GIMP :: Zoom In On Preview In Any Filter
Aug 12, 2011
Searched three fora: this, General, and <I forget>. I looked for a Developer thread thinking this might already be a requested feature, but did not find one.
When I have a filter window open, most often there is a "preview" window--of fixed size--which I can pan, but not so far not figure out how to zoom to see detail.
I wish I may I wish I might:
- be able to resize the "preview" window
- be able to zoom in to see the effects of the filter better
View 1 Replies
ADVERTISEMENT
Sep 18, 2013
I am using CS6 Extended and am taking a class on photoshop.
I am trying to apply the wave filter to some type, but not sure what all the options in the dialog box are for. I do see that there is something changing in the preview box, but the image is so incredibly tiny I can't really tell what is happening. I don't see any way to increase the size of the preview box.
View 2 Replies
View Related
Apr 6, 2012
Having a problem in Gimp 2.6.11 on Windows 7 x64 system. You can watch the video, linked below, but the basics are: I do a selection, scale the selection, make a new layer out of the floating selection result. I try to run a RGB Noise filter on the new layer and no preview shows in the filter dialog or it doesn't show correctly. If I anchor the floating selection into the original layer, instead of making a new layer out of it, the preview shows correctly. Is this a bug... or?
Here is the video link: [URL]
View 3 Replies
View Related
Sep 16, 2012
I have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
View 12 Replies
View Related
Aug 13, 2011
When I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.
View 7 Replies
View Related
Mar 19, 2012
I have a screen splited to 4 and a shoot is played in each one. I would like to put a Filter of Effect that will take one of this pieces and zoom it in till it will fill the complete screen. Just today I noticed a similar video in the Corels site where the introduce the VS X5.
View 1 Replies
View Related
Oct 2, 2013
why the image preview comes up blank (white screen) when i am making changes with different fitlers? reduce noise, unsharp mask etc.
View 8 Replies
View Related
Dec 13, 2011
When I used to use the liquify filter, I was able to see each move/drag as I made it. Now it doesn't show any change until I click 'OK' and only then can I see the result of each 'drag'... So I am sort of having to guess, more or less, where the section I am altering/dragging will end up... Very difficult.
View 5 Replies
View Related
Mar 25, 2008
The new filter gallery takes forever to preview. I assume this is because the preview area is so much bigger. I personally find it much more advantageous to preview a small portion of the image until I get the settings right, then run the filter on the entire image.
Is there a way to run the filter functions in "classic mode", or reduce the size of the preview area so I don't have to wait forever each time I try a new setting?
View 4 Replies
View Related
Dec 25, 2012
I'm using Photoshop CS5.5 and I've placed a layer with my watermark. I'm trying to apply a plastic wrap effect, or many different artistic effects. But I cannot preview what it will look like prior to carrying out the artistic filter.
I think I may have to rasterize the layer or something like that. Basically I carry out the filter. nothing changes.Older versions you could see what was going to happen before you carried it out.
View 1 Replies
View Related
Mar 9, 2013
Would I be able to open a picture and zoom out to 45%. Then open a new layer with a new picture, and keep it at 100%?
Every time I try to change the 2nd layer image to 100% then over lay the first layer, the first layer automatically goes to 100%. Is there a way to keep one layer at 100% and another at 45%?
View 2 Replies
View Related
Nov 1, 2010
I watch all of these people on youtube do these tutorials, but when they zoom in, it doesn't pixelate their picture...
View 2 Replies
View Related
Jun 1, 2013
I used to be able to use the shortcut of ctrl + scrollwheel to zoom around on the image I'm working on. Now I can't get this shortcut to work for me anymore. I tried reinstalling GIMP 2.8.4 with no luck.
View 10 Replies
View Related
Apr 16, 2013
I have a Wacom Bamboo Capture, I'm on a Mac OSX 10.8.3, and I'm using GIMP 2.8.4.
The pen and tablet seem to work together fine, with pressure sensitivity and all, but when I attempt to use the gesture functions (such as rotation) GIMP doesn't respond.
I know the problem isn't with the hardware because the little "rotate icon" pops up when I do the gesture, it's just the way it is communicating with GIMP that is the problem.
View 3 Replies
View Related
Jul 8, 2012
i've two problems with Gimp 280
-first, the new brushes flow slower than before- already at 3000-1700 pixels, 300 dpi. Which are modest measures when you paint seriously. I've some delay pulling a sign with most of my brushes. (Btw, i checked with care my brush dynamics). Some hints of what I should set to get a faster/natural flow ?
-second, the zoom wheel of my wacom tablet is broken with the update to xQuartz 271. 'Never had this problem before-damn, zooming ist important. I worked out some workaround using modifier keys (on the tablet), but its never ever so precise as with the wheel.
specs: XQuartz 271, Gimp 281, Wacom driver 526-3, Mac Os 106-6
View 1 Replies
View Related
Dec 27, 2012
I like to use non-default zoom options like 35% and 75%, but I can't use them both at the same time, and whichever one I'm using disappears every time I open a new image or restart the program. It would be nice if the zoom was controlled by a vertical slider that can go to any number between 1 and 800, or at least 1-100.
View 1 Replies
View Related
Apr 12, 2012
I want to enlarge a small photograph with the zoomtool.And when I try to save it on the desired percentage of 100% or so it returns back to it's original size ;After I have saved it as a new copy (image) with a new name.I have tried all the possibilities to save it within the larger size. Even by printer. Everything was in vain.But once it is transferred to the documents files it goes back to the original size.
View 4 Replies
View Related
Apr 4, 2012
How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
View 2 Replies
View Related
Nov 25, 2013
I've looked through the documentation, and searched the forum, and haven't found a clue as to why this is happening. On my Mac Mini, when I use the "Open..." dialogue, I get a list of files. Clicking on one should bring up a preview, as it does on my Windows 7 machine, but on the Mac the preview stays blank. Even if I try to force a preview update. This is with GIMP 2.8.8.
I never had a preview in my old Photoshop--but it'd be nice to get this to work.
View 1 Replies
View Related
Sep 6, 2012
When I open a folder of images from my camera all I see in the preview pane is file names xxxxxx.jpg and I have to click on each one to make it display. How to make it faster to get to the image I want ? how can I set GIMP to auto load all the files in preview ? or something ?
View 1 Replies
View Related
May 20, 2012
Got a problem here with the map to object filter, or maybe it's just a case of it can't do what I want it to. I thought it best to ask here to find out for sure.
s.xcf (Size: 146.5 KB / Downloads: 30)
The circle at the top and in the foreground is the one that I want to map to a cylinder, but no matter what I do I can't seem to get ride of the other two circles, the one at the bottom and the one in the background. I can erase them after the mapping's finished but I was hoping to find a way to prevent them appear in the first place.
View 6 Replies
View Related
Dec 25, 2013
It used to be in Gimp 2.8.8 for Mac I would see the preview of the brush as the cursor so I could judge what the size was going to be now in 2.8.10 Mac (running Mavericks).
I have no preview. Just an cross hair and the brush icon. So I have to blindly guess the size of the brush. Is there a way to get this back?
View 8 Replies
View Related
Oct 7, 2012
When I start the Open Image process in the Windows version of GIMP and move to a directory and select an image file, I get the message "Creating Preview", which briefly changes to "Preview is out of date". This takes a long tim and may never end, depending on the directory and file I choose. What is going on? Is GIMP creating a preview image of every graphic file in the directory? If so, can I set a low resolution somewhere in the program to reduce the time spent doing this. In some cases I can't see the image after I open the file, but that may be a different problem (feature?) of the program.
View 2 Replies
View Related
Jan 15, 2013
When you're working on an image in GIMP, typically there's a bunch of selection and path spam all over the canvas, and checkered patterns for transparency, and all that stuff.
Is there a way to easily see what your image will look like when exported, without exporting it every single time you want to see what the image will look like?
View 1 Replies
View Related
Nov 3, 2012
I am using Mac 10.7.5 and Gimp 2.8
Earlier today Gimp crashed every time I tried to open a .xfc image.
I eventually resorted to uninstalling Gimp and downloading it again.
It worked fine until I stared using the Filters - specifically the Alpha to Logo > Glossy.
The first time is just, but worked after I Force Quit Gimp and tried again.
However, since then Gimp just hangs every time I try to use the Glossy filter.
I've removed the x Quartz X11 I downloaded for earlier versions of Gimp from my utilities folder. Still no good.
There is another X11 application in the same Utilities folder, but I don't know if I put it there or it belongs with Lion.
I don't know how there was two X11 apps, but they do have different logos.
View 2 Replies
View Related
May 28, 2012
I want to make a normal map with Gimp.
All the tutorials say go to Filters>Map>Normal Map This option doe not show in my Gimp.
Is this an error? Do I need a plugin?
View 1 Replies
View Related
Feb 16, 2012
I want to write a Java program that mimics the plasma filter. However, my first few (as in 30-40) attempts have not been very successful. If GIMP provides algorithms or source code for the filters anywhere?
View 1 Replies
View Related
Aug 22, 2012
I'm learning how to write script-fu scripts. I've managed to resize an image, but I would like to use a filter from within the script-fu script, applying it to the image after it's been resized. More specifically, I'd like to run the Filters->Generic->Dilate filter on the image, before saving it. I've searched on Google for how to do this, but I can't find any references to using filters from within a script.
View 5 Replies
View Related
Apr 1, 2013
I am running Mac OS X 10.8.3, Gimp 2.8.4 and Python 2.6.5
I remember using Slice in the past, but I can't remember if it was before upgrading to Gimp 2.8. Now, there are only 2 items (Image Map and Semi-Flatten) under the Filters/Web menu. Slice isn't there.
View 5 Replies
View Related
Sep 1, 2013
I was just choosing a JPG to open in the gimp Open Image dialog andwhen I clicked on the image to open, I think the preview thumbnail wasof the same image in an uncropped and unprocessed form. Does gimp usesome type of embedded thumbnail as a preview image?
View 2 Replies
View Related
Mar 24, 2013
just installed GIMP 2.8.4 on iMac OS X 10.8.3 and image previews are not showing in preview panel. Had a look thro' docs and tried the suggested "click"/cmd click/ctl click to refresh/force refresh but no joy.
View 1 Replies
View Related
