Photoshop Elements :: How To De-interlace A Photo From Video
Apr 19, 2013How can you de-interlace a photo from video in PSE11 it was always possible in all versions until now (tried copying pluggin from PSE 10 but did not work)
View 3 Replies
ADVERTISEMENT
Corel PHOTO-PAINT X5 :: Removing Interlace Artifacts
Sep 17, 2011I've blown up the attached image to 200% and cropped the most problem area -- this is only for online/RGB viewing, not hard-copy print. The hand/body part of this crop is from a frame taken with my Canon HV30 camcorder which only goes to HD resolution (1920x1080i) and due to low-light, it's got some bad artifacts. Mainly the green splotches.
I've already done as much Transform/Fix Interlace as I can up to the point where it can start losing definition.
Seems like the only thing as far as I know is to dive in and clone all those areas one by one using the clone took by borrowing "good adjacent territory" to clean up the mess. I've tried a close up "Replace Colors" but it's a bit too hit-and-miss.
VideoStudio :: Where Is De-interlace Filter In X3
Mar 4, 2011I have some old 8mm family films which decades ago (back in 1980) were converted to VHS.The 8mm reels are long gone now, they got moldy, brittle and turned to dust, so I binned them around 1992.About 6 years ago, we converted the VHS tapes to DVD - direct copy from VHS deck to DVD recorder - so the family could enjoy the tapes again, because they were getting too old. We binned the VHS tapes about 3 years ago.
So here is my conundrum:Considering I have no longer access to the original 8mm reels, and the VHS tapes are long gone as well, during the process of copying across from VHS to DVD the 'interlace' has remained and become digitally burned into the VOB files... is this correct in my thinking?
The reason I say this is because now that I'm trying to bring these old films back to life (which were VERY dark) I can start to see the interlaced lines start to show up as I lighten them in X3.So my curious mind is now wondering:
-Is there a way I can remove those lines?
-Where is the 'de-interlace filter' in X3?
VideoStudio :: Interlace With Captured DV Files
Aug 7, 2012Awhile back I captured some video from my old DV camcorder. I am finally getting around to it again and noticed some interlace problems with the video. Not sure why it is there in the first place.
The original video was captured using AVI with "DV Video Encoder -- type 1". I tried to re-render the clip using Upper Frame First, Lower Frame First, and Frame-Based with no change. I then tried again with SmartRender turned off. In this case, with Smart Render off and selecting Frame-Based, I was able to eliminate the interlace artifacts. I don't really understand why that worked though?
I was then going to re-render all the clips using Batch Convert, but I don't see an option to disable SmartRender from the Batch Convert dialog. Is there a global setting in preferences to disable SmartRender? I don't want to re-render all clips one-by-one.
Photoshop Elements :: Keeping Photo Size When Dragging And Dropping Photo Into New Document
Nov 20, 2013When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies View RelatedPhotoshop :: Aged Photo/Video Design
Apr 27, 2004I wanted to start out by asking if anyone knew of any websites, images, galleries which feature designs which are made to look beaten, old, vintage, dust ridden and just nasty, I'm getting into that whole spectrum of graphic design and I wanted to see some examples, maybe some tutorials or plugings.
View 2 Replies View RelatedPhotoshop Elements :: Rotate Insert In Photo Without Rotating Entire Photo In 11?
Aug 18, 2013On Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies View RelatedPhotoshop Elements :: Remove White Film On Photo After Scanning Photo?
Feb 11, 2014How can I remove a white film on my photos after scanning the photos?
View 1 Replies View RelatedPhotoshop Elements :: Make Photo Sepia And Leave Item In Photo Original Color?
Aug 11, 2013How do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedPhotoshop Elements :: Cropped Photo Look Like A Broken Page Inside Version Set With Original Photo?
Sep 4, 2013Why does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View RelatedPhotoshop Elements :: 11 - How To Extract A Person From One Photo And Insert In Another Photo
Dec 8, 2012in elements 11 how can I extract a person from one photo and insert that person into another photo? I'm totally new to this and my software booklet doesn't say and I'm lost.
View 2 Replies View RelatedPhotoshop Elements :: How To Add A Person From 1 Photo To A Group Of People In Another Photo
Dec 6, 2013how do i add a person from 1 photo to a group of people in another photo (using elements 9)
View 1 Replies View RelatedPhotoshop :: Embed Video And Photo In JPEG Image
Nov 24, 2013How do I embed video and photo in a JPEG image? Is Photoshop the right tool for this task? I have Photoshop CC installed.
View 1 Replies View RelatedPhotoshop :: Make A Photo Frame For Music Video
May 14, 2008I'd like to make a graphic to be used to frame video footage for a music video I am shooting. I'd like for the 'frame' to make the footage look like a 1920's photo that is damaged around the edges. I want to give the audience the impression they are looking at an old photo that has an animated video in it.
I've exported a few samples as a test. The center was transparent upon export, yet became white when I re-opened the image. I'm not sure what I'm doing wrong. The background setting was selected as 'transparent'.
Photoshop Elements :: How To Cut Out Image From One Photo And Paste It In Another Photo
Jan 14, 2014I did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies View RelatedPhotoshop Elements :: Transferring Layer From Photo Bin To Another Photo
Dec 10, 2012I have PSE 11 and I am creating a Christmas theme with various pictures. I have my main photo with 6 layers including a tree and figures which I can move independantly and the background is the checkerboard as the main layers are turned off with only my selections showing. I also have another photo where I have selected part of it and also turned off the main layers leaving a small part with checkered background. When I have the main photo loaded and drag the other one from the photo bin with the move tool, nothing appears on the main picture. I have already dragged the Christmas tree in the same way and that worked. By the way, all the files are .PSD.
View 6 Replies View RelatedPhotoshop Elements :: How To Shift Object From Photo 1 To Photo 2
Apr 28, 2013tried several times to shift an object from Photo 1 to photo 2:
identified the object in photo 1, e.g by using the lasso
stored it by edit/copy (or strg/c)
opened photo 2
edit/insert (or strg/v)
object appears in photo 2, but without the frame it was supposed to come with - and by which I could enlarge / minimize / shift it....
made a mistake or software error?
Photoshop Elements :: How To Take A Section Of Photo And Make It Whole Photo
Dec 10, 2012I have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies View RelatedPhotoshop Elements :: Copy A Selection From One Photo Into A Different Photo
Mar 10, 2014In Elements is it possible to copy a selection from one photo into a different photo, i.e copy and paste
View 5 Replies View RelatedPhotoshop Elements :: Replace Face On One Photo To Another Photo?
Nov 19, 2012how do i replace a face on one photo to another photo
View 4 Replies View RelatedPhotoshop Elements :: 9.0 - Blend A Photo Into Another Photo?
Sep 11, 2013How can I blend a photo into another photo. In other words, when I load a picture into elements 9, and I load another picture on top of that one, How do I fade it in where it is seen but but is faded in?
View 1 Replies View RelatedPhotoshop Elements :: How To Superimpose Photo On Another Photo
Dec 4, 2012How to superimpose a photo on another photo?
View 2 Replies View RelatedVideoStudio :: Zooming In And Out Of Photo For A Video
Sep 9, 2011I forgot my login/password and am unable to recover it. Tried having it sent to my email, but it never shows up so I had to create a new account.
I have Video Studio Pro x4
And I am about to start a video for a foster dog I have. Basically, I want to take a whole bunch of pictures (and possibly a short clip or two) and put them into one video and post on Youtube for the rescue to use.
Here is the one I did for the last rescue dog I did when he got adopted and was waiting for his new owners to come and get him. (I know nothing overly fancy, but I am happy with it). [URL] ......
Now, my question is this. Another lady in the rescue did a video seen here: [URL] ........
She zooms in and out of some pictures and I REALLY like that effect. I emailed her and she said she did it on a Mac and it's called the "Ken Burns Effect" Is something like that possible using Video Studio? And if it is, how the heck do I get that to work?
VideoStudio :: Remove Unused Video And Photo
Sep 1, 2013I'm finishing a project but to keep my HD a little bit clean I would like to remove the unused video and photo,
I know that you can do this one by one, but if you don't document the used parts how to identify the used and unused ones?
VideoStudio :: Make Video Mask That Looks Like A Photo
Aug 29, 2011I can't seem to find any masks, or make a successful one myself in Paint Shop Pro, that creates a white photo border around a video, to make it look like a bordered photograph. All the edges I've made want to let the video show through the white border. How to do this? I just need a white border around a video to appear as if it's a photograph.
View 7 Replies View RelatedVideoStudio :: Inserting Photo In Video Track
Jun 9, 2011I am putting together a biographical video of my wife and myself for our kids (married 50 years). I want to have a video of her (example) sitting and talking about growing up. Is there a way to insert a photo on the main video track and still keep the voice track intact? Example: She is talking about her childhood. A photo apears of her as a small girl while she is still talking. The photo goes away after a few seconds and there she is live and taliking. I hope to get away from using the overlay track.
View 6 Replies View RelatedVideoStudio :: Download Video / Photo Masks
Nov 30, 2012I'm wondering if there is a site where I can download video/photo masks for my projects. I'm definitely not good at trying to create them myself in PSP, and there are hardly any in the "mask frame" in VS4 (I haven't installed VS 5 yet).
View 6 Replies View RelatedVideoStudio :: Convert Video To JPG Format Using Photo Impact 11?
Jan 16, 2012Is there any way that i can convert a video into the jpg format using Video Studio 10+ or Photo Impact 11 ?
( that is apart from the " save as image " in Studio) Like a batch convert job.
Or perhaps a freebie converter out there.
VideoStudio :: Photo / Video Bundle X5 No Longer Ultimate?
Nov 27, 2012Previous versions of the Photo/Video Bundle included the Ultimate versions of Paintshop and Videoshop.
Looking at the web page and box photo for the X5 version of the bundle, it seems to now include only the non-Ultimate versions.
Confirm that the Photo/Video Bundle X5 has been lowered to the Penultimate versions?
Photoshop Elements :: Photo Collage Backgrounds And Themes Available In Elements 8
Mar 12, 2013How can I use the photo collage backgrounds and themes available in Elements 8 but not in Elements 11?
View 3 Replies View RelatedLightroom :: Captured Photo From Video Stacks - Cannot Select For Editing
Jan 11, 2012So I have to say I love LR4, the only prob is if I capture a frame from one of my videos I cant access it. When I go to grid mode just like Julieanne does my captured photo is stacked on top of my video & I cant select it to edit it.
View 3 Replies View Related