i pushed tab, or F, or both, or neither. Either way, the status bar is no longer there. i do not see any Window->Status Bar option. Where is the option to toggle the status bar visibility. CS4
View 3 RepliesStatus bar.JPG
Is there a way to have the status bar show up whenever a file is printing or saving. So far the only way it shows up is if you click on the little icon at the bottom right of the window.
Last night while watching the progress of the status bar I glanced down and saw there is also one in Photoshop icon on the Dock. I had never noticed it before.
Nothing earth shattering here but it's funny how you can walk down your street for years and then one day notice something. And you scratch your head and say "Has this always been here?
I am using Photoshop CS3 for Windows. I have created a metadata template in Bridge with my contact information and my copyright information, etc. When I created the template the field called Copyright Status was not available but if I open an image and go into File Info by doing Shift-Ctrl-Alt-I the Copyright Status field is available and I can change it from Unknown to Copyrighted. I like this field because it shows the image is Copyrighted (Unknown looks bad and unprofessional) and also when you open the image in PS the © symbol shows at the top of the screen in front of the file name.
Is there a way to create a metadata template where I can have Copyrighted in the Copyright Status field?
n my Image i have several layers, and two adjustment-layers for manipulating hue/saturation of parts of certain layers. Think something like having a picture of a person, and having the adjustment-layers to change the persons pants and shirt independently. So you can easily make color-variations of what the person wears, and save them, e.g. as jpg.
Â
What I want is to add a little textarea which ends up on each jpg (not meta-data, I mean readable in a corner on the actual image), that gives me the color-values from the adjustment layers that were used to create that very image. So at a later time when I have one of my jpgs and it hits me that this exact color-combination is perfekt I can recreate it easily. Of course I could do it by hand, but is there a way to automate it, using text-variables linked to the hue/saturation-layers?
Just upgraded to Photoshop Elements 11 on a x64 Dell running Win7. When trying to share photos using Flickr (which worked previously), I get the following:
 Â
I've tried resetting accounts in Adobe Partner Services, Clearing Online Service Data, and refreshing the list of services - but makes no difference.
Â
(Here's the text from the above, for search engines to chew on:
Â
HTTP Status 500 - type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException org.apache.jsp.csp.error_jsp._jspService(error_jsp.java:197) org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
[Code] .......
i have looked everywhere for torublshooting for this. but they are all for 3d max 2009. I have the 2012 version and the render status bar is gone missing. I cannot find the INI file.
View 1 Replies View RelatedSomtimes I get some cdr files that contains in Status Bar information about embedded bitmap source and file extention etc. I`m not talking `bout linked bitmap files. And in some cases can see the path, but in other cases not.
View 3 Replies View Relatedit's possible to see a status of savon operations in CorelDraw X6? I've read that the progress bar has changed to a small icon in the statusbar in X5, but in my recently installed X6 there's no such thing. I always have to guess whether Corel is done saving or not. This is also relevant for exporting to PDF.
forcing the measuring tool to measure only horizontally/vertically. The automatic function does not always do the trick. I have a feeling that the improvements of the measuring tool has actually made it less usable. The centering of the values used to work better in X4 and I still haven't managed to change the default color of the measurement lines and text
I am trying to clean up our drawing database and have run across several drawings that are showing external file references with a status of 'unreferenced'. During a scan early last week of all current revisions of our drawings (about 120000) we uncovered about 7500 drawings that don't quite cut the mustard as it pertains to the use of attachments. I have written a small .NET app that scans through my drawings, but I am having difficulty with one aspect of my probing.
I need to be able to open up an AutoCAD drawing, navigate to said drawings image dictionary, get a RasterImageDef from that dictionary, and then check to see what the 'status' of that drawing is. By 'status' I mean the status as reported in the External References dialog that appears when using the command 'xref'. In particular, I want to write out/show a message when I encounter a drawing with an attachment that has a status of 'Unreferenced', which I take to mean that the drawing was attached at one point, has been unloaded, but not properly detached.
My problem is that I can't seem to get to any property that shows that status. I have used ARXDBG to snoop the database and I can verify that I see the images still in the image dictionary, but not in the drawing itself. I also can't seem to get at thte status of the attachment. To compund the matter, everytime I try to inspect the RasterImageDef object I get, AutoCAD locks up and bombs out.
I am guessing I could get at what I need via C++/ObjectARX but I don't want to go that route if I dont have to. I have attached a snippet of the code I am currently using to scan through my drawings, not perfect or even pretty, but it works.
I am working as an IT Support staff in a small organization. Being a new employee here I could not find out the details of AutoCAD 2010 CD, whether its a single user or network user, its upgraded or not. How Can I find these details using the serial number and product key of the CD.
View 2 Replies View RelatedI just installed 2011 and was in the process of setting up my workspace when I realized i could not find the Status Bar pull down on the View Tab/Windows Panel. Help still says it is there. When I went into the CUI I could not find the command or even the icon. I know that you can right click and edit the status bar buttons but you can only do them one at a time and then you have to right click again to get rid or add the next button and then right click again....the drop down, available in the last several releases enabled you to just check them on or off all at one time.
View 9 Replies View RelatedLT 2013. Under Layer Ctrl, the status tab (light blue sheet of paper icon), highlights as light blue (in use), regardless of whether or not its in use. The only way I can force a refresh is deleting / attempting to delete a layer (eg. del '0' which obviously dosen't work); but forces an update, where those in use remain light blue, and those not in use revert to white/grey.
how I can fix this quirk of not updating/refreshing when the Layer Ctrl is opened.
When in the layer properties manager....then in the layer filter properties....when i click into the 2nd tab "status" it shows me 4 icons when using the drop down icon..what are each of these representing
View 1 Replies View RelatedI'm using LR 4.3 on a Win 7 64 bit PC. I notice that many of my photo's show "Metadata Status has been changed" but when I try to synchronize the folder(s) the message does not change. However, when I click the icon next to the message it will update that one photo. How can I update ALL photo's so they have the current and correct metadata without going one photo at a time.
View 1 Replies View RelatedWith my dng files, when saving metadata to file (ctrl + S), after a moment the status of the file is become again as if I had not save the metadata. I used an old trick for this bug : saving metadata, then importing metadata from file, then it is durably ok.
View 1 Replies View RelatedI just installed X6 and I noticed in the status bar the width of the object I click on only shows up with black outlines. If it is a colored outline, it shows the color but no width. If it is black it will show the outline as black but also the width.Â
View 14 Replies View RelatedHow to retrieve the Status of attached Image file.
View 5 Replies View RelatedI finally managed to capture this phenomenon.... It happens every day, several times a day, but I was never able to capture it until now. Seems to occur when you open and close various palettes, but it's not reproducible on demand. Â
Civil 3D 2013, latest updates, Quadro 2000 (driver ver 9.18.13.1125)
Is possible to save a modifier status to a scene state?
For ex. turn slice modifier on/off automatically in different scene states.
Student had installed 2012 version and the text is all jumbled up in the status bar. He has been using the program though. On occasion, says he also sees it affecting option bar. See attached.
View 5 Replies View RelatedWhen I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
View 3 Replies View RelatedHow I can change the status of a certain area to transparent?
I know, I can change the "Transparency Alpha" in the colour box, but on screen is still displayed the color. Worse, I need a transparent area for an RPG Maker, and this program doesn't take said area as transparent besides the setting in Paint.net.
I've been using LR for adjusting photos for about 6-8 years now, but have just recently gotten time to start better organizing my stuff. I have about 40,000 images that mostly have keywords and descriptive file names, but are generally without ratings, color labels and are mostly not in collections. I must admit that there's a lot of junk in there (duplicates, mostly) that I have to purge. I can probably work it down to 10,000 images. In addition to putting ratings and labels on things, I want to sort them into collections, but that task would be easier if I knew which images were NOT in collections so I could concentrate on them and work that set down. I don't see a way to set up smart collections to show images that are not in a collection. It appears that the smart collection criteria can be selected from whatever text selection criteria are available, and I don't see inclusion in a collection as one of them. I also don't see collection status as one of the metadata items that could be used to filter things.
Â
In a previous thread from 2007 I found the following workaround:
Â
Clear the quick collection and set it to the target collection.In the library view, select all the collections. Select all the photos.Go to the catalog and view all photos.In the Edit menu, click on "invert selection".That selects all the images not in a collection. Pressing B puts them in the quick collection.
Â
The only problem with this is that when you select an image from the quick collection and place it in a collection the image remains in the quick collection. In a smart collection filtered by collection status (not in a collection) it would disappear from the smart collection when it goes into a collection. So it would be much nicer if there were a way to filter for "not in a collection" for a smart collection or even in a metadata filter.
Â
The above workaround does work, but you will have to refresh the quick collection whenever you lose track of which images you have placed into a collection.
Â
Of course, the best solution would be not to get into my position in the first place. Always dump the junk out of the catalog and place all the keepers in appropriate collections.
LR 4.1 in Windows 7 64.
I have setup smart collection to show all images that need to be saved to disk - "Metadata status has been changed". I did the update in smart collection and also in Library folder. On the disk xmp-file seems to be changed but in LR Metadata status is still "Has been changed". The files are CR2-files.After command status was one second "Up to date" but changed very soon "Has been changed". Metada Date was changed OK. Same happend with tif-files but not with jpg-files. All changes are in the sidecar file.
Is there a way to change status of a photo in a facebook export publish folder from "new photos to publish" to "Published Photos"?
View 2 Replies View RelatedI don't know why it happens but whenever I start Corel it starts fine but after a while the color information disappears and says "Processing" until I restart it. I have uninstalled, F8, latest updates, the whole bit. I work in the sign business so I must be crazy.
View 7 Replies View RelatedI have this weird problem where some objects won't work like the usual. The original pic is like this,but when I see it in thumbnail in windows explorer, some objects are missing but they're still there when you open the file!
I marked the status bar, in those missing objects it says "Curve on Desktop" while other objects of corelDraw, no matter what kind of file, they're always written as "Curve on Layer 1".
 And then when I Ctrl+G all the objects above in pic 1, all those objects with Curve on Layer 1 and Curve on Desktop, it becomes like this: I don't know what happened. When I made the shape in the 1st pic, I used old file with similar shape, I only edit the sizes & the colors, but previous File is just fine, only this one looks weird.
Status Bar,
Back in x3 and earlier versions, bottom of workspace, you had a option for Object Details and Object Information it would display the font used & Size used if you made a rectangle it would give it's sizes h & w
How do I get this set back up in x5, running win7 64 bit.
Every time I open a file in Inventor a dialog box comes up that says "Updating file status from vault". In most cases it is not a big deal, but when an 1000+ part assembly is opened this box flashes for each part in the assemly causing a delay in opening the file. Needless to say this is very annoying. So my questions are what is this doing exactly and can I turn it off?
Inventor 2011
Vault 2012 Pro
Windows 7 x64
Inventor Professional 2014 SP1
I have a sketch that Inventor changes its status between under constrained, over constrained, and fully constrained depending on dimensions (makes sense), and wether I rebuild the model (WTF?).
Steps to reproduce:
1) Open the attached .ipt file.
2) Examine Sketch11 (under Face3) It should be fully constrained.
3) Exit the sketch. Open the parameters dialog and change the value of "angle" from 45 to 60. (If you get an error message change it to 50 first, then 60. It's a work in progress.)
4) Re-examine Sketch11. It is now under constrained.
5) Exit the skecth and go to the manage tab. Click "Rebuild All".
6) Re-examine Sketch11. It is now fully constrained.
7) Scratch your head and post back with your theory.