VideoStudio :: Where Is De-interlace Filter In X3
Mar 4, 2011
I have some old 8mm family films which decades ago (back in 1980) were converted to VHS.The 8mm reels are long gone now, they got moldy, brittle and turned to dust, so I binned them around 1992.About 6 years ago, we converted the VHS tapes to DVD - direct copy from VHS deck to DVD recorder - so the family could enjoy the tapes again, because they were getting too old. We binned the VHS tapes about 3 years ago.
So here is my conundrum:Considering I have no longer access to the original 8mm reels, and the VHS tapes are long gone as well, during the process of copying across from VHS to DVD the 'interlace' has remained and become digitally burned into the VOB files... is this correct in my thinking?
The reason I say this is because now that I'm trying to bring these old films back to life (which were VERY dark) I can start to see the interlaced lines start to show up as I lighten them in X3.So my curious mind is now wondering:
-Is there a way I can remove those lines?
-Where is the 'de-interlace filter' in X3?
View 9 Replies
ADVERTISEMENT
Aug 7, 2012
Awhile back I captured some video from my old DV camcorder. I am finally getting around to it again and noticed some interlace problems with the video. Not sure why it is there in the first place.
The original video was captured using AVI with "DV Video Encoder -- type 1". I tried to re-render the clip using Upper Frame First, Lower Frame First, and Frame-Based with no change. I then tried again with SmartRender turned off. In this case, with Smart Render off and selecting Frame-Based, I was able to eliminate the interlace artifacts. I don't really understand why that worked though?
I was then going to re-render all the clips using Batch Convert, but I don't see an option to disable SmartRender from the Batch Convert dialog. Is there a global setting in preferences to disable SmartRender? I don't want to re-render all clips one-by-one.
View 4 Replies
View Related
Apr 19, 2013
How can you de-interlace a photo from video in PSE11 it was always possible in all versions until now (tried copying pluggin from PSE 10 but did not work)
View 3 Replies
View Related
Sep 17, 2011
I've blown up the attached image to 200% and cropped the most problem area -- this is only for online/RGB viewing, not hard-copy print. The hand/body part of this crop is from a frame taken with my Canon HV30 camcorder which only goes to HD resolution (1920x1080i) and due to low-light, it's got some bad artifacts. Mainly the green splotches.
I've already done as much Transform/Fix Interlace as I can up to the point where it can start losing definition.
Seems like the only thing as far as I know is to dive in and clone all those areas one by one using the clone took by borrowing "good adjacent territory" to clean up the mess. I've tried a close up "Replace Colors" but it's a bit too hit-and-miss.
View 14 Replies
View Related
Sep 16, 2012
I have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
View 12 Replies
View Related
Sep 30, 2013
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
View 1 Replies
View Related
Aug 20, 2013
I'm a user of Corel x6 at the moment and it works perfectly. I wonder if there's a sort of VHS filter/mask available to be used with Corel x6 so the digital copy looks a bit 'damaged' and as if it was recorded in the 1980s.
View 3 Replies
View Related
Nov 6, 2011
Filter does not shift in the UVS Pro X4. When applied to the chest and later attempt to modify or even delete it the program shuts down. . Win7 x64 System
View 2 Replies
View Related
Oct 29, 2010
when I split the sound off the video I can not apply the audio filter to the sound clip
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): MTS
What devices are involved and their mode of connection?: NA
Project Properties (important): NA
Output format (file, DVD, VCD, SVCD): NA
Output Properties (cogwheel in lower left of burn screen): NA
PAL or NTSC: NA
Error Codes (if any): NONE
Product Version: VS X3 Pro
View 4 Replies
View Related
Aug 25, 2011
I have a nephew that send me a bunch of video's from his camera, they are 90 degrees to the left.Is the easiest way or only way to do it is the use the rotate filter?
View 7 Replies
View Related
Apr 14, 2013
I've been using VS 5 for awhile. The sharpness filter, when you put it on a clip, goes from soft to hard as the clip progresses.
How do I set it so that the clip stays sharp- start to finish ?
View 2 Replies
View Related
Apr 17, 2011
Is there a way to save a FILTERS ATTRIBUTES to recall for use in my next project, PRO X3.Titles can be saved, and a type of filter can be saved in FAVORITES, but not the attributes.Have searched here, and tried in the program, but no luck.
View 3 Replies
View Related
May 10, 2011
I have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
View 4 Replies
View Related
Apr 4, 2013
I am wondering if there is an easy method to apply a video filter to EVERY video clip in a project instead of having to apply it manually to every clip.
View 2 Replies
View Related
Apr 7, 2013
After trimming a clip I can save it by File - Save trimmed clip. But if I use filter(s) with trimming before, after or no trimming, the File - Save trimmed clip greys out and I could not find any instruction how to save (render) the clip.
View 4 Replies
View Related
Apr 5, 2013
As I am having problems with a NewBlue video filter (Picture in Picture - see separate post with no replies so far) I would like to find out if video filters (esp NewBlue) are stored in a folder which is not a subfolder of Corel/VideoStudio (and which may not get removed during an uninstall). Where they are located (as I cannot locate them).
View 5 Replies
View Related
Jun 4, 2012
I'm trying videostudio pro x5 and it looks very nice, but I have a problem that I think will lead to be a big limitation in the potential this software has, so I guess this is a bug or maybe I am not using it in the right way. I just hope is not that way by design
Anyway, the problem is that when I apply a filter to an animation or to an image (like PNG) that has alpha channel, I can see the filter coverin the whole frame if the clip is in the main video track, while if I move it to the overlay track the filter will only stay inside the picture, for example I've tried this with the lens flare.. please see this image (situation 1 on top and then situation 2 bellow the orange line):
I'd expect the lens flare to go over the transparent area of the clip so that it will be overlaid with the "background" main video track, but it is not. This is just an example but for example the same happens if I apply the lightning filter to a text filter or to a png..
I also have a similar concern with the free TitlerEx plugin that I've downloaded after registering: if I put it on an overlay track I can't just have the text with transparent background overlaid to the main video track.
View 12 Replies
View Related
Dec 24, 2011
Is there a filter for keystone correction or another product I could pre-process my clips though for keystone correction?
View 4 Replies
View Related
Dec 3, 2011
Is there an easier way to crop a video than using the cropping filter? I'd love to flip some bit that makes dragging in the border of a video crop instead of distorting the aspect ration. Is there a faster way?
View 2 Replies
View Related
May 9, 2013
Can a filter be applied to just part of clip instead of the whole clip? I mean a way to easily adjust when a filter starts during the clip and when it ends. I'm not interested in anything involving splitting a clip because you really can't try out different start and end times simply this way. I thought about doing it by adding keyframes, but the few filters I've tried can't be turned off completely and leave residual effects that can be seen.
There's an editing feature in AVS Video Converter and you add effects to a video clip on a separate timeline just below the video timeline, and it's easy to move the effect on the timeline and you can change the length of the effect by dragging the ends. Is there something similar in Videostudio?
View 2 Replies
View Related
Jul 10, 2012
I'm still using VS pro 3 and have a problem with my color yellow. I get a message 'color has been changed by filter.' How can I undo the filter and get my original color yellow back?
View 2 Replies
View Related
May 4, 2012
I was having trouble making some of my plugins appear in x5 Filter screen, so was trying.
[URL] .......
Basically, I renamed(even tried deleting) ULVFT.DAT from below folder(since I'm using Vista):
C:UsersXXXXXAppDataRoamingUlead SystemsCorel VideoStudio Pro15.0en-US
But now, some of my plugins started to appear as duplicates. (See attachment)
View 3 Replies
View Related
Oct 11, 2010
With VS 11+ not running on XP Home I went to
[URL].......
to download the New Blue Cartoon filter. I Selected the Host Platform as Windows In the free effects set up box VS was already selected Destination folder was designated as prog files New blue free effects for windows.
In the New Blue Free Effects install Assist for VS box it said that the path would be to the vft.plug (via prog filesUL SystemsULVS11). In my VS11+ vft_plug folder-- New Blue Cartoonr,vtf files 131kb and date modified 26 06 2010 showed.
But the filter is not there in the filter library of VS.Did not show on reboot either.I was not asked to register.
View 14 Replies
View Related
Sep 29, 2013
I used the Pinch filter function for barrel correction in GoPro video. Unfortunately it does not correct the whole pictures area: the corners remain untouched. Is there any real barrel correction (fish eye lens correction) filter available for Video Studio?
View 4 Replies
View Related
Aug 13, 2011
When I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.
View 7 Replies
View Related
Mar 19, 2012
I have a screen splited to 4 and a shoot is played in each one. I would like to put a Filter of Effect that will take one of this pieces and zoom it in till it will fill the complete screen. Just today I noticed a similar video in the Corels site where the introduce the VS X5.
View 1 Replies
View Related
Dec 13, 2012
I'm trying to get text to scroll across the screen full height coming from the right to left, scroll across the screen at certain times of the video. I saw some animation presets there for text but not what I'm looking for. What I'm trying to do: along with a song, every time the name of the song comes up in the chorus, I'd like to scroll those words across the full height of the video as an overlay. And if it was just a graphic instead of text going across, what would I use to achieve that?
View 5 Replies
View Related
Dec 17, 2010
I have Corel Video Studio Pro X3
I live in Europe so that's PAL. But I also want to make DVD's for my family in the USA, and that is NTSC. I know I can choose to burn a DVD in PAL or NTSC at the DVD factory.
What I do NOT understand is: When I want to edit my video files I can choose for PAL or NTSC at Settings>Preferences>edit color filter. What does this setting do?
Also when I check Project Properties it always says PAL, even when I choose NTSC at Settings>Preferences>edit color filter. How I can edit video files and then burn DVD's in Pal & NTSC format without having to make separate editing for both formats.
View 8 Replies
View Related
Feb 28, 2011
When I apply a video filter the sliders and button under the original/preview box are hidden beyond access by the windows box's boundaries.
I can see they're just hidden below the timeline of the split original/preview section. Can't seem to maximize the windows box to show the whole thing and access them. Here's a picture to show: [URL].......
Is this a common problem? Is there a work around? Has it been fixed in VS X4?
Quick edit: this happens with more than just one filter.
View 2 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Aug 25, 2013
I tried to use the lens flare filter in Photoshop CS6.While the lighting effect is interesting, it introduces ugly artifacts like blue or orange blobs (which are supposed to be the reflection of the diaphragm, but do not look anywhere close to that, but instead are just cheesy looking blobs of color).
In the "movie prime" setting blue lines are added which have nothing to do with lens flar.On top of it, the preview is about the size of a stamp. Any way to use the filter without getting these artifacts, or is it - what I assume - just a useless toy filter, that has probably been dragged on for years and years because it's always been there? What do you use to create a lens flare effect? Are you just building it from scratch with brush work?
View 5 Replies
View Related
