AutoCAD 2010 :: Explode Attributes To Text - Turning Blocks Into Entities
Jul 27, 2012
I am running AutoCAD 2012 Electrical. The source wiring diagrams I am working with have attributed blocks all over the drawing. For my purposes, I dont need to export the data, but I do need to change the drawing. When I use "Burst" or "Explode Attributes to Text" in the Express Tools menu, it does change the attributes to text. However, it throws all the data that is in in the attribute all over the face of the drawing. This is extremely time consuming to delete them as some are micro small text.
I need a command that will explode the attributes to text, turning the blocks into entities, as if there are no blocks at all.
View 2 Replies
ADVERTISEMENT
Feb 7, 2012
I wrote this little piece of code (attached) that explode all the blocks in the current drawing.This is magical, compared with what we had to do in VBA.
This works perfectly but now I want to go deeper and managed blockreferences with attributes.Based on my code, I can determine if oBTR.HasAttributeDefinitions is true or false.
If the blockreference has attributes, I suppose I will have to use Explode instead of ExplodeToOwnerSpace.
My first question is, using explode, I need before to know in which space the blockreference is inserted (Model or any layout) so to insert the exploded entities correctly. So, is it possible from a blockreference to get its own SpaceId?
An another idea I had is to edit the blockreference (not the block definition) to replace attributes with text...
View 6 Replies
View Related
Feb 1, 2012
is there BURST command or something similar for AutoCAD 2004 ? I need to explode blocks without losing text content
View 3 Replies
View Related
May 30, 2013
Autocad 2011
wondering if its possible to turn off lines inside of nested blocks.
When we tried to do this inside a heavily layered and blocked drawing, it seemed to make the file unresopnsive, unloadable, and general "autocad freezing" issues. We Reconsitituted the entire file from the ground up and found that by NOT turning off these lines inside of nested blocks (ceteris parabis) the file works fine.
We like to turn these lines off becuase different teams are working on different parts of the drawing and we like to focus on one section by turning the other off. Is this possible? Is there a better way to do this?
View 3 Replies
View Related
Mar 20, 2012
I'm working on creating some blocks for our office. Basically it is a simple block with a few lines that remain and then a couple attributes you can click on and change. I have added the attribute and all is working well.
My only issue is I would like to make the text in the attributes to be bold. For some reason I can't see to do this. Is it not possible.
Basically I want to try and get some of the attributes to stand out more than others. I tried changing the color and the lineweight of the attibute (which worked the color is different) but when it prints it doesn't change at all.
View 2 Replies
View Related
Apr 12, 2012
I have a large amount of P&ID drawings that have blocks with attributes. One of the blocks is missing an attribute field that I need so I recreated the block using the same name and added the missing attribute. When I reinsert the block and say "yes" to updating the block's definition within one of my P&ID drawings everything seems fine except when I try to edit the block to fill in that field.
The newly added attribute doesn't show up but when I right click one of these blocks and select Block Editor the new attribute field does shows up so the redefine did work I just can't use that attribute. Is this a bug in AutoCAD? How I can use this attribute?
View 2 Replies
View Related
Jul 17, 2012
How could i explode text
I want to explode text in a particular font and then extrude
[URL]
View 1 Replies
View Related
Aug 2, 2013
I am designing a solar field and have my solar panels laid out in a grid. I have each panel represented as a block with 4 attributes: Column, Row, Module Type, and Combiner Box. There are ~5,000 panels so it will take forever to modify the attributes of each block individually. Is there a way I can select multiple blocks (an entire column for instance) and set the "Column" attribute for ALL of those blocks to the appropriate value?
My end goal is to be able to export the information in those blocks to excel. So if there is any way to tie 4 pieces of information to an object and export it into excel not using block attributes, that would work for me as well.
I attempted to use Lee Mac's Batch Attribute Editor BAtteV1-4.lsp and it was very close to what I needed. But it will modify the specified attribute of all blocks within a drawing, whereas I only want to modify the attributes of all blocks within a selection.
View 3 Replies
View Related
Jun 18, 2013
I am using AutoCAD 2012 (Electrical). I have a few blocks that I pasted in a drawing with text that is contained in attributes.
I would like to explode these blocks so that I can make some changes to them, but when I do this, I lose the text that is contained in the attributes. After exploding the blocks, I just see the attribute names rather than the text that they originally contained.
I hate to have to re-type all this info. If I could somehow choose to choose to convert the text originally contained in attributes to plain old static text, that would be perfect for me.
View 4 Replies
View Related
Feb 6, 2012
I'll try to import a text file with a string: pointnumber, easting, northing, elevation, discription, but I get very big blocks and attributes in my drawing. I use Autocad 2011 Map 3D, on a windows XP OS. I'll importing the text string with the import command. Easting and Northing are for the position. The Elevation, pointnumber and discription are attributes from a block. I can only choose a block: "Map_Survey_point" This is the only block I can choose. When I import the text, the scale from the importing blocks are too big. How can I change the size of the block and attributes?
View 4 Replies
View Related
May 10, 2012
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
View 4 Replies
View Related
Oct 31, 2011
Any method to export text to excel such that the text is editable within excel?
I have a column of text (each text line is an individual mtext entity) and I would like them to appear in a column format in excel where each mtext entity has it's own cell.
View 6 Replies
View Related
Nov 21, 2013
Is it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies
View Related
Feb 13, 2011
I have a CAD file with property parcels in it. It has come from an external contractor and from a GIS program of sort sort I believe.
If you click each 'boundary'/land piece, it is a block/object (not a proxy graphic) and in the properties pane window, there are attributes that has the lot number, the lot area, parcel number, other info etc in it.
Each block is irregular and different, i.e. they are not all the same rectangle block repopulated, they are different blocks.
I don't know much about attributes in AutoCad althoguh after reading about them, is there some way to edit an attribute (make it not 'invisible' and to increase the text size of its display) when it is already in several hundred different blocks? The only way I could work out how to do it was to go into every block and do it.
I also tried using the ATTSYNC command to update blocks with attributes although that requires me to individually select each block/give each blocks name.
I also tried using the DATA EXTRACTION wizard and was able to extract the attributes into a table/excel file, although that is not really good enough as I need the attributes displayed over the CAD data so you can see what parcel of land the attributes are referring to.
Any better way or a lisp command to do this? Clicking each block/boundary/land unit to place a label over it would also be okay. I just don't want to have to manually create the labels from reading the property pane, there must surely be a better way,
View 9 Replies
View Related
Jan 30, 2014
I was curious to know if it is possible to flip the orientation of an attribute when using a mirror parameter. I would like to orient my text to the right when I flip it one way and to the left when I flip it the other way.
View 0 Replies
View Related
Aug 4, 2009
I made what seems to be a very simple dynamic block with text attributes and a few grips attached to stretch and polar stretch actions, but the file size is about 2mb! This is huge... roughly the size of one of our firm's full floor plans. There seems to be nothing purgeable in the file, so I am wondering if this is just the size necessary for the functionality or if I am bloating this somehow.
View 5 Replies
View Related
Jun 22, 2010
I have a .dwg file which contains numerous blocks (70 or so) and they all have unique names.All these blocks have nested text.
I want to edit the attributes of all the text, in all these blocks, such that they assume the same text style, text layer and colour.
Obviously, with so many blocks, I want to avoid clicking on the text and editing the attributes individually.
I tried a lisp file called ATcolour.lisp, but even this is very time consuming.
View 4 Replies
View Related
Apr 26, 2012
how to make make block attributes text visible next to my blocks?
View 4 Replies
View Related
Sep 26, 2011
I know that the (graphscr) command will change the focus of ACAD from the text window to the graphics screen, but is there a command line option to actually turn off the text window?
View 9 Replies
View Related
Jun 25, 2013
What do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
View 5 Replies
View Related
Apr 4, 2013
I need a lisp code to burst all "blocks with text/attributes inside" in selected area. That means user should select an area (window selection) and lisp program should be find all blocks with TEXT or ATTRIB inside in selected area and then applys "BURST express tools" command to all these blocks in the selected area by user.
View 9 Replies
View Related
Jul 20, 2012
Say I have a block which contains just a line inside. I overruled that block to show a circle. I have this overruled explode class, so whenever user at command pormpt explode that entity it would be exploded as a circle.
My problem is when I explode the block within code ( Myblockref.Eplode(dbobjects) ) . it will bring the line.
View 9 Replies
View Related
Jun 21, 2012
After working several hours on a drawing with many attribute blocks, all the text in all the attributes disappeared. Block outline remains as defined but text is gone. Have been using this version (Autocad 2012) about five months and this is the first episode. how can I get the blocks to appear as originally drawn?
View 6 Replies
View Related
Feb 22, 2012
In my title block I have a attribute with the name project_Number. Now what I want to do is the following. When I edit my block with the project number. The project number should automatically be added to a text box without me typing in the project number twice.
E.g.. This Drawing is part of the consulting services provided for Project[Project_Number] and may not be used or applied for any other purpose without prior consultation.
in other word the project number should be reference in the text box from the attribute.
View 6 Replies
View Related
Jan 19, 2012
I have a block of a survey from an outside company which was sent as a block.I am guessing that when it was creating, they un-checked the box that allows it to be exploded.
I would like to edit the block, and without being able to explode it, I have to go into the block editor to do so.Is there a way in block manager to change it so that I can explode the block?
View 5 Replies
View Related
May 7, 2012
I working with a LISP program which creates some assembly drawings on the fly. For certain parts of the drawing I INSERT other dwg files which of course become blocks. Once in the drawing the users are sometimes wanting to edit the drawings where the blocks are, which makes an explodeable block necessary. But since the drawings are not actually blocks until they are imported this is not an easy thing to resolve. The other thing to keep in mind is that this drawing process is completely automated. The user does not get a chance to interface with it until the drawing is complete. So asking the user to do something as the drawing is being created will not work.
View 4 Replies
View Related
May 2, 2013
Is there a way to do this within 2012 or would I need to use a script?
View 6 Replies
View Related
Jul 13, 2012
Is it possible in ACA2011 to explode a block, but control what layer the pieces go to?
I have a block for a closet rod and shelf , but it always has to be re-sized once in the drawing so i must explode it. since it was made on layer 0 it explodes to that layer and I have to change the items to the proper layer.
View 9 Replies
View Related
Dec 2, 2007
with word EXPLODE i don't meen the explode command. To brake appart part (block or solid).
But i would like to "explode" all parts (blocks or solids) appart and move eatch of them some disstance appart from enother for presentation purposes and then join them together if i would like again with a command to return to original place.
Any way to do that automaticly with a command in Autocad 2008?
View 9 Replies
View Related
Aug 14, 2013
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies
View Related
Nov 16, 2012
I have a drawing template (block) where the drawing number is displayed in two locations (attributes). The same value has to be entered in both attributes.
Is there any way of "echoing" the data from one attribute to other attributes (or text objects)?
View 2 Replies
View Related
