I'm still using VS pro 3 and have a problem with my color yellow. I get a message 'color has been changed by filter.' How can I undo the filter and get my original color yellow back?
View 2 RepliesI have Corel Video Studio Pro X3
I live in Europe so that's PAL. But I also want to make DVD's for my family in the USA, and that is NTSC. I know I can choose to burn a DVD in PAL or NTSC at the DVD factory.
What I do NOT understand is: When I want to edit my video files I can choose for PAL or NTSC at Settings>Preferences>edit color filter. What does this setting do?
Also when I check Project Properties it always says PAL, even when I choose NTSC at Settings>Preferences>edit color filter. How I can edit video files and then burn DVD's in Pal & NTSC format without having to make separate editing for both formats.
Is there a way to change the theme or interface of VSx5 to a different color than black? I can barely see the buttons and functions because they are all grey on black. If I turn my monitor brightness up then I get a headache so I'm thinking there must be some way to change the color of VS itself. I've looked and can't find anything.
View 4 Replies View RelatedUsing VS9 (I know I need to upgrade.) I'm making a video to be shown on a 16x9 screen and have selected the 16x9 format. I have many 4x3 videos and pictures. In my original "preferences" I selected Blue as the Background color, added about 100 video clips and still pictures that now have blue on both the right and left edges of the screen. Is there a simple way to change this to grey or do I need to start over?
View 1 Replies View RelatedI have recently purchased Corels VideoStudio X5 Pro. Having successfully created my own menus in Ulead Photo Impact 12 and imported into Video Studio X5 (and actually getting them working) I have been creating new frames to use in the menus, mainly so that I can change the color to suit whatever background I use. I would like to be able to choose the color of the highlight and also possibly how the frame is highlighted.At the moment the frame is highlighted by completely covering the scene within the frame with either a yellow or cream highlight. I would like to create a border within the frame and have this as the highlight.
I have tried doing this and naming the border as HLI but when imported into Video Studio X5 it does not highlight the border, but the whole scene as before.
Many of the transition effects have a green color. Is there a way to change mulitples at a time or is the only way to do one at a time? I'd rather use a more neutral color than bright kelly green.
View 3 Replies View RelatedI have long been using the program. I like the filter Video Pan and Zoom, if not a big BUT.
If the clip you select multiple control points pan and some of them coincide with the center, it is impossible to capture the crossing point for the desired position correction frame, since the engine is the player immediately jumps to the first control point. If the pre-shift frame with panels Anchor, then grab the frame with the mouse is already possible, but the trajectory of the frame after this change. The latter leads to the door frame at the edge of the screen in motion.
How to select a frame, which is currently in focus when several centers framework be at each other?
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
View 1 Replies View RelatedI'm a user of Corel x6 at the moment and it works perfectly. I wonder if there's a sort of VHS filter/mask available to be used with Corel x6 so the digital copy looks a bit 'damaged' and as if it was recorded in the 1980s.
View 3 Replies View RelatedFilter does not shift in the UVS Pro X4. When applied to the chest and later attempt to modify or even delete it the program shuts down. . Win7 x64 System
View 2 Replies View Relatedwhen I split the sound off the video I can not apply the audio filter to the sound clip
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): MTS
What devices are involved and their mode of connection?: NA
Project Properties (important): NA
Output format (file, DVD, VCD, SVCD): NA
Output Properties (cogwheel in lower left of burn screen): NA
PAL or NTSC: NA
Error Codes (if any): NONE
Product Version: VS X3 Pro
I have a nephew that send me a bunch of video's from his camera, they are 90 degrees to the left.Is the easiest way or only way to do it is the use the rotate filter?
View 7 Replies View RelatedI have some old 8mm family films which decades ago (back in 1980) were converted to VHS.The 8mm reels are long gone now, they got moldy, brittle and turned to dust, so I binned them around 1992.About 6 years ago, we converted the VHS tapes to DVD - direct copy from VHS deck to DVD recorder - so the family could enjoy the tapes again, because they were getting too old. We binned the VHS tapes about 3 years ago.
So here is my conundrum:Considering I have no longer access to the original 8mm reels, and the VHS tapes are long gone as well, during the process of copying across from VHS to DVD the 'interlace' has remained and become digitally burned into the VOB files... is this correct in my thinking?
The reason I say this is because now that I'm trying to bring these old films back to life (which were VERY dark) I can start to see the interlaced lines start to show up as I lighten them in X3.So my curious mind is now wondering:
-Is there a way I can remove those lines?
-Where is the 'de-interlace filter' in X3?
I've been using VS 5 for awhile. The sharpness filter, when you put it on a clip, goes from soft to hard as the clip progresses.
How do I set it so that the clip stays sharp- start to finish ?
Is there a way to save a FILTERS ATTRIBUTES to recall for use in my next project, PRO X3.Titles can be saved, and a type of filter can be saved in FAVORITES, but not the attributes.Have searched here, and tried in the program, but no luck.
View 3 Replies View RelatedI have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
I am wondering if there is an easy method to apply a video filter to EVERY video clip in a project instead of having to apply it manually to every clip.
View 2 Replies View RelatedAfter trimming a clip I can save it by File - Save trimmed clip. But if I use filter(s) with trimming before, after or no trimming, the File - Save trimmed clip greys out and I could not find any instruction how to save (render) the clip.
View 4 Replies View RelatedAs I am having problems with a NewBlue video filter (Picture in Picture - see separate post with no replies so far) I would like to find out if video filters (esp NewBlue) are stored in a folder which is not a subfolder of Corel/VideoStudio (and which may not get removed during an uninstall). Where they are located (as I cannot locate them).
View 5 Replies View RelatedI'm trying videostudio pro x5 and it looks very nice, but I have a problem that I think will lead to be a big limitation in the potential this software has, so I guess this is a bug or maybe I am not using it in the right way. I just hope is not that way by design
Anyway, the problem is that when I apply a filter to an animation or to an image (like PNG) that has alpha channel, I can see the filter coverin the whole frame if the clip is in the main video track, while if I move it to the overlay track the filter will only stay inside the picture, for example I've tried this with the lens flare.. please see this image (situation 1 on top and then situation 2 bellow the orange line):
I'd expect the lens flare to go over the transparent area of the clip so that it will be overlaid with the "background" main video track, but it is not. This is just an example but for example the same happens if I apply the lightning filter to a text filter or to a png..
I also have a similar concern with the free TitlerEx plugin that I've downloaded after registering: if I put it on an overlay track I can't just have the text with transparent background overlaid to the main video track.
Is there a filter for keystone correction or another product I could pre-process my clips though for keystone correction?
View 4 Replies View RelatedIs there an easier way to crop a video than using the cropping filter? I'd love to flip some bit that makes dragging in the border of a video crop instead of distorting the aspect ration. Is there a faster way?
View 2 Replies View RelatedCan a filter be applied to just part of clip instead of the whole clip? I mean a way to easily adjust when a filter starts during the clip and when it ends. I'm not interested in anything involving splitting a clip because you really can't try out different start and end times simply this way. I thought about doing it by adding keyframes, but the few filters I've tried can't be turned off completely and leave residual effects that can be seen.
There's an editing feature in AVS Video Converter and you add effects to a video clip on a separate timeline just below the video timeline, and it's easy to move the effect on the timeline and you can change the length of the effect by dragging the ends. Is there something similar in Videostudio?
I was having trouble making some of my plugins appear in x5 Filter screen, so was trying.
[URL] .......
Basically, I renamed(even tried deleting) ULVFT.DAT from below folder(since I'm using Vista):
C:UsersXXXXXAppDataRoamingUlead SystemsCorel VideoStudio Pro15.0en-US
But now, some of my plugins started to appear as duplicates. (See attachment)
With VS 11+ not running on XP Home I went to
[URL].......
to download the New Blue Cartoon filter. I Selected the Host Platform as Windows In the free effects set up box VS was already selected Destination folder was designated as prog files New blue free effects for windows.
In the New Blue Free Effects install Assist for VS box it said that the path would be to the vft.plug (via prog filesUL SystemsULVS11). In my VS11+ vft_plug folder-- New Blue Cartoonr,vtf files 131kb and date modified 26 06 2010 showed.
But the filter is not there in the filter library of VS.Did not show on reboot either.I was not asked to register.
I have a digital camera by Pentax called the Optio. It has one of the best features ever which lets you take a standard picture the go in to options and choose to filter out any color except shades of blue or shades of red or shades of green, thus everything else goes black and white. Can someone help figure out how to do that in photoshop?
View 1 Replies View RelatedI just want to CG my drawing, and usually the way I do this is by adding a filter called "Poster edges" to my drawing. I then spend a while cleaning up the drawing and making the poster edges look nice and styleized from there.
The problem is that filters from the filter gallery seem to only change the color to black. I really just want to change everything that gets "Poster edged" to a brownish color.
If I have a picture that is partly distorted by a color filter, is there any way I can negate the color distortion? For example, if I had a picture like this:
where I can use the sky or grass or bricks as reference points, how would I cancel out the color and make the whole picture look normal?
I used the Pinch filter function for barrel correction in GoPro video. Unfortunately it does not correct the whole pictures area: the corners remain untouched. Is there any real barrel correction (fish eye lens correction) filter available for Video Studio?
View 4 Replies View RelatedWhen I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.
View 7 Replies View RelatedI have a screen splited to 4 and a shoot is played in each one. I would like to put a Filter of Effect that will take one of this pieces and zoom it in till it will fill the complete screen. Just today I noticed a similar video in the Corels site where the introduce the VS X5.
View 1 Replies View Related