VideoStudio :: Filter Pan And Zoom
Sep 16, 2012
I have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
View 12 Replies
ADVERTISEMENT
Aug 13, 2011
When I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.
View 7 Replies
View Related
Mar 19, 2012
I have a screen splited to 4 and a shoot is played in each one. I would like to put a Filter of Effect that will take one of this pieces and zoom it in till it will fill the complete screen. Just today I noticed a similar video in the Corels site where the introduce the VS X5.
View 1 Replies
View Related
Aug 12, 2011
Searched three fora: this, General, and <I forget>. I looked for a Developer thread thinking this might already be a requested feature, but did not find one.
When I have a filter window open, most often there is a "preview" window--of fixed size--which I can pan, but not so far not figure out how to zoom to see detail.
I wish I may I wish I might:
- be able to resize the "preview" window
- be able to zoom in to see the effects of the filter better
View 1 Replies
View Related
Sep 18, 2013
I am using CS6 Extended and am taking a class on photoshop.
I am trying to apply the wave filter to some type, but not sure what all the options in the dialog box are for. I do see that there is something changing in the preview box, but the image is so incredibly tiny I can't really tell what is happening. I don't see any way to increase the size of the preview box.
View 2 Replies
View Related
Jan 8, 2013
What i want to do is apply an overlay on a map which has white lines crossed in the middle to pinpoint a location, i want them to move into location, not be static
I managed what i wanted using a JPG image, white lines, black background, and use the chromakey to remove the black, but that left the lines blurry and not as defined
I saved an image as a PNG with white lines on transparent background, which works great for keeping it all looking crisp and clear, but when i click to do a Pan & Zoom on the image under the Edit / Attribute tabs on the image, the Pan & Zoom cannot be chosen and isnt highlighted
Can it be done on a PNG image or just JPG?
View 1 Replies
View Related
Sep 17, 2011
As I load photos into the video track, some of them allow me to apply panning and zooming (either auto p&z or customized), and others don't allow it.
For about half my images, the auto p&z is grayed out, and on the Photo Options panel, the P&Z option is gray and the radio button can't be activated.
For both images that work and images that don't work, they are all .tif files of varying sizes. I can't see any logic in why some images allow P&Z and others don't. I'll drag and drop an image onto the video track, and if the P&Z is grayed out, I'll delete it, drag and drop another image, and boom, no problems.
P&Z is active.What's the problem?
View 5 Replies
View Related
Jul 18, 2011
Importing Nikon NEFs and 1920x1080p video from new D5100. Target video is 1920x1080p h.264. No matter what I do, I can't get the custom pan and zoom box to be widescreen aspect ratio, it is stuck in 4:3. I KNOW it can be done as I managed to do it once with the trial version, but wasn't sure how. Now I want to do it again.
View 3 Replies
View Related
Aug 29, 2011
I am using pro X4 on windows 7. For my current project I am doing a slide show with added titles and audio. I decided to try pan & zoom. So on the menu bar I selected edit and then selected auto pan & zoom. This applied pan & zoom to all the photos (over 100). As I have previewed the results, I find the pan & zoom effects for many of the photos is not appropriate meaning faces are being cut off etc. I know I can go in and customize the settings for pan & zoom and even copy the attributes to all the photos. At this point what I really want to do is turn off pan & Zoom. I select auto pan & zoom from the edit menu with no impact. I select a photo and open the option window. The radio button for pan & zoom indicates that it is active. I can't deselect the radio button. how to turn off pan & zoom. I would like to do it to all the photos in one step like I turned it on.
View 2 Replies
View Related
Oct 16, 2011
I am asking about zoom and pan on video. I used the crop filter to do a basic zoon and pan on a video but the level of control is quite primitive.
Any plugin that provides better control of zoom and pan? Something with a motion path for example. I discovered the use of the crop feature on youtube.
View 3 Replies
View Related
Nov 10, 2011
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
View 2 Replies
View Related
Aug 24, 2013
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies
View Related
Jul 26, 2012
I'm playing around with time lapses in VS5 and am having some success. One thing I can't work out though is how I go about adding Pan &/or Zoom to a sequence. I can add it to individual images but i'm not sure how to add the effect over a series of say 300 images so that it's a smooth motion?
View 14 Replies
View Related
Sep 27, 2012
I'm using X5.
I would like to create a certain zoom effect, but I can't get it done. I'm working with graffiti photo's. I want to show a wall with several different pieces on it. After a few seconds, a photo showing just one of those pieces appears in an overlay. It is placed at the same spot where its background-twin is located and its resized to match its appearance. That small overlay now has to grow in size so it eventually fits the entire screen. It is however important that, during this 'zoom effect', the background photo remains visible.
I have tried to work with the Picture-in-Picture effect from NewBlue, which sounded like the solution. I managed to get the entire thing done, except for making the background visible during the effect. The resized overlay picture is surrounded by a black screen that covers the background photo and I can't figure out how to make that black surface transparent. It ís possible to make the entire overlay transparent, but that also affects the black color in the photo, which obviously messes it up.
View 3 Replies
View Related
May 12, 2012
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
Application Timestamp:4ec5d8d8
Fault Module Name:libiomp5md.dll_unloaded
Fault Module Version:0.0.0.0
Fault Module Timestamp:4a811f19
Exception c0000005
Exception Offset:0e7119c8
OS Version:6.1.7601.2.1.0.768.3
Locale ID:3081
Additional Information 1:0a9e
Additional Information 2:0a9e372d3b4ad19135b953a78882e789
Additional Information 3:0a9e
Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
[URL]........
If the online privacy statement is not available, please read our privacy statement offline:
C:windowssystem32en-USerofflps.txt
View 1 Replies
View Related
Feb 7, 2012
The old photos were scanned in at 300 dpi. Many of them were then cleaned up (spots and scratches removed, etc.) using Microsoft Digital Image Pro 10 (which we also did on previous projects). My wife then began creating her project essentially using all of the VideoStudio defaults. She added a custom pan and zoom to every photo so that the slide show has some motion, and the person or object of interest in the photo gets enlarged and emphasized.
Problem 1: as some of the photos move, there is a visible twitch or judder--not sure what word I should use to describe it. It's like the picture jiggles a little as it moves. The problem is not in the burn, the DVD player or television, because you can see it happening when you watch the preview of the project in the software, edit mode. It seems to be random, I cannot discern a pattern to which photos, where on the timeline, which transition, etc., is related to the issue.
Problem 2: my wife created this project for a 4:3 aspect ratio TV, so the crop box that was used for all of the custom pan and zoom was 4:3. I would like to create a new version of the project, with all of the photos re-cropped, re-zoomed and re-panned using a 16:9 box. The problem is, I cannot figure out how to delete or un-do all of the existing 4:3 panning and zooming. I have tried opening the program with the 16:9 box checked, then opening the project file, then deleting photos from the time-line, and re-linking to a new copy of the same photo. When I open the pan and zoom box for the photo, it has a 4:3 aspect ratio crop box! Note that if I start a new project and drop the same photo on the timeline, I do get a 16:9 box for pan & zoom. So it seems that 4:3 is associated with the existing project, and I can't figure out how to get rid of it. I really don't want to have to re-create the whole thing from scratch. Is there a simple way to be able to re-do the pan & zoom at 16:9?
I tried selecting all of the photos on the timeline, right-clicking, then choosing auto pan and zoom, to see if that would re-do it using a 16:9 crop box (which could then be customized). No joy, it again used a 4:3 box.
View 14 Replies
View Related
Feb 9, 2012
I know that ProX4 does not provide panning and zooming of video, but any way to do this using the overlay tracks?
View 1 Replies
View Related
May 7, 2011
Is it possible to change the default black background color in customize pan and zoom?
View 6 Replies
View Related
Dec 27, 2012
I'm currently creating slide show with about 1,000 photos. BTW, I need to apply automate pan and zoom feature on all 1,000 photos. Is there any method to apply this at one time instead of manually every single photo?
View 2 Replies
View Related
Jan 9, 2012
I am on X4 and go back years with the program. I thought there was a feature to select only a part of the screen and be able to zoom on that on playback in the project. was this in an earlier version? I cannot find this feature in X4. I know I can do this for an image but want to do it for close ups in videos.
View 4 Replies
View Related
Dec 18, 2011
I have a high res image of a map and I want to add it to a project and ZOOM in to a particular spot on that image.
I also want the image to stay unzoomed for a short time, then zoom in and then remain zoomed in for a short time.
I have added two 'key frames' (using add key frame) and have applied the zoom between them.
My problem is how to make sure the image doesn't move between the start and the first key frame (and between the second key frame and the end). I know that I can drag the RED CROSS using my mouse but I am finding it almost impossible to end up with the image without at least one black stripe on one edge (ie image not centered).
The result is that the resulting video clip moves slightly on the screen between the start and key frame 1 (and also between the zoomed in image at the second key frame and the end of the clip).
Is there a method like 'snap to grid) to force the image to the same place as the previous key frame?
View 5 Replies
View Related
May 16, 2011
I am using both Paint Shop Pro X3 & Video Studio X3. I'm putting together a slideshow and when I use Pan & Zoom to zoom on a particular subject (as a bee on a flower) after so much zoom the picture blurs. I have a very good camera and the photo remains sharp in Paint Shop Pro in extreme zoom. Is there a way to sharpen the image while zooming in Video Studio?
View 4 Replies
View Related
Apr 24, 2012
How do I get a Freeze frame at the begining and end of a Pan & Zoom Optical?
View 3 Replies
View Related
Apr 4, 2012
I am building a highlight video for my son who is a wrestler. I had the idea at the beginning to zoom in on one of his sr pics towards his eye. I want a the video to start in his eye but as zooming is complete it will end up full page video.
View 12 Replies
View Related
Sep 30, 2013
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
View 1 Replies
View Related
Aug 20, 2013
I'm a user of Corel x6 at the moment and it works perfectly. I wonder if there's a sort of VHS filter/mask available to be used with Corel x6 so the digital copy looks a bit 'damaged' and as if it was recorded in the 1980s.
View 3 Replies
View Related
Nov 6, 2011
Filter does not shift in the UVS Pro X4. When applied to the chest and later attempt to modify or even delete it the program shuts down. . Win7 x64 System
View 2 Replies
View Related
Oct 29, 2010
when I split the sound off the video I can not apply the audio filter to the sound clip
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): MTS
What devices are involved and their mode of connection?: NA
Project Properties (important): NA
Output format (file, DVD, VCD, SVCD): NA
Output Properties (cogwheel in lower left of burn screen): NA
PAL or NTSC: NA
Error Codes (if any): NONE
Product Version: VS X3 Pro
View 4 Replies
View Related
Aug 25, 2011
I have a nephew that send me a bunch of video's from his camera, they are 90 degrees to the left.Is the easiest way or only way to do it is the use the rotate filter?
View 7 Replies
View Related
Mar 4, 2011
I have some old 8mm family films which decades ago (back in 1980) were converted to VHS.The 8mm reels are long gone now, they got moldy, brittle and turned to dust, so I binned them around 1992.About 6 years ago, we converted the VHS tapes to DVD - direct copy from VHS deck to DVD recorder - so the family could enjoy the tapes again, because they were getting too old. We binned the VHS tapes about 3 years ago.
So here is my conundrum:Considering I have no longer access to the original 8mm reels, and the VHS tapes are long gone as well, during the process of copying across from VHS to DVD the 'interlace' has remained and become digitally burned into the VOB files... is this correct in my thinking?
The reason I say this is because now that I'm trying to bring these old films back to life (which were VERY dark) I can start to see the interlaced lines start to show up as I lighten them in X3.So my curious mind is now wondering:
-Is there a way I can remove those lines?
-Where is the 'de-interlace filter' in X3?
View 9 Replies
View Related
Apr 14, 2013
I've been using VS 5 for awhile. The sharpness filter, when you put it on a clip, goes from soft to hard as the clip progresses.
How do I set it so that the clip stays sharp- start to finish ?
View 2 Replies
View Related
