VideoStudio :: How To Lock Image Position During Zoom
Dec 18, 2011
I have a high res image of a map and I want to add it to a project and ZOOM in to a particular spot on that image.
I also want the image to stay unzoomed for a short time, then zoom in and then remain zoomed in for a short time.
I have added two 'key frames' (using add key frame) and have applied the zoom between them.
My problem is how to make sure the image doesn't move between the start and the first key frame (and between the second key frame and the end). I know that I can drag the RED CROSS using my mouse but I am finding it almost impossible to end up with the image without at least one black stripe on one edge (ie image not centered).
The result is that the resulting video clip moves slightly on the screen between the start and key frame 1 (and also between the zoomed in image at the second key frame and the end of the clip).
Is there a method like 'snap to grid) to force the image to the same place as the previous key frame?
View 5 Replies
ADVERTISEMENT
Jan 8, 2013
What i want to do is apply an overlay on a map which has white lines crossed in the middle to pinpoint a location, i want them to move into location, not be static
I managed what i wanted using a JPG image, white lines, black background, and use the chromakey to remove the black, but that left the lines blurry and not as defined
I saved an image as a PNG with white lines on transparent background, which works great for keeping it all looking crisp and clear, but when i click to do a Pan & Zoom on the image under the Edit / Attribute tabs on the image, the Pan & Zoom cannot be chosen and isnt highlighted
Can it be done on a PNG image or just JPG?
View 1 Replies
View Related
May 13, 2013
What happened to the lock pan and zoom on the view port background menu? Why would they take that out?
View 3 Replies
View Related
Oct 26, 2013
I'm looking up what to do on digital tutors. It shows how to add blueprints to the viewport background and have it locked in via bitmap so that you don't need to use planes. I was doing fine following the instructons until it showed a button to lock the zoom/pan into place so that the image won't remain a constant size even if you zoom in and out. I can't find it on my '14 version, and where it is placed so that I can finish setting up my blueprints.
View 2 Replies
View Related
Jul 26, 2011
Why I can't get the attribute to stretch with right hand arrow.
View 2 Replies
View Related
Oct 24, 2011
what is the lock position dxf, when entmaking a block with attributes ?
View 1 Replies
View Related
Jun 21, 2012
I am having a problem with the perpendicular function when I draw a line. It won't lock at a single point, instead it moves along an axis.
For example, when I want to draw a line in Y direction it moves in the X axis, and opposite if I draw in the X direction.
How can I make the perpendicular function lock to one position?
View 1 Replies
View Related
May 16, 2011
I am using both Paint Shop Pro X3 & Video Studio X3. I'm putting together a slideshow and when I use Pan & Zoom to zoom on a particular subject (as a bee on a flower) after so much zoom the picture blurs. I have a very good camera and the photo remains sharp in Paint Shop Pro in extreme zoom. Is there a way to sharpen the image while zooming in Video Studio?
View 4 Replies
View Related
Jan 29, 2014
I would like to lock the size of an object regardless of the zoom percentage. When I am zooming in on a vector map (main layer) the objects (on different layers) becomes very big. So I should be able to zoom in/out on the vector map, but the objects shall keep the same size. How can I do this?
View 5 Replies
View Related
Sep 27, 2010
I have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
how to remove the remembered zoom location from an image like it is when you first import it into LR?
View 5 Replies
View Related
Mar 9, 2011
Is there a way to leave the Options Panel opened as its default position? Right now I have to click each time on the blue botton to open the Options panel at each clip that I decide to edit (it closes automatically each time) on VSX3
View 11 Replies
View Related
Aug 27, 2012
How to lock an picture (png, for example) to a moving object in Corel VideoStudio X5? maybe i might use some plugins? i know that in some video editing software this option exist and simply to use. is it real in videostudio x5?
View 2 Replies
View Related
Jan 19, 2011
I see that I have to enable Ripple Editing to lock my titles with the video track before adding more scenes, but I can't seem to find where to do this.
View 2 Replies
View Related
Aug 7, 2013
How does one position a clip along the timeline where it needs to be? I'm either doing something wrong or there is a bug in the software
dragging a video clip(any format) from the library to the video track results in the clip being placed at the beginning. I cannot be drag/re-position it along the timeline. Also, the clip can be shortened using the handles on either end, but cannot be expanded back to its original size in the timeline. for now, I'm using the trim markers to do so. I contacted tech support & received a head-scratching out-of-context reply. Either they're not understanding me or don't care.
View 2 Replies
View Related
Jul 5, 2012
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
View 4 Replies
View Related
Sep 8, 2011
When I am in the sound mixer and select for instance the music track, and want to drag the note symbol down toward the surround speakers, I have to hold the note with the mouse all the way of the entire music clip, otherwise, the symbol note returns slowly back to the center.
Is there any way to keep the note symbol fixed in the desire position without holding the mouse all the time of the entire music clip? I am using VS4.
View 1 Replies
View Related
Mar 4, 2013
I have been using the nine chapter thumbnail DVD menu template. I saw that the start position for each thumbnail could be manually adjusted. So, taking some time, I adjusted each of the nine thumbnails to a suitable frame of the corresponding clip. It worked fine as long as I burned the DVD immediately afterwards. However, if I closed the menu dialogue, all clips reverted to frame 1.
Surely the positions should be saved as are all of the other edits one does to a menu. Not only was this frustrating, it means that one cannot go back and easily burn another DVD from the same project.
View 4 Replies
View Related
Feb 22, 2006
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies
View Related
Sep 16, 2012
I have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
View 12 Replies
View Related
Sep 17, 2011
As I load photos into the video track, some of them allow me to apply panning and zooming (either auto p&z or customized), and others don't allow it.
For about half my images, the auto p&z is grayed out, and on the Photo Options panel, the P&Z option is gray and the radio button can't be activated.
For both images that work and images that don't work, they are all .tif files of varying sizes. I can't see any logic in why some images allow P&Z and others don't. I'll drag and drop an image onto the video track, and if the P&Z is grayed out, I'll delete it, drag and drop another image, and boom, no problems.
P&Z is active.What's the problem?
View 5 Replies
View Related
Jul 18, 2011
Importing Nikon NEFs and 1920x1080p video from new D5100. Target video is 1920x1080p h.264. No matter what I do, I can't get the custom pan and zoom box to be widescreen aspect ratio, it is stuck in 4:3. I KNOW it can be done as I managed to do it once with the trial version, but wasn't sure how. Now I want to do it again.
View 3 Replies
View Related
Aug 29, 2011
I am using pro X4 on windows 7. For my current project I am doing a slide show with added titles and audio. I decided to try pan & zoom. So on the menu bar I selected edit and then selected auto pan & zoom. This applied pan & zoom to all the photos (over 100). As I have previewed the results, I find the pan & zoom effects for many of the photos is not appropriate meaning faces are being cut off etc. I know I can go in and customize the settings for pan & zoom and even copy the attributes to all the photos. At this point what I really want to do is turn off pan & Zoom. I select auto pan & zoom from the edit menu with no impact. I select a photo and open the option window. The radio button for pan & zoom indicates that it is active. I can't deselect the radio button. how to turn off pan & zoom. I would like to do it to all the photos in one step like I turned it on.
View 2 Replies
View Related
Oct 16, 2011
I am asking about zoom and pan on video. I used the crop filter to do a basic zoon and pan on a video but the level of control is quite primitive.
Any plugin that provides better control of zoom and pan? Something with a motion path for example. I discovered the use of the crop feature on youtube.
View 3 Replies
View Related
Apr 25, 2013
I'm used to a PC, but am having to use a mac once a week for a new job.
When I hit "Cmd -0" to view my image in its entirety, my background screen shrinks with it. Then, when I zoom in again, I have to expand the screen again.
I'd like to have my background to stay locked in the same position where I have placed it, with only my image file expanding or shrinking, as I work.
View 1 Replies
View Related
Jan 9, 2014
I have finished my photo editing but now it has a lock on the image. How do I end the Editor who seems busy all the time!
View 1 Replies
View Related
Nov 10, 2011
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
View 2 Replies
View Related
Aug 24, 2013
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies
View Related
Jul 26, 2012
I'm playing around with time lapses in VS5 and am having some success. One thing I can't work out though is how I go about adding Pan &/or Zoom to a sequence. I can add it to individual images but i'm not sure how to add the effect over a series of say 300 images so that it's a smooth motion?
View 14 Replies
View Related
Sep 27, 2012
I'm using X5.
I would like to create a certain zoom effect, but I can't get it done. I'm working with graffiti photo's. I want to show a wall with several different pieces on it. After a few seconds, a photo showing just one of those pieces appears in an overlay. It is placed at the same spot where its background-twin is located and its resized to match its appearance. That small overlay now has to grow in size so it eventually fits the entire screen. It is however important that, during this 'zoom effect', the background photo remains visible.
I have tried to work with the Picture-in-Picture effect from NewBlue, which sounded like the solution. I managed to get the entire thing done, except for making the background visible during the effect. The resized overlay picture is surrounded by a black screen that covers the background photo and I can't figure out how to make that black surface transparent. It ís possible to make the entire overlay transparent, but that also affects the black color in the photo, which obviously messes it up.
View 3 Replies
View Related
May 12, 2012
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
Application Timestamp:4ec5d8d8
Fault Module Name:libiomp5md.dll_unloaded
Fault Module Version:0.0.0.0
Fault Module Timestamp:4a811f19
Exception c0000005
Exception Offset:0e7119c8
OS Version:6.1.7601.2.1.0.768.3
Locale ID:3081
Additional Information 1:0a9e
Additional Information 2:0a9e372d3b4ad19135b953a78882e789
Additional Information 3:0a9e
Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
[URL]........
If the online privacy statement is not available, please read our privacy statement offline:
C:windowssystem32en-USerofflps.txt
View 1 Replies
View Related
Feb 7, 2012
The old photos were scanned in at 300 dpi. Many of them were then cleaned up (spots and scratches removed, etc.) using Microsoft Digital Image Pro 10 (which we also did on previous projects). My wife then began creating her project essentially using all of the VideoStudio defaults. She added a custom pan and zoom to every photo so that the slide show has some motion, and the person or object of interest in the photo gets enlarged and emphasized.
Problem 1: as some of the photos move, there is a visible twitch or judder--not sure what word I should use to describe it. It's like the picture jiggles a little as it moves. The problem is not in the burn, the DVD player or television, because you can see it happening when you watch the preview of the project in the software, edit mode. It seems to be random, I cannot discern a pattern to which photos, where on the timeline, which transition, etc., is related to the issue.
Problem 2: my wife created this project for a 4:3 aspect ratio TV, so the crop box that was used for all of the custom pan and zoom was 4:3. I would like to create a new version of the project, with all of the photos re-cropped, re-zoomed and re-panned using a 16:9 box. The problem is, I cannot figure out how to delete or un-do all of the existing 4:3 panning and zooming. I have tried opening the program with the 16:9 box checked, then opening the project file, then deleting photos from the time-line, and re-linking to a new copy of the same photo. When I open the pan and zoom box for the photo, it has a 4:3 aspect ratio crop box! Note that if I start a new project and drop the same photo on the timeline, I do get a 16:9 box for pan & zoom. So it seems that 4:3 is associated with the existing project, and I can't figure out how to get rid of it. I really don't want to have to re-create the whole thing from scratch. Is there a simple way to be able to re-do the pan & zoom at 16:9?
I tried selecting all of the photos on the timeline, right-clicking, then choosing auto pan and zoom, to see if that would re-do it using a 16:9 crop box (which could then be customized). No joy, it again used a 4:3 box.
View 14 Replies
View Related
