When I import JPG images from my digital camera Gimp assumes that they are 72 x 72 DPI. Is there a way to set this default to be 600 x 600 without manually adjusting it each time using "scale image"?
I use Gimp to print the images.
Gimp 2.6.11 on Salix Linux.
I have 20 images for a animation I would like to make. I don't want to make a Gif animation, but a PNG animation with Jquery. I need a file like this one: [URL]
How can I import all the 20 images and place them among each other?
I heard many good things about Gimp so I downloaded it, eager to begin editing my photos. But for the last 30 minutes, I have been unable to even upload an image to begin editing. I've tried everything, but no matter what, my images will not "drag and drop" like they're supposed to. I am getting more and more frustrated by the second. I read it might be the fact that it's a "jpg" file,so I tried renaming it, as suggested, still, no luck! I'm using a Mac Os X 10.6.8
View 1 Replies View RelatedHow can you do this? I generally create images of a different size than that so it would be really useful to be able to change it.
View 3 Replies View RelatedI just installed Gimp on a few of our machines at work, the main reason being to allow users to import images from our network scanner and manipulate them etc...
If we scan several pages at once and import them in Gimp, only 1 page is imported. Once this is saved and closed, we then have to go through the whole process of File > Acquire etc. again, for each page scanned. (We use Fuji-Xerox mailbox scanner utility).
With Photoshop, when importing multiple pages from the scanner, all pages are imported to the main program at once.Is there any way to acheive this in Gimp? It's the only real problem we have with it.
I want to write a script that will import images from a directory and then place each image into its own layer.
View 1 Replies View Relatedi am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
I recently upgraded my laptops to Fedora 17 and Linux Mint 13, which now come with Gimp 2.8. After discovering that Save and Save as are moved to Export to and Export, I tried saving the default export settings for JPG. I usually set the Quality to 80 and make some other adjustments. However, the defaults always revert back no matter how many times I press the Save Defaults button.
Also, is there any way to make Gimp always use the previously selected settings? It seems that even though I set the defaults, with some images I open, edit and attempt to export, it tries to adjust the quality settings again. I just want to always have the defaults I have set for exporting jpg files without having to click an extra button or keyboard shortcut every time I save a file.
Why can't I open my images in iPhoto to import photos to work with? I tried dragging them in, and I tried opening my iPhoto from the Gimp importer window, nothing seems to work.
View 5 Replies View RelatedI have 2 images.
I need to put them both in the same photoshop image.
How do I import an image INTO Gimp? I realize I apparently can't scan into it, but how do I get my images to open IN it?
View 1 Replies View RelatedImport .svg file into gimp.. Image size 1024x1024 and smaller produces aliasing.
View 7 Replies View RelatedBefore downloading GIMP I just want to double check that I can import a satellite image, in pdf or jpeg format, as a background which I can draw over with all the available tools.
I also would like to use a grid over the drawing for scale.
I'm a new user of GIMP. I have scanned a line plan that I need to modify in a series of multiple scans (plan is too large to scan in one image) and I need to recombine the multiple files back into one seamless image.
How does one accomplish this?
I created a jigsaw puzzle from an image. All the pieces exist in different layer.
Is there a way to get the position of the pieces (a script or a menu command)? I realize I could use the ruler, however, I would like something that would be more exact and less tedious.
I want to join 2 images together to make a bigger image, the easiest way to explain it is, say 1 image is 10cm x 5cm and the other is 18cm X 7cm and I want to put both together to make a new image 14cm X 10cm. They need resizing too.
Image A
Image B
Join (NOT merge) them like this;
A
B
Is there any way I can scale images down in size, whilst keeping the quality of the image? I am a Media teacher having to use this software with the class and they must have high production values for their controlled assessment. However, I do not know how to get around the problem that all the work is predominantly blurred because students have scaled down the pictures resulting in horrendous blurring.
View 3 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedLightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
I want to generate a single image which compares two different images side by side. Can Gimp do this?
There was a tab called "new" which enabled me to generate the white background needed to do the merging. One of those little details the author forgot to mention. They just said " Open the first image as a new layer and move it to the left" without mentioning that you had to find the "new" key and put in the white background first!
How would one set up a default import location, such as a directory below "My Pictures" or a flash drive? I don't see a way to create a macro or a preset that would step straight into a directory holding new images. In Windows, there are about six or eight levels from the top of the hierarchy to a location below My Pictures. There should be a way to automate the source location.
View 1 Replies View RelatedI am using Lightroom 4. I changed my import settings to a preset location. Is there a way to make that my default setting so I do not have to select it each time that I import?
View 2 Replies View RelatedI am using Map 3D 2010/Civil 3D2010/AutoCad 2010. Is there a way to change the default settings in the Map Import dialog box? I want to "Create Object Data" and "Import Polygons as Closed Polylines" with every shp file I import. It would be nice if I could have these parameters selected by default instead of having to check them both with every shp file I import. Is this possible?
View 1 Replies View RelatedCould we have a more definitive way to establish personal defaults for IMPORT.
When I import from my camera card, I normally start in the Folder sub-panel of Library and do a right-click "Create a new folder inside ..." and then after that is completed I select the folder just created and right click again and "Import to this folder ..."
This brings up IMPORT with my destination already visually established AND the folder already created within my folder structure and then all I need to do is quickly verify my options and click IMPORT in the lower right corner.
But for the life of me, I couldn't get my options to be sticky ... e.g. preview resolution, destination, etc. I'd set them, do the IMPORT as above, finish it and when I'd go back in they wouldn't have been left the way I set them. But I knew that sometimes this DID happen.
Turns out that if you invoke IMPORT via the button in the lower left corner of Library and complete the sequence (rather than import to this folder via a right-click) ... then options set from that initiation point are sticky and are rembered the next time you go in.
My question is: could we not have a more specific way of saving the defaults on the screen so no matter how you entered IMPORT, you can establish your default and 'lock' it.
Right now my default import location is pointing to my c drive and I need it to go to my E drive
View 2 Replies View RelatedI'm running LR3.5 on OSx10.5.8 and recently I've lost the ability to import new photos (from hdd). My default catalog (so far I've been using only one) contains appx.33k photos and I can't import new shots. Yesterday I was shooting tethered camera and everything went fine. Today I wanted to import new files (from hdd) and noticed that "import button" is completly inactive. Dead. I set up a new catalog and managed to process todays photos but when I'm switching to previous catalog the "import" button is still dead.
View 9 Replies View RelatedI want to import default templates (Title Blocks) with in Auto cad. Is there any option ? How to proceed?
View 3 Replies View RelatedI am trying to change my default import location on my MAC Pro Tower, to one of the internal HD's. I have named the HD Photo Location, and have created a folder in it called it "My Lightroom Photos". I have been able to create this, but cannot seem to ber able to make it my default when I open LR 3.5. I have to manually go in and change it. Is there a way that this can be changed to make it my default?
View 4 Replies View Related