Photoshop :: Jittery Cursor Vibrates Very Fast - CS6 / CC?

Oct 29, 2013

The best way to describe it is that the cursor vibrates very fast in some circumstances, especially when using the Brush tool and adjusting its size using Cmd + Alt + Drag, as well as pressing Alt to sample a color when using the Brush tool. The issue does not happen when using the eyedropper tool.
 
Video:
 
This has been around in both Photoshop CS6 and CC, on both OS X Mountain Lion and Mavericks. I have reproduced the bug on both my Late 2008 MacBook Pro using a Wacom Bamboo Fun, a Wacom Intuos 4 and a Wacom Intuos 5 (all with latest drivers) and same with four new iMacs running both Mountain Lion and Mavericks. It does not happen with a mouse. It cannot be interference, as I can always reliably reproduce this is three separate cities around the world.
 
If the Wacom tablet was sending jittery coordinates to the computer, then surely the mouse cursor would also vibrate, or at least the Eyedropper tool would exhibit the same bug that the Brush tool while pressing Alt to color sample does.
 
To test it, please use a Wacom pen and try adjusting the brush size using Cmd + Alt + Drag, as well as using the brush tool and pressing Alt to sample a color (preferably on a photo or noise so that you can clearly see the difference between various pixels and colors. Be sure to not be zoomed in too much, try zooming to 100% or less, otherwise the pixels are too far from each other for the jitter to make a difference.

View 2 Replies


ADVERTISEMENT

Photoshop :: SC6 Jittery Cursor In Layers Pallet

Aug 17, 2012

I have all my pallets on my second display. In Photoshop CS6, when I open or close a layer group folder in the Layers pallet, the cursor becomes jittery and stuttered. If I move the mouse off the pallet, the mouse returns to normal, and mouse tracking is smooth.

If I move the mouse back over the Layers pallet, it's fine, until I interact with a layer on that pallet. At which point, the jittery mouse action returns. I know this wasn't an issue with CS5, but I also recently upgraded to Mountain Lion, so it's possible it's a Mountain Lion/PS6 quirk.

View 3 Replies View Related

Illustrator :: Cursor Flashing Extremely Fast In Input Fields

Jan 8, 2014

Since a few versions (I have Illustrator CC), my cursor in Illustrator input fields flashes extremely fast when i drag the cursor over such field. This could be a regular text input field or anything similar where you can type in something or adjust a value by clicking and dragging.
 
What happens is that the cursor changes to the Illustrator cursor and then back to the Windows arrow cursor in an extremely fast manner. It happens so fast, that it completely slows down the mouse interaction and the cursor movement lags behind my interaction.
 
I have Win 7 x64 with the newest display drivers. This problem occurs only in Illustrator and Flash.

View 7 Replies View Related

AutoDesk Smoke :: No Fast Forward Or Fast Rewind In The Timeline?

Jun 14, 2012

Or is there no fast forward or fast rewind in the timeline. Like double tapping the "L" key or something in other programs...

Editor of things...

View 4 Replies View Related

GIMP :: Jittery Brush And Jaggies

Jan 22, 2014

How would I go about to fix this "jittery" brush in gimp? [URL] ......

This is simply a 1 pixel paintbrush with the normal brush (circular one with a little bit of smoothing).

View 2 Replies View Related

VideoStudio :: X5 Plays AVI Jittery After Upgrade To Windows 8

Nov 11, 2012

After upgrading from W7 to W8 only VS X5 plays .avi videos with a jitter, other software doesn't (Powerdirector, Windows Media Players etc).

View 4 Replies View Related

VideoStudio :: X3 Multi-trim Video 1080p Jittery?

Jan 13, 2011

I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.

View 1 Replies View Related

Photoshop :: How To Do A Fast Preview While Texturing

Aug 13, 2012

I saw a video of some guy making a texture for a 3d model in photoshop and time to time he switched to a window where he could see and manipulate the 3d model with the unfinished texture and no, he didn't save the project and apply it everytime. I was wondering if that was a plug-in or something like that.

View 2 Replies View Related

Photoshop :: PNG For A WEB - None / Fast Or Smallest / Slow?

Oct 15, 2013

I need to do for a WEB many PNG icons (aprox. 70x70 pixels e/a). There will be like 20 of them loaded in the WEB at the same time. which kind of compression I should pick when I save as a PNG: "None/Fast" or "Smallest/Slow", and "Interlaced" or notMy main concern is that the WEB page should load them the fastest possible. 

View 3 Replies View Related

Photoshop :: How Do I Remove Backgrounds Fast?

Feb 23, 2008

I have some images lots of them(like over 200) and I want the fastest easiest way to remove the background and keep the look of the text(ie nothing gets lost from it).

I am going to save them as transparent gifs but like I said I don't know how to do them very fast.

They all are black on white:

View 3 Replies View Related

Photoshop :: CS So Slow On A Fast Hardware!

Feb 23, 2004

I rcently installed PS CS on my Dell Inspiron 8500 notebook, a P4 2.6GHz, 1GB RAM, 64Mb GeForce 4 4200 (15.4" WUXGA+ 1680x1050), Hitachi 60GB 7,200rpm disk, DVD+RW and it so unbelievably slow. I cannot even do a simple Elliptical Marquee without having to wait ages (a lot of disk I/O activity). The settings of CS are at default. It's completely put me off this software-am I missing something here?

View 3 Replies View Related

GIMP :: Flashing Cursor / No Movement Of Cursor

Dec 14, 2012

My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.

Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.

I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.

For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none

In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.

OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"

Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)

View 3 Replies View Related

Photoshop :: Fast Selection Of Ruler Tool?

Oct 15, 2012

I often use the ruler tool. Its located below the eyedropper tools.

How can I bring up this tool to select it with one fast click - instead of long clicking at the eyedropper to wait the popping up the (sub)tools.

The shortcut "I" only selects the first of the tools.

View 3 Replies View Related

Photoshop :: Changing Brush Settings Fast

Feb 15, 2013

How to control the angle and roundness without having to constantly do it within the panel.

View 2 Replies View Related

Photoshop :: Fast And Easy To Load ALL Brushes?

Nov 11, 2004

is there a fast and easy to load ALL brushes? or must you go one by one?

View 3 Replies View Related

Photoshop :: What Settings Best Set For System To Move Fast Enough In CS6 Extended

May 21, 2012

.I'm trying to figure out if I have my preferences set up in Photoshop set up correctly...I have 18 GB of RAM and my smudge tool isnt responding fast enough, its laggin and sluggish.  Here's my system:

Dell Precision 690
Xenon Quad Core 8GHrtz
Geforce 560 Ti 1GB card
18GB RAM..
plenty of HD space in the TBs...
 
I am particularly trying to find out what settings I can best set for my system to move fast enough in Photoshop CS6 Extended....Prefs>Performace> 

View 4 Replies View Related

Photoshop :: Slow Down On A Fast Machine - Clueless On Settings

Jul 21, 2004

Photoshop and system optimization

I am curious if anyone here knows how to really optimize the performance of photoshop CS. I am not getting very good performance, but I don’t know what is wrong. I am a pretty savvy user, so I can set settings and understand whatever I need to, I am just ignorant right now of what photoshop needs to really run at it’s best.

My system and setup is such:
-2.8 p4 hyperthreading
-2 gigs 400mhz pc3200 ram
-serial ATA C: drive, 80 gig
-serial ATA D: drive, 80 gig
-120 gig IDE partitioned, S: (10 gig scratch disk) and T: (110 gig storage)
-128meg Geforce 4 ti…

That is the basic setup of my performance parts. Everything is defragged and the computer runs fine.

My windows settings are:
-Processor Scheduling set to Programs
-Memory Usage set to System Cache
-one page file, set to the C: drive, 2000-3000 MB

My photoshop settings are:
-First Scratch is set to the S: drive (10 gig partition)
-Second scratch is set to the D: drive
-Cache Levels are at 8
-Available RAM is 86% = 1528mb

That is the basic setup.

Here is my problem – photoshop runs pretty clunky For instance, I just opened up a 2.17 meg image, first image of the day to be opened. Immediately my scratch indicator in the status bar reads “Scr: 1.91G/1.44G” and the actual file on the S: drive is 1.93 gigabytes. Also, the photoshop efficiency is at 24%. This is all without having done ANYTHING in photoshop so far. I opened the program, opened a 2 meg file, and those are the results I get.

It typically just gets worse from there. I’ll get major slowdowns, my efficiency will drop to 4 or 3%, the Scratch indicator will sometimes read “Scr: 2.31G/1.44G” or worse. Sometimes photoshop locks up for about 20 seconds or more, the title bars all go white like it’s not responding, and then comes back.

So I am at a loss. I have the hard drives, ram, and CPU for photoshop CS to run fast, right? I don’t see what it isn’t, unless I have something totally set to reduce performance in my swap file or scratches or something.

View 1 Replies View Related

Photoshop :: Hard Drive Space Going Mega Fast!

Apr 30, 2005

I have 2 hd`s one 160gb and one 15gb. my 15gb is down to just 98mb again. last week I cleard space for an extra 3gb and just a week later its down to 98mb again! Is windows saving files without me knowing? I only save work on my 160gb.

View 1 Replies View Related

Illustrator SDK :: How To Convert CUR Cursor To Mac Cursor

Feb 27, 2014

In Xcode, we have to define cursor as:
 
resource 'CURS' (16001) {
    $"00 00 00 00"
    $"18 00 3C 00"
    $"1E 00 0F 00"
    $"07 80 03 C8"
    $"01 E8 00 FC"

[Code]...
 
In Windows we use .cur file, simpler.
 
I want to convert .cur file to the mac format above, how?

View 1 Replies View Related

Photoshop :: Camera Raw 7 Slow Zoom In / Out But Fast Process 2003 Or 2010

May 6, 2012

I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?

View 5 Replies View Related

3ds Max :: Pan And Zoom Goes Really Fast?

Mar 7, 2012

Ive been using 3DS Max for about 3 hours now, and seem to be picking up on it very quickly (Props to everyone involved for user friendliness). Im just puzzled about one thing. In my perspective viewport, panning and zooming happen realy fast, zooming close is impossible, as it zooms through and past the object with one scroll-notch. All zooming in other viewports are just fine, its only perspective that I'm having an issue with.

View 9 Replies View Related

GIMP :: Animated GIF Too Fast?

Sep 5, 2011

I can't slow down my gif.

I save as animation. However my setting of delay between frames makes no difference. I set it at 200 milliseconds and another at 65000 milliseconds

View 1 Replies View Related

VideoStudio :: MTS Too Fast In Clip Mode?

Jun 20, 2011

I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.

View 4 Replies View Related

VideoStudio :: Video Playback Very Fast?

Jan 5, 2013

I have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.

I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.

View 9 Replies View Related

AutoCAD LT :: Fast Way Of Creating Layouts

Oct 21, 2011

Our company has lots of drawings/part-numbers that have anywhere from 2-9 sheets.  These are all saved as individual .dwg files.  I am looking to Xref the "extra" files in one main file and make layouts of those Xrefs for ease of plotting. 

As we only have LT, we obviosly can't use the "Sheet Set Manager", and this is the best way I know how to do this. Is there a fast way of creating layouts (other than right clicking and selecting "Page Setup Manager"?

Or maybe I should say it this way: What do you thing is the best way of going about this venture.

View 9 Replies View Related

Premiere Pro :: How To Get Fast Exporting Times

Feb 15, 2014

i have recently brought a new computer (very powerful) for the things i want to do, as i am also posting this you can tell i make alot of videos as well.
 
Here are my computer specs:

intel core i7 quad core 3.70ghz
16gb beast ram 2400mhz
4gb amd radeon r9 290 graphics card
asus SSD writes @ 830mb/rs
 
At the moment i am exporting a video which is 1hour and 20 minutes long and have manged to get the export time down to 30-40minutes
 
I have always been trying to figuring out how to get faster exporting times for a long time now, is it dependant on the sequance settings as well?

View 24 Replies View Related

After Effects :: Fast Preview Performance

Apr 25, 2013

I am buying a laptop for AE for mobile reasons.does the fast preview(so the instant result after changing an effect value you get in the preview window) depend on gpu or cpu, or both depending on what effects are used? I am looking at a 670mx for cuda, but 7970m for dominant opengl scores.
 
Will these 2 gpu's give me different performances regarding fast preview,or is looking into different gpu's not a worthy question yet due to After effects mostly being a cpu heavy program? Now i know all that ray tracing acceleration and how nvidia cards are necessary for that, but this is regarding fast preview only.

View 3 Replies View Related

VideoStudio :: Fast Video In Previews For Clips X5?

Sep 3, 2012

I have installed Videosudio Pro X5 yesterday and I've encountered a really strange problem.

When I select the movie itself and view it in the preview window it looks fine.

However if I select any individual clip in the library or timeline the preview plays through at high speed. It will play through a 40 second video in less then 2 seconds.

Here's where it gets really weird. If I go into options and change the volume from 100 to 101 it will play at normal speed.It's annoying have to do this everytime I want to play a clip.

View 4 Replies View Related

CorelDRAW X6 :: Fast Drawing (transparent Layer)

Jul 17, 2013

I want to draw a model from a picture but the picture is very complex and i need to use the original picture in a layer and use a another transparent layer and then i draw the model in the transparent layer.

How to create a trasparent layer in corel draw ?

I need copy the original picture in new layer.

View 3 Replies View Related

AutoCAD 2013 :: Not Running Fast Enough On Laptop?

May 16, 2013

when my pointer is in the drawing window, it disappears. when i move away to the ribbon or quick access tollbar, it reappears.

View 7 Replies View Related

AutoCAD Civil 3D :: Which Is Fast Way To Apply Different Styles

Mar 6, 2013

I'd like to have a fast method to apply "something"  to view my drawings labels and points (by now)  with different styles depending of my needs. I'd want to view my "station points " with a green circle near the station number,  but In other "work scene" maybe I want to see nothing more a one pixel point, or I dont want to have my work space full of numbers.... 

I'd want to have a dropdown menu to customize how I'd want to view my cartography.The same I'd need to layouts. Is it possible to say this layout plots this symbol in this way and this another plots it using another style? ( and if possible to have a global way to do this with a whole set of styles)

Also... Is there any way to apply this when use a xref ?  That is to say: is it possible to get my main drawing have control over its xrefs ? I'd want to have a way to view this xrefs in different ways...also a way to override layers properties from the main drawing.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved