Importing Nikon NEFs and 1920x1080p video from new D5100. Target video is 1920x1080p h.264. No matter what I do, I can't get the custom pan and zoom box to be widescreen aspect ratio, it is stuck in 4:3. I KNOW it can be done as I managed to do it once with the trial version, but wasn't sure how. Now I want to do it again.
View 3 Replies
We are trialling Revit for the first time and have made good progress in modelling a building we have already designed.
We have set up an A1 title sheet to match our existing one and have successfully printed at A3 by using the Center option with zoom 50%.
However when the zoom sheet size icon is selected the view zooms to an A4 Landscape view and I would rather it zoomed to the extents of the A1 frame but I haven't been able to redefine the sheet settings. Where I can find these settings?
I have opened all Metric Title block families from A0 to A4 and they all appear to zoom to an A4 Landscape extent. Amusingly the A4 Metric Title block is Portrait.
I would like to lock the size of an object regardless of the zoom percentage. When I am zooming in on a vector map (main layer) the objects (on different layers) becomes very big. So I should be able to zoom in/out on the vector map, but the objects shall keep the same size. How can I do this?
View 5 Replies View RelatedI have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
What i want to do is apply an overlay on a map which has white lines crossed in the middle to pinpoint a location, i want them to move into location, not be static
I managed what i wanted using a JPG image, white lines, black background, and use the chromakey to remove the black, but that left the lines blurry and not as defined
I saved an image as a PNG with white lines on transparent background, which works great for keeping it all looking crisp and clear, but when i click to do a Pan & Zoom on the image under the Edit / Attribute tabs on the image, the Pan & Zoom cannot be chosen and isnt highlighted
Can it be done on a PNG image or just JPG?
As I load photos into the video track, some of them allow me to apply panning and zooming (either auto p&z or customized), and others don't allow it.
For about half my images, the auto p&z is grayed out, and on the Photo Options panel, the P&Z option is gray and the radio button can't be activated.
For both images that work and images that don't work, they are all .tif files of varying sizes. I can't see any logic in why some images allow P&Z and others don't. I'll drag and drop an image onto the video track, and if the P&Z is grayed out, I'll delete it, drag and drop another image, and boom, no problems.
P&Z is active.What's the problem?
I am using pro X4 on windows 7. For my current project I am doing a slide show with added titles and audio. I decided to try pan & zoom. So on the menu bar I selected edit and then selected auto pan & zoom. This applied pan & zoom to all the photos (over 100). As I have previewed the results, I find the pan & zoom effects for many of the photos is not appropriate meaning faces are being cut off etc. I know I can go in and customize the settings for pan & zoom and even copy the attributes to all the photos. At this point what I really want to do is turn off pan & Zoom. I select auto pan & zoom from the edit menu with no impact. I select a photo and open the option window. The radio button for pan & zoom indicates that it is active. I can't deselect the radio button. how to turn off pan & zoom. I would like to do it to all the photos in one step like I turned it on.
View 2 Replies View RelatedI am asking about zoom and pan on video. I used the crop filter to do a basic zoon and pan on a video but the level of control is quite primitive.
Any plugin that provides better control of zoom and pan? Something with a motion path for example. I discovered the use of the crop feature on youtube.
Why in CS6 when zoom changes window size and a floating window fits in Photoshop window or on other display screen do I get scroll bars where a select all selection marching ants are not visible on all four sides till I drag out the window to get rid of the scroll bars so I can see all of marching ants.
In previous versions of Photoshop space for scroll bars is present but there are no scroll bar, select all marching ants are visible on all four sides when an image's window fits in Photoshop window or on second display. Is there a way to make CS6 work like previous versions? Also if I just open a document and Photoshop fits it to Photoshop window or second display the floating window is correct without scroll bars.
Adobe decided to remove the 'Print Size' button/option from the 'Zoom' tool in Photoshop 13.0.2..I use this heavily as I run a print lab and I often need to show people on screen what the size of their print will be (I have set the correct ppi for each display in preferences).
I am absolutely amazed they could remove a feature like this without any warning in a minor update. The irony is that for the first time ever retina displays have enough resolution to assess sharpness without going to 100% and the 'View Print Size' is more useful than ever before.
I will probably have to roll back to the last Photoshop version on all systems but before I do, any way to get the 'Print Size' option back?
i get a 1 pixel size image when I double click the zoom for 100%.Fit screen or full screen is wacky too, not fitting or filling and sometimes going way beyond.
View 1 Replies View RelatedI've created a viewport, selected it and since gone to zoom the relevant image until it is the desired size within the viewport.
I've done this a million times before without a problem, but am having terrible difficulty at the moment.
Once I've zoomed the image to size and subsequently exited the viewport frame (to view the sheet) my image disappears - I believe it just becomes a microdot.
Incidentally, when I initially go to zoom the image to fit the viewport window, I have to use the zoom, extents, 'select all' (CTRL A) and then significantly enlarge the component of the drawing I wish to have fill the viewport window.
Why is it that the zoomed image fills the viewport window when editing the viewport contents and then disappears (turns back into a microdot) when I've finished editing the respective viewport?
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies View RelatedI'm playing around with time lapses in VS5 and am having some success. One thing I can't work out though is how I go about adding Pan &/or Zoom to a sequence. I can add it to individual images but i'm not sure how to add the effect over a series of say 300 images so that it's a smooth motion?
View 14 Replies View RelatedI'm using X5.
I would like to create a certain zoom effect, but I can't get it done. I'm working with graffiti photo's. I want to show a wall with several different pieces on it. After a few seconds, a photo showing just one of those pieces appears in an overlay. It is placed at the same spot where its background-twin is located and its resized to match its appearance. That small overlay now has to grow in size so it eventually fits the entire screen. It is however important that, during this 'zoom effect', the background photo remains visible.
I have tried to work with the Picture-in-Picture effect from NewBlue, which sounded like the solution. I managed to get the entire thing done, except for making the background visible during the effect. The resized overlay picture is surrounded by a black screen that covers the background photo and I can't figure out how to make that black surface transparent. It ís possible to make the entire overlay transparent, but that also affects the black color in the photo, which obviously messes it up.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
Application Timestamp:4ec5d8d8
Fault Module Name:libiomp5md.dll_unloaded
Fault Module Version:0.0.0.0
Fault Module Timestamp:4a811f19
Exception c0000005
Exception Offset:0e7119c8
OS Version:6.1.7601.2.1.0.768.3
Locale ID:3081
Additional Information 1:0a9e
Additional Information 2:0a9e372d3b4ad19135b953a78882e789
Additional Information 3:0a9e
Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
[URL]........
If the online privacy statement is not available, please read our privacy statement offline:
C:windowssystem32en-USerofflps.txt
The old photos were scanned in at 300 dpi. Many of them were then cleaned up (spots and scratches removed, etc.) using Microsoft Digital Image Pro 10 (which we also did on previous projects). My wife then began creating her project essentially using all of the VideoStudio defaults. She added a custom pan and zoom to every photo so that the slide show has some motion, and the person or object of interest in the photo gets enlarged and emphasized.
Problem 1: as some of the photos move, there is a visible twitch or judder--not sure what word I should use to describe it. It's like the picture jiggles a little as it moves. The problem is not in the burn, the DVD player or television, because you can see it happening when you watch the preview of the project in the software, edit mode. It seems to be random, I cannot discern a pattern to which photos, where on the timeline, which transition, etc., is related to the issue.
Problem 2: my wife created this project for a 4:3 aspect ratio TV, so the crop box that was used for all of the custom pan and zoom was 4:3. I would like to create a new version of the project, with all of the photos re-cropped, re-zoomed and re-panned using a 16:9 box. The problem is, I cannot figure out how to delete or un-do all of the existing 4:3 panning and zooming. I have tried opening the program with the 16:9 box checked, then opening the project file, then deleting photos from the time-line, and re-linking to a new copy of the same photo. When I open the pan and zoom box for the photo, it has a 4:3 aspect ratio crop box! Note that if I start a new project and drop the same photo on the timeline, I do get a 16:9 box for pan & zoom. So it seems that 4:3 is associated with the existing project, and I can't figure out how to get rid of it. I really don't want to have to re-create the whole thing from scratch. Is there a simple way to be able to re-do the pan & zoom at 16:9?
I tried selecting all of the photos on the timeline, right-clicking, then choosing auto pan and zoom, to see if that would re-do it using a 16:9 crop box (which could then be customized). No joy, it again used a 4:3 box.
I know that ProX4 does not provide panning and zooming of video, but any way to do this using the overlay tracks?
View 1 Replies View RelatedIs it possible to change the default black background color in customize pan and zoom?
View 6 Replies View RelatedI'm currently creating slide show with about 1,000 photos. BTW, I need to apply automate pan and zoom feature on all 1,000 photos. Is there any method to apply this at one time instead of manually every single photo?
View 2 Replies View RelatedI am on X4 and go back years with the program. I thought there was a feature to select only a part of the screen and be able to zoom on that on playback in the project. was this in an earlier version? I cannot find this feature in X4. I know I can do this for an image but want to do it for close ups in videos.
View 4 Replies View RelatedI have a high res image of a map and I want to add it to a project and ZOOM in to a particular spot on that image.
I also want the image to stay unzoomed for a short time, then zoom in and then remain zoomed in for a short time.
I have added two 'key frames' (using add key frame) and have applied the zoom between them.
My problem is how to make sure the image doesn't move between the start and the first key frame (and between the second key frame and the end). I know that I can drag the RED CROSS using my mouse but I am finding it almost impossible to end up with the image without at least one black stripe on one edge (ie image not centered).
The result is that the resulting video clip moves slightly on the screen between the start and key frame 1 (and also between the zoomed in image at the second key frame and the end of the clip).
Is there a method like 'snap to grid) to force the image to the same place as the previous key frame?
Problem zoom, when visionage and exporting my videos, they are zoomed while I put the original video settings. However when I put break in the previsualisage video, it returns to its normal size. How do I get it retains its original size and delete this zoom effect ?
View 8 Replies View RelatedI am using both Paint Shop Pro X3 & Video Studio X3. I'm putting together a slideshow and when I use Pan & Zoom to zoom on a particular subject (as a bee on a flower) after so much zoom the picture blurs. I have a very good camera and the photo remains sharp in Paint Shop Pro in extreme zoom. Is there a way to sharpen the image while zooming in Video Studio?
View 4 Replies View RelatedHow do I get a Freeze frame at the begining and end of a Pan & Zoom Optical?
View 3 Replies View RelatedWhen I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.
View 7 Replies View RelatedI have a screen splited to 4 and a shoot is played in each one. I would like to put a Filter of Effect that will take one of this pieces and zoom it in till it will fill the complete screen. Just today I noticed a similar video in the Corels site where the introduce the VS X5.
View 1 Replies View RelatedI am building a highlight video for my son who is a wrestler. I had the idea at the beginning to zoom in on one of his sr pics towards his eye. I want a the video to start in his eye but as zooming is complete it will end up full page video.
View 12 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedThe AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
