Selection Cycling: This feature is completely annoying!
I keep turning it off, and after a while, in the middle of a command, it turns it self on.
Is it a bug in the 2011 version?
How to turn it off for good?
When using selection cycling (which I think is brilliant, shame we didn't have it 15 years ago) with an xref attached the application slows right down to the point where moving the mouse results in the cross hairs jumping around and making using anything almost impossible. Turning the xref off or turning selection cycling off restores performance to how it should be. If both are on I just cannot use the program at all, shame really as this new feature is neat. I use x'refs extensively so this fault restricts use of the new feature.
I am running a Quad core 6600 intel processor
4gb Ram
Nvidia Quadro NVS 290
32 bit Windows Vista Business
I've noticed that with selection cycling, while it's handy to select multiple overlapping objects, you'd better be sure about what you're selecting first because there's no way to unselect (using selection cycling).
View 4 Replies View RelatedHaving problem with object selection when covered by other objects ie lines,arcs etc on a solid model---autocad 2011---did not seem to be a problem in 2006 version,but wondering if switching layers on and off is the only way?
View 9 Replies View RelatedI just upgraded to Autocad 2014.
With regards to selection cycling, when it's turned on, the dialog box pops up in the middle of my screen which is exactly where I DON'T want it as that's usually where I'm working and it causes all kinds of selection issues. Regardless of the settings I choose in the options, it comes up in the middle of my screen.
I've tried setting the position to static and then dragging the box to the side but on the next click, it pops up in the original centered location. I've also tried every possible configuration in the options box to stop this behavior.
I am trying to cut a person out of a picture with a deatiled background so I am using the quickmask selection and paint brush. I'm done selecting the person and have gone back into normal editing mode. I then inversed the selection created within quickmask to select everything but the person in the background. When I click delete, the background vanishes and the person become opaque.
View 3 Replies View RelatedWhy does this keep turning off? When I start up ACLT 2013, both boxes are checked. I just went to use the program again, didn't close the file even, and the boxes were unchecked, ie. nothing would highlight as I moved over them.
View 7 Replies View RelatedIs there a way of turning a selection into a path. I wanted to quickly select an solid colored object from a white background and then make a path around it. Can this be done in Photoshop CS2?
View 3 Replies View RelatedI am trying out 2012 and I keep noticing the selection brackets turning themselves on. Especially when toggling from wireframe back to shaded mode. I know about J hot key, but I don't feel like hitting f-3, J every time I toggle wireframe. Once I toggle something off, I expect it to stay off.. How to make this behave the way it used to ?
View 1 Replies View RelatedI recently just got Photoshop CS2 and there are some of the simpliest things that I cannot figure out. I use to have Photoshop Elements 4.0 and these things were easy as pie, oh well, hope you can help.
On CS2, I cannot find the selection brush tool anywhere! could someone tell me where it is located. Or if there is a better tool that has "replaced it" and does the same thing?
Also, when I move images into another "box" it isn't giving me the outline of the image where I can easily resize it and turn the image at an angle. Is there something I need to do to make it give me the outline [sorry, I dont know the actual word for what it is called]?
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
I just can't make it work.. I need to use QUICK SELECTION TOOL to select part of image and then cut it out and paste it exactly in the same place. But whenever I do it, that tool automatically add feather to the edge so I can't paste it in same place again!
I already turn on hardness to 100% and I don't see any other options I can alter to eliminate it.
I know that the (graphscr) command will change the focus of ACAD from the text window to the graphics screen, but is there a command line option to actually turn off the text window?
View 9 Replies View RelatedLast week I downloaded the Autodesk Design Review and for some reason I installed the DWG TrueView as well. Now, every time I open up a .dwg through explorer, True View overrules AutoCAD and thinks it has to be the one to open the file. Is there any way to turn this program off?
View 5 Replies View RelatedWhy is it that turning off Hardware Acceleration sometimes speed up a system or prevent it from crashing? This seems counterintuitive. What exactly works with AutoCAD by turning it off?
View 4 Replies View Related Autocad 2011
wondering if its possible to turn off lines inside of nested blocks.
When we tried to do this inside a heavily layered and blocked drawing, it seemed to make the file unresopnsive, unloadable, and general "autocad freezing" issues. We Reconsitituted the entire file from the ground up and found that by NOT turning off these lines inside of nested blocks (ceteris parabis) the file works fine.
We like to turn these lines off becuase different teams are working on different parts of the drawing and we like to focus on one section by turning the other off. Is this possible? Is there a better way to do this?
I'm trying to find an option to hide all constraints in a drawing, I am familiar with the toolbar option to turn display constraints on and off but my issue is that it's not a permanent toggle. Every time I change from a paper tab to the model tab or activate a viewport the constraint display is automatically turned on again and I must wait for the constraints and the drawing to generate. When playing checker I am frequently changing tabs or checking within a viewport, this is adding significant time required to check the drawing. I have not been able to locate a system variable or command to "freeze" the constraints until I want to see them again. an option to allow me to turn off constraint displays as I'm desiring or is this a Wish List item for R2014?
View 3 Replies View RelatedI have been working on a drawing and out of the blue, when I opened it the other day, all this tick marks where peppered all over the drawing. I discovered they were like point marks from dimension layers that were turned off. If I freeze the layer on top of turning it off, the tick marks do go away. I am running an old version of Autocad, 2007.
View 4 Replies View RelatedFor example, whenever you use the distance command it automatically turns the dynamic input back on. We have turned off the settings under drafting settings - dynamic input. I have also turned off the tooltips under options - display tab. Is there a patch or update?
View 3 Replies View RelatedI have a logo that is a jpg file Xref'd into a title block xref file. In my sheet files IMAGEFRAME and OLEFRAME are set to 0. They are set that way in the Title Block file as well. I still have some sheet files with these system variables set to 0 that still print the border around the logo.
View 9 Replies View RelatedIs there a way to get a white cursor to automatically change to black when hovering over white images or hatches that doesn't involve turning off hardware acceleration?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
How to stop the UCS from automatically turning to world when extruding a circle?
Example: If you start with a circle drawn to your set 3 point UCS the quadrants are in line with the X & Y but as soon as you extrude the circle into a cylinder the UCS turns the quadrants to world, I want the quadrants to stay in the same place as my 3 point UCS position.
Not sure if it's just a system variable that need changing.
I am running AutoCAD 2012 Electrical. The source wiring diagrams I am working with have attributed blocks all over the drawing. For my purposes, I dont need to export the data, but I do need to change the drawing. When I use "Burst" or "Explode Attributes to Text" in the Express Tools menu, it does change the attributes to text. However, it throws all the data that is in in the attribute all over the face of the drawing. This is extremely time consuming to delete them as some are micro small text.
I need a command that will explode the attributes to text, turning the blocks into entities, as if there are no blocks at all.
I often have lines drawn on top of other lines and need to cycle thru them to select the correct one. I always did this before upgrading to 2013 by holding the CTRL key and clicking on the lines. That doesn't seem to work on this version. I saw some recomenedations to hold the CTRL key and space bar at the same time but that still doesn't seem to work.It would be a huge time waste if I have to turn off layers everytime to just get to 1 line that I need to offset.
View 2 Replies View RelatedI have a problem fo cycling dependency when I try to do a notch in a particular case.
I have this frame sample. I need to notch each frame parts. I realize 3 notchs, first one between 1 and 2, second one between 3 and 4. This two notch are realized without any problem.
When I try to do the last notch between 5 and 6 I have a cycling dependency error message. I don't understand why and how to solve the problem.
Is there a macro or lisp file that allows you to click on a element in the xref or active file and turn it off?
View 5 Replies View RelatedWhat command turns off the annoying "selection dialog box"? I don't know if it's new or not, but it started showing up this week. I see the purpose, but don't like it or the fact that autocad makes difficult to turn off a feature after it puts it there without warning. Attached is a screen shot of it.
View 2 Replies View RelatedWhen selecting objects in AutoCAD a 3d style USC icon shows up on the object about the centerpoint of the object or objects.
View 5 Replies View RelatedI know in Photoshop you are able to cycle through hidden tools not visible in toolbar by pressing SHIFT together with the keyboard shortcut repeatedly. I don't see this behaviour in Illustrator - is this correct? Is there any way to replicate this behaviour without allocating a different shortcut for every tool in the toolbox?
View 4 Replies View RelatedI cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.
every time I select something a small box pops up in my way with the object's properties. I can't figure out how it became turned on, and don't know how to get rid of it.
View 4 Replies View Related