Basically, I was working on a drawing in GIMP, and the paintbrush tool would not work on a transparent layer. I had one layer under it, which was white and had my drawing. The brush would work on that layer, but not the transparent layer above it. I tried with my Wacom Tablet and my mouse pad and neither worked. What else was peculiar was that I could use the Pencil Tool on the transparent layer.
View 4 RepliesI made a new template, and my Pencil and PaintBrush would not work. When I tried to draw something, nothing appeared. The icon was there, but no drawing area. I tried to ajust it with the [ and ]. Nothing changed.
View 4 Replies View RelatedI have a skull on layer skull and bones on layer bones which is set to display under layer skull. I want to add a layer mask and paintbrush out the bones that are inside the skull area.
View 3 Replies View RelatedIt seems the color part of paintbrush in the LR 5 trial isn't working.
View 1 Replies View RelatedIf I have a black background, and I make a new layer that is transparent. Then if I put a filter>nature>flame on the transparent layer, it's not as good looking, as if I put the flame directly on the black background. Why is that? Annoys me a lot, for I can't make good pictures because of this, since I can't use layers to make it more "deep looking"
View 2 Replies View Relatedhow i can make these lights with the transparent layer?
I have attached the image file...
I cannot get an added layer to show slightly transparent. I like the effect of bringing the main layer to the front and having most of the focus there with a slightly transparent layer for text, etc. Every time I try to use the transparent/opaque slider in the layer panel, it does nothing until I cross the 50% threshold and then the layer just disappears if I go below 50%. I originally had a .gif, but I tried saving it as .png, and .xcf (gimp file) and it still would not work.
Interestingly, I tried it on another .png I had and it worked.Why would it not work sometimes and then work other times? I have attached an example file. I wam trying to make the new layer with text slight transparent.
EDIT: it will not let me upload the file, it eeps saying "undefined", but if you want an example of what I'm doing check out [URL] ...., my website with previous example of slightly transparent layers made in paint.net
Other tools seem to work fine.
Example:
Open GIMP
New File, 50x50 px, RGB, 72ppi
Paint Bucket, Lasso, Magic Wand, all work. Pencil, Paintbrush - nothing.
If I open an image, I can select it, duplicate it, color pick, paint bucket and all of the functions in the dropdown menus seem to work, but no drawing or painting.
I opened a transparent PNG and exported the PNG to another file and unchecked 'save color values from transparent pixels' but about 20% of the color values in transparent pixels STILL remain in the picture when viewed in other programs that show those pixels!!! Gimp is NOT removing ALL color values in transparent pixels!
View 1 Replies View RelatedI sell a template that has a transparent layer in sections, after saving as jpeg it is supposed to go white, but for some of my customers it recently started going black!I at first thought it had to do with not pasting the layers correctly, but its like this after export, so I don't think that should matter...I've attached a sample image so you can see what is happening. Where it is black, it was originally transparent around the circle image, and normally would save white.
View 2 Replies View RelatedWith Gimp 2.8 (Mac) I have made a 3D text with a YouTube tutorial. It looks like the Pulp Fiction logo. [URL]...........
How do I overlay a grungy texture, so the letters look 'older'?I tried making the texture image the top layer in the list on the right and then this: right click -> layer -> transparency -> color to alpha.But then, the 'see-through' texture covers the entire square transparent background! Not just the letters...So, how do I add a transparent texture layer over a shaped image that has a transparent background?
So I have this small image consisting of a sine:
and I would like to get a gradient border on it (something like two pixels would be perfect) from the green sine to black. (Partial transparancy would be nicer but since .gif doesn't support that...and yes I do need it to be a .gif XD)
Problem is...that I can't get any of the filter options to work, they are all disabled. After some tests I noticed that this is because there's an alpha layer that for some reason disables the filters.
So...how to get a gradient (green to black) border on the sine?
I keep trying to save a gif animation with one frame per layer but that is not working!! it still is combining all the layers in the animation even though I tell it one frame per layer!
View 4 Replies View RelatedToday i opened a psd file which 200 layers. Paint.net is very slow then (as all layers are flatten, pdn is missing hierarchical layers), but that is another problem.
I wanted to hide some background layers and "copy merged" a selection.
It took me 10mn to find all the backgrounds layers without this tool.
In photoshop the tool exist as a property of the "move selection" tool. Ie: you must first select the move selection tool, then select "layer" in the properties toolbar.
Any way to get that for v4 ? Will v4 be on github so we can clone and make patches ?
I have an image with several layers. The background layer is transparent. When I merge the layers, the background becomes white. Can anyone tell me what I did wrong or didn't do that prevented my background from staying transparent.
View 4 Replies View RelatedI have been painting a 3d model in photoshop cs6 but I appear to have some kind of bad setting (which I am at wit's end trying to find out) which causes any 2d layer I try to merge down onto the 3d layer to be projected with some very large amount of transparency.
View 2 Replies View RelatedIm using Photoshop cs6 and im trying to blend 2 images together, i followed this tutorial;
[URL]........
which i also foiled last year to blend my images and it worked, but for some reason nothing is happening this time i try it, and what im doing differently to what i did last year!
I have attached an image of what im trying to do but it doesn't seem to be working at all.
I have a gradient in CS6 which I have set from 0% white to 100% Spot Color then back to 0% white as I want the gradient to be transparent at the edges.
For some reason the 0% is not displaying as transparent on the screen, even though in the Gradient editor it does show the transparency is there.
I'm working with AutoCAD 2012 and I was surprised to find out that after typing: 'CAL "Expression" came up; and from all appearances, you'd think Autocad was awaiting (if not expecting) my input. However, none appeared on screen as I typed.
CAL command worked.
My setvar of CALCINPUT is set to 1.
We have lost the use of the two transparent commands 'spe and 'sse. When I either click on the toolbar or type 'spe or '_spe in the middle of a command, they don't work like the other transparent commands. When I click on toolbar by itself, I get an error "Unknown comment "SPE". The other transparent commands say something like "PSE must be called from within another command".
Also, is the actual comment 'spe the command name or is it an alias. I was thinking that if I knew the command name, I could create another allias as a work around.
This is happening on multiple computers.
I get an error about transparent zoom not working because it requires a regen. I do not want to turn the autoregen off.
View 1 Replies View RelatedI have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
How do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
I'm trying to get a transparent PNG of this icon:
but it's a screen layer over its background:
and I can't figure out how to extract it as a white/transparent icon. When I try to copy/paste that layer, i get the image with a black box:
Here is a photo that I am trying to duplicate the techinque from. I have figured out how to tint my original photos, but I can't figure out how to layer them so you can see both, without either of them becoming faded. I'm running CS6. It seems like it should be so simple.
View 7 Replies View Relatedi have always wanted to know how to do this so that i can make better themes for my cell phone, ill try explain it the best i can i hope someone understands me.
Here is the theme creator for my phone, well im making one for my wife actually.....
see the red circled area thats the icon that will hover over your choice of selection. As you can see the properties are 91x69 I have found the perfect picture to hover over the menus, however if i just crop the picture 91x69 there will be some bacground image left... Code:
I am trying to create sort of a rounded box, except with one corner only. I am quite new to photoshop and am running into trouble creating the top left corner, (the only corner I want to show). I have created the background set as transparent, then used the rounded rectangle to create a round corner, then created another layer and another rounded rectangle over the first one, so now I have a thin line, with a rounded corner.
The problem is, the middle section is still white, so I have to manually use the eraser tool to erase that layer to get the transparent background to show through instead of the white background.
I am sure there is a better way to do this. How can I set an entire layer to be transparent ?
What I want to do is make it seem as though an image is super-imposed on another. More specifically I'm trying to put someone's face on a guitar in a picture and had two layers:
1) The guitar
2) The persons face
if it's possible to make the persons face transparent enough(If at all) so it would appear on the guitar?
I've been looking at some tutorials lately and some of them say to create a "transparent layer." Is this a special setting for the layer or does this mean that I can just create a layer and set the opacity down a little bit?
View 3 Replies View RelatedI want to use the "Add Noise" effect but have it apply to a transparent layer. In other paint programs, this would just add generated noise pixels to the currently selected layer, but in Paint.NET it appears like it's using the source pixels as input for the noise effect. While visually this effect is pretty on existing image, it doesn't work on transparent layers. Is there a way to just add regular noise to my transparent layer? What I'm just trying to achieve is generate a television static effect, but have those pixels that were left untouched by the noise effect remain transparent. I need the transparency for use outside of Paint.NET. Is there a way to do this?
View 3 Replies View RelatedI have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.