I created a jigsaw puzzle from an image. All the pieces exist in different layer.
Is there a way to get the position of the pieces (a script or a menu command)? I realize I could use the ruler, however, I would like something that would be more exact and less tedious.
I have a question with batch crop. I have about 300 images of same dimension and would like crop to specific position in all of them. In photoshop, I would import all the images as a layer and crop a layer, then export the layer as an individual file.
View 1 Replies View RelatedI want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
I like to work in fullscreen mode (press F once). I like it that I can pan the position of the image around (holding the space bar), but it is very annoying that when I cycle through the opened images using cmd-< the default position of the image is used again... very annoying, so I have to re-position the image again and again...
View 3 Replies View RelatedSituation Basically I have a series of 8-bit bitmap images which all use different palettes but have around 64 colors in common.
This will allow them to be combined with another graphic which uses only those 64 colors in a 3D engine, thereby allowing that graphic to be used with the images with no color misassignments.
I need to be able to set those 64 colors to the same position in the colormap for each image. I could just limit the images to 192 colors, but the loss of information is unacceptable to me.
The task I'd like to manually drag those specific colors to the bottom of the colormap in a set order, but the "Rearrange Colormap" dialogue does not show me what their RGB values are, so there is too much room for error. (Tried in Gimp-2.6 and 2.8)
I'm creating a sprite sheet and I need to move my sprites to a specific location.
For example my sprite is 120x120, so I need to place the 5th animated frame at EXACTLY 120x5=600 pixels from zero or at 600, 0. I can't seem to find a way of doing this in GIMP, it shows me a mouse delta position from where I first clicked?
When I import JPG images from my digital camera Gimp assumes that they are 72 x 72 DPI. Is there a way to set this default to be 600 x 600 without manually adjusting it each time using "scale image"?
I use Gimp to print the images.
Gimp 2.6.11 on Salix Linux.
I'm a new user of GIMP. I have scanned a line plan that I need to modify in a series of multiple scans (plan is too large to scan in one image) and I need to recombine the multiple files back into one seamless image.
How does one accomplish this?
I want to join 2 images together to make a bigger image, the easiest way to explain it is, say 1 image is 10cm x 5cm and the other is 18cm X 7cm and I want to put both together to make a new image 14cm X 10cm. They need resizing too.
Image A
Image B
Join (NOT merge) them like this;
A
B
I have been successfully printing images from CS3 on an Epson 3880. Now that I have had to upgrade to CS6, I have a big problem. In CS3 When I went Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider down to brighten the image. I can't find Output in CS6! Since choosing Photoshop Manages Colors turns off the printer's color etc controls,
View 2 Replies View RelatedIs there any way I can scale images down in size, whilst keeping the quality of the image? I am a Media teacher having to use this software with the class and they must have high production values for their controlled assessment. However, I do not know how to get around the problem that all the work is predominantly blurred because students have scaled down the pictures resulting in horrendous blurring.
View 3 Replies View RelatedI didn't find a way to know the position (x, y) of a layer. I found the dimensions of a layer but not the position. Gimp knows that bacause when I open a file the layers are positioned but I can't find a way to know the layer's position, also with a script.
View 1 Replies View RelatedThis is not a YUV headroom issue just to be clear and Im not looking at a broadcast output. Using my Eizo monitor with smoke I just did a color correction and exported a prores 422 hq with and with out yuv headroom. What Im noticing is that the color of the image in the smokes viewer is more saturated than the output which is being viewd in qt 7 and whatever the other qt is. Im not talking fine details here, Im talking about whoa whats going on with this isnt remotley close to being in the same ballpark. In short when I tab over to the qt file and shrink it and place it side by side by what is in the smokes viewer they do not match on the same monitor.
View 3 Replies View RelatedPSE10 in Windows 7 environment. Slideshow original images are stored on external drive
I successfully output a short slideshow to .wmv. When I tried to repeat the output a number of images were missing, these were photos input as graphics direct from files on the external drive. At first it was only two specific images but later attempts others were missing. I even tried changing an image in one of the effected slides and the same problem arose
Over the course of the attempts I received the following error messages:-
I have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
how to remove the remembered zoom location from an image like it is when you first import it into LR?
I would need a function to sort images based on GPS position, north to south or vest to east. Is that possible or an function that will come in the future.
View 1 Replies View RelatedUsing:
TB-5300 Slimline Design Tablet
Windows 7 (32 and 64 bit, problem occurs on both)
The problem I am having is that the X-coordinate for my pen tablet is incorrect. The paint brush appears to the left of the screen and doesn't move as far left/right as my pen does. By moving the position of the drawing area I have found that pressure works correctly. Strangely, the position of the mouse when being controlled by the pen tablet is correct, it's just the paint brush which is wrong.
I can correct this problem by uninstalling the pen tablets drivers, but then the pressure sensitivity stops working.
This problem fixed itself for about a few days, but then came back without anything apparently having changed in that time.
It's occuring in both a 32 and 64 bit version of windows.
[URL]
I am making a holiday greeting card. I have 16 very larged photo images "linked" (not embedded) into the card. The original images are very large (e.g. 4500 x 3000 px, 10mb) but I've placed them fairly small in the final card (only about 2" x 2" printed). Therefore, I likely don't need the full resolution of the original photos. I need to generate a final file that I can send to an online print shop, something that is ideally 10-25Mb in size, probably pdf. How to prepare the final file for export to pdf to generate as such? Right now, the final file is 275Mb because it is embedding the full size of each of the 16 images.
I'm on Illustrator CS6 on Mac.
Where the output of (display ...) in a script goes when running in batch mode?
View 1 Replies View RelatedGIMP 2.6.10-1 on Debian 6 does not open JPEG files recently written by itself. The program freezes and the only way out is to reboot. Older JPEG files are opened as usual, and the problem files can be opened in Digikam and Fotoxx. A sample problem file is attached.
View 14 Replies View RelatedI am a relatively new user of Corel Draw. When using the variable data print feature, the images seen in the print preview look correct, but when the page is printed the same data is output in all 4 images. This does not happen every time. I suspect there is something going wrong with the print merge data buffer. I have not been able to reproduce the error. I have created a detailed script to for others to follow when running this job.
View 7 Replies View RelatedIs there a way to find out the position of a layer after you move it from the starting point of 0,0 and 0 rotation?
I'm trying to line-up two images and the bottom layer is the reference image so I move the top layer in the x,y direction and rotate the layer until it looks good. But instead of saving I want the new x,y location along with the rotation number to enter into an Imagemagik bash script.
I'm using GIMP 2.6.11, but will update to 2.8 if necessary.
Is there a way to find out the position of a layer after you move it from the starting point of 0,0 and 0 rotation?
I'm trying to line-up two images and the bottom layer is the reference image so I move the top layer in the x,y direction and rotate the layer until it looks good. But instead of saving I want the new x,y location along with the rotation number to enter into an Imagemagik bash script.
I'm using GIMP 2.6.11, but will update to 2.8 if necessary.
I would like to obtain a black and white image of a photograph of a book page.
My attempt to do this is by running the threshold function over theentire image. This appears to give the desired result, but onlylocally. It appears that the optimum parameters of the thresholdfunction vary by position (i.e., according to some scalar field), withone extreme in the center of the glare and then radiating outward. Sojust running the threshold function over the entire image withconstant parameters always gives sub-optimum contrast for 75% of theimage. Will I have to find a way to run the threshold function withnon-constant parameters, or is there some other tool to do the job?
os windows 7, upgraded to Gimp 2.8.4 I open an .xcf file and go to single window mode. everthing looks ok the zero offsets on the rulers are where they should be and I can see the bottom of the gimp window where the % size change is. I then ask for a new tool bar which is provided and locked to the widow. if i go to full screen and then back the picture is pushed down as are the ruler zero's and i now can't get to the bottom of the screen. this annoying behavior does not seem to happen in multi window mode. attached is a screen capture.
View 4 Replies View RelatedAbout once a year I ask about a capability to output a file fromGimp in pdf format and the CMYK color model. In addition it would benice if this output was in the PDF X/1-a:2001 format, to satisfycertain fussy printers. I know there are external converters likeImageMagick. It would however be nice if after all these years Gimpcatered to the needs of the printing industry.
View 4 Replies View RelatedOn Windows 7 Home Premium x64, GIMP does not properly restore the position of the Toolbox window with "Save window positions on exit" checked in Preferences > Window Management. The Toolbox window does retain its size, but is placed in a seemingly random place in the top-left area of the screen every time GIMP is launched. Other windows retain their size and shape perfectly. I've searched for a solution to this problem but couldn't find one.
View 2 Replies View RelatedRecently upgraded to Gimp 2.8 for the single window mode (which worksbrilliantly in Ubuntu, especially with the HUD).
But the Rectangle Select Tool has a new - but odd - behaviour. When I drawa selection, and then add to that selection, a new "square" is position atmy cursor. (See attached screenshot.) This didn't happen in 2.6 and is abit irritating because it disorientates me slightly, especially if I'mworking quickly.
Is there a way to turn that off (or revert it to the 2.6 way)?
I have just bought Elements 12. Great programme. I used to use Picasa 3, a good free programme. In Picasa it is easy to move images around in their folders by simply click, drag and drop. This does not work in elements. Is it possible to achieve this somehow?
View 1 Replies View RelatedI am going to get some flack but I bought a template to work with in psd format. I was told that I could jut open it in photoshop, make the changes to the layers, save it using the "save for the web" feature, and it would output the seperate images into an images folder that I could use in relation to my HTML pages. HOWEVER, I am just getting one huge pictures!
View 3 Replies View RelatedWhen I run Image Processor, I tell the files to go to a specific folder. All of the processed images go to a folder named JPEG in the folder I specified. But, it also creates another copy of each image on my desktop which means a lot of cleanup after running 100 images. Anybody know how to stop that?
View 3 Replies View Related