drag the image anywhere I want on the paper and then print, like I used to be able to. How do I do that?
View 2 Replies View RelatedI know the shortcut for cycling through a preview of blend modes is to use the Shift keys and the + or - sign. What must I do to consistently get this shortcut to work. Am using CS5.
View 6 Replies View RelatedOn one of my PCs the hot key for tools will take me to that group of hot keys. However, repeated hits on the same hot key does not cycle through the subset of the tool group.
View 4 Replies View Relatedhow to keep the layer in the same position as in the original image when moving it to a new image..
View 1 Replies View RelatedI just bought the Intuos5 tablet and am now setting it up to work properly. It apparently has some issues with non-US keyboards and requires some shortcut remapping. Which wouldn't be a problem (I got brush size working), if only I could find the place where the layer cycling shortcuts are hidden.
I see this might be a rather dumb question, but I went through the Edit->Keyboard Shortcut menus multiple times and just couldn't find what I was looking for. is it possible to make Canvas Rotation seamless and not only by 90 degrees in CS2?
I understand that shift++ (holding down the shift key and typing plus key) is supposed to cycle between blending modes. Nothing happens when I do that though. I have the top layer selected and the blending mode stays the same. Using PS CS6.
View 1 Replies View RelatedI've noticed that with selection cycling, while it's handy to select multiple overlapping objects, you'd better be sure about what you're selecting first because there's no way to unselect (using selection cycling).
View 4 Replies View RelatedHaving problem with object selection when covered by other objects ie lines,arcs etc on a solid model---autocad 2011---did not seem to be a problem in 2006 version,but wondering if switching layers on and off is the only way?
View 9 Replies View RelatedI know in Photoshop you are able to cycle through hidden tools not visible in toolbar by pressing SHIFT together with the keyboard shortcut repeatedly. I don't see this behaviour in Illustrator - is this correct? Is there any way to replicate this behaviour without allocating a different shortcut for every tool in the toolbox?
View 4 Replies View RelatedIs it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
I have a high res image of a map and I want to add it to a project and ZOOM in to a particular spot on that image.
I also want the image to stay unzoomed for a short time, then zoom in and then remain zoomed in for a short time.
I have added two 'key frames' (using add key frame) and have applied the zoom between them.
My problem is how to make sure the image doesn't move between the start and the first key frame (and between the second key frame and the end). I know that I can drag the RED CROSS using my mouse but I am finding it almost impossible to end up with the image without at least one black stripe on one edge (ie image not centered).
The result is that the resulting video clip moves slightly on the screen between the start and key frame 1 (and also between the zoomed in image at the second key frame and the end of the clip).
Is there a method like 'snap to grid) to force the image to the same place as the previous key frame?
Situation Basically I have a series of 8-bit bitmap images which all use different palettes but have around 64 colors in common.
This will allow them to be combined with another graphic which uses only those 64 colors in a 3D engine, thereby allowing that graphic to be used with the images with no color misassignments.
I need to be able to set those 64 colors to the same position in the colormap for each image. I could just limit the images to 192 colors, but the loss of information is unacceptable to me.
The task I'd like to manually drag those specific colors to the bottom of the colormap in a set order, but the "Rearrange Colormap" dialogue does not show me what their RGB values are, so there is too much room for error. (Tried in Gimp-2.6 and 2.8)
I'm creating a sprite sheet and I need to move my sprites to a specific location.
For example my sprite is 120x120, so I need to place the 5th animated frame at EXACTLY 120x5=600 pixels from zero or at 600, 0. I can't seem to find a way of doing this in GIMP, it shows me a mouse delta position from where I first clicked?
I often have lines drawn on top of other lines and need to cycle thru them to select the correct one. I always did this before upgrading to 2013 by holding the CTRL key and clicking on the lines. That doesn't seem to work on this version. I saw some recomenedations to hold the CTRL key and space bar at the same time but that still doesn't seem to work.It would be a huge time waste if I have to turn off layers everytime to just get to 1 line that I need to offset.
View 2 Replies View RelatedSelection Cycling: This feature is completely annoying!
I keep turning it off, and after a while, in the middle of a command, it turns it self on.
Is it a bug in the 2011 version?
How to turn it off for good?
When using selection cycling (which I think is brilliant, shame we didn't have it 15 years ago) with an xref attached the application slows right down to the point where moving the mouse results in the cross hairs jumping around and making using anything almost impossible. Turning the xref off or turning selection cycling off restores performance to how it should be. If both are on I just cannot use the program at all, shame really as this new feature is neat. I use x'refs extensively so this fault restricts use of the new feature.
I am running a Quad core 6600 intel processor
4gb Ram
Nvidia Quadro NVS 290
32 bit Windows Vista Business
I have a problem fo cycling dependency when I try to do a notch in a particular case.
I have this frame sample. I need to notch each frame parts. I realize 3 notchs, first one between 1 and 2, second one between 3 and 4. This two notch are realized without any problem.
When I try to do the last notch between 5 and 6 I have a cycling dependency error message. I don't understand why and how to solve the problem.
In AI CS5 the size and position of an image were displayed in the top toolbar when you selected the image. This is missing in AI CS6, how can I get it back?
View 2 Replies View RelatedI just upgraded to Autocad 2014.
With regards to selection cycling, when it's turned on, the dialog box pops up in the middle of my screen which is exactly where I DON'T want it as that's usually where I'm working and it causes all kinds of selection issues. Regardless of the settings I choose in the options, it comes up in the middle of my screen.
I've tried setting the position to static and then dragging the box to the side but on the next click, it pops up in the original centered location. I've also tried every possible configuration in the options box to stop this behavior.