I want to draw a model from a picture but the picture is very complex and i need to use the original picture in a layer and use a another transparent layer and then i draw the model in the transparent layer.
How to create a trasparent layer in corel draw ?
I need copy the original picture in new layer.
Or is there no fast forward or fast rewind in the timeline. Like double tapping the "L" key or something in other programs...
Editor of things...
how to draw and big fat line - about 24 pt - with rounded ends, then give that line an outline of its own so I can change the 'fill ' - the original line colour - and get an outlined line?
And just for fun, I want the 'fill' to be semi-transparent!
Today i opened a psd file which 200 layers. Paint.net is very slow then (as all layers are flatten, pdn is missing hierarchical layers), but that is another problem.
I wanted to hide some background layers and "copy merged" a selection.
It took me 10mn to find all the backgrounds layers without this tool.
In photoshop the tool exist as a property of the "move selection" tool. Ie: you must first select the move selection tool, then select "layer" in the properties toolbar.
Any way to get that for v4 ? Will v4 be on github so we can clone and make patches ?
I have an image with several layers. The background layer is transparent. When I merge the layers, the background becomes white. Can anyone tell me what I did wrong or didn't do that prevented my background from staying transparent.
View 4 Replies View RelatedI have been painting a 3d model in photoshop cs6 but I appear to have some kind of bad setting (which I am at wit's end trying to find out) which causes any 2d layer I try to merge down onto the 3d layer to be projected with some very large amount of transparency.
View 2 Replies View RelatedI have an image with 8 layers and i want to draw lines. So I make a new layer. While this layer is selected, i select the line tool and draw a line. Then, as I want to move this line, I select the move tool and try to move it. But instead of moving the line I just drew, photoshop automatically switches to my background layer (although i'm not sure it's defined as "background layer") and moves the entire content of the layer.
To see what actually happened, i hid each layer in the layer palette... And still... here was my line. (with all layers hidden, is it POSSIBLE to have anything?)
I tried to select my line and then, using the move tool, move it, but the message "could not move the selection because the selected area is empty"...
I'm trying to get a transparent PNG of this icon:
but it's a screen layer over its background:
and I can't figure out how to extract it as a white/transparent icon. When I try to copy/paste that layer, i get the image with a black box:
Here is a photo that I am trying to duplicate the techinque from. I have figured out how to tint my original photos, but I can't figure out how to layer them so you can see both, without either of them becoming faded. I'm running CS6. It seems like it should be so simple.
View 7 Replies View Relatedi have always wanted to know how to do this so that i can make better themes for my cell phone, ill try explain it the best i can i hope someone understands me.
Here is the theme creator for my phone, well im making one for my wife actually.....
see the red circled area thats the icon that will hover over your choice of selection. As you can see the properties are 91x69 I have found the perfect picture to hover over the menus, however if i just crop the picture 91x69 there will be some bacground image left... Code:
I am trying to create sort of a rounded box, except with one corner only. I am quite new to photoshop and am running into trouble creating the top left corner, (the only corner I want to show). I have created the background set as transparent, then used the rounded rectangle to create a round corner, then created another layer and another rounded rectangle over the first one, so now I have a thin line, with a rounded corner.
The problem is, the middle section is still white, so I have to manually use the eraser tool to erase that layer to get the transparent background to show through instead of the white background.
I am sure there is a better way to do this. How can I set an entire layer to be transparent ?
What I want to do is make it seem as though an image is super-imposed on another. More specifically I'm trying to put someone's face on a guitar in a picture and had two layers:
1) The guitar
2) The persons face
if it's possible to make the persons face transparent enough(If at all) so it would appear on the guitar?
I've been looking at some tutorials lately and some of them say to create a "transparent layer." Is this a special setting for the layer or does this mean that I can just create a layer and set the opacity down a little bit?
View 3 Replies View RelatedI want to use the "Add Noise" effect but have it apply to a transparent layer. In other paint programs, this would just add generated noise pixels to the currently selected layer, but in Paint.NET it appears like it's using the source pixels as input for the noise effect. While visually this effect is pretty on existing image, it doesn't work on transparent layers. Is there a way to just add regular noise to my transparent layer? What I'm just trying to achieve is generate a television static effect, but have those pixels that were left untouched by the noise effect remain transparent. I need the transparency for use outside of Paint.NET. Is there a way to do this?
View 3 Replies View RelatedIf I have a black background, and I make a new layer that is transparent. Then if I put a filter>nature>flame on the transparent layer, it's not as good looking, as if I put the flame directly on the black background. Why is that? Annoys me a lot, for I can't make good pictures because of this, since I can't use layers to make it more "deep looking"
View 2 Replies View RelatedI'm trying to 'lift' a technical drawing from a white background and place it on a transparent background.
View 5 Replies View RelatedI just want to make a simple drawing (a few concentric circles) on a transparent background... How do I do this, how do I make the background transparent?
View 3 Replies View RelatedI want to make my layer volumetric transparent.
Like:
When you choose white&black and drag with gradient tool, it has a soft fade to black. I want to make it like:
Center of image (%100 Transparent)
Soft Fade
Borders of image (%100 Opaque)
I'm trying to create a transparent layer in Photoshop. I can't even find the option to make it. Whenever I make a new layer, it just comes out white. I'm using Photoshop CS3 extended.
View 13 Replies View RelatedI have a large real estate map upon which I want to overlay a large amount of text labels that I can periodically modify. How do I do this without either making hundreds of layers or, if flattened, making the text layer obscure the underlying map?
View 9 Replies View RelatedI'm working on an image to print onto t-shirts for our holiday.
When I upload it into vista print it says there has been a semi-transparent layer detected which may affect the quality of printing (as they are being printed on black t-shirts - they put a layer of white behind to ensure best print quality)
The problem is I can identify what the semi-transparent part is! I've checked all layers and they are set at 100% opacity.
how i can make these lights with the transparent layer?
I have attached the image file...
Basically, I was working on a drawing in GIMP, and the paintbrush tool would not work on a transparent layer. I had one layer under it, which was white and had my drawing. The brush would work on that layer, but not the transparent layer above it. I tried with my Wacom Tablet and my mouse pad and neither worked. What else was peculiar was that I could use the Pencil Tool on the transparent layer.
View 4 Replies View RelatedI created a layer of text in Photoshop (CC) that has a transparent background. I want to place this text in an Illustrator document overtop of the artwork already there.
I dragged the layer from PS into AI. It transfered fine but in AI is has a white background.
I am sure there must be a way around this - I just don't know AI well enough.
My logo was greated in Photoshop as a logo with text on a transparent layer. Saved as a jpg-file I tried to "import" this logo as a Lightroom-watermark. It sort of worked, but the transparent layer in PS now shows as a white background "covering" too much of the photo (see screenshot). I'm using PH CS6 and LR4.
View 3 Replies View RelatedI am having an issue with a drawing, I have an assembly running in Inventor, the parts appear to be in a transparent mode, it is actually a translation from CATIA V5, everything seems to be ok, but when I open a drawing to create dimensions, only the parts that are not transparent appear in it.
View 4 Replies View RelatedI'm trying to merge select layers to send my file to a publisher, but the drawing layer which is set to multiply loses its transparency when I combine layers (the original white behind the image shows). If I flatten the entire file, it works, but I can't do that in this situation.
View 12 Replies View RelatedI want to have a Blur Oval Vignette feathered on the inside on a transparent background to use as a template. So then I could open an image, then open the template on top of the background image and would automatically have a Blur Vignette image without having to create it from scratch each time.
View 3 Replies View RelatedIn other words, I have a green patterned background, and I want to add a transparent triangle (which should then be the green background by making it transparent) over a white layer. To sum it up, I want the triangle to be filled in with the green patterned background over the white layer. How do I do this?
View 6 Replies View Relatedhow to make a layer or an entity transparent within a viewport?
I figured out the following code found in:
[URL]
It gives an error at New Autodesk.AutoCAD.Colors.Transparency(127)
Using transactie AsTransaction = DWG.TransactionManager.StartTransaction
Dim Layertable AsLayerTable = DWG.LayerTableId.GetObject(OpenMode.ForRead)
Dim VP AsViewport = transactie.GetObject(Doc.Editor.CurrentViewportObjectId, OpenMode.ForWrite)
Dim LVPO AsLayerViewportProperties
ForEach LayerID In Layertable
[code]....
I have a transparent canvas and would like to put a "square" on it. I'd like the content inside the square to be transparent as well, but I'd like to apply the "Drop Shadow" and "Outer Glow" style to the box, while keeping the inside of it transparent.
When I try to do this, nothing occurs because the "square" is empty. The only way I can get the shadow to occur is if I fill in the box with a color, such as white, first. However, then the center isn't transparent how I'd like it to be.