Photoshop :: Adding Info About Status As Text Layer?
Sep 21, 2012
n my Image i have several layers, and two adjustment-layers for manipulating hue/saturation of parts of certain layers. Think something like having a picture of a person, and having the adjustment-layers to change the persons pants and shirt independently. So you can easily make color-variations of what the person wears, and save them, e.g. as jpg.
What I want is to add a little textarea which ends up on each jpg (not meta-data, I mean readable in a corner on the actual image), that gives me the color-values from the adjustment layers that were used to create that very image. So at a later time when I have one of my jpgs and it hits me that this exact color-combination is perfekt I can recreate it easily. Of course I could do it by hand, but is there a way to automate it, using text-variables linked to the hue/saturation-layers?
Somtimes I get some cdr files that contains in Status Bar information about embedded bitmap source and file extention etc. I`m not talking `bout linked bitmap files. And in some cases can see the path, but in other cases not.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
I am trying to add a simple text layer to some relatively small JPEG files - each file is only about 3 or 4 MB in size before any editing or additions are made to the files. I am using P-shop CS2 on a PC with Windows XP SP2.When I add a few lines of simple text (with no special effects) to any of these files and attempt to save the edited file as a .TIFF or .PSD file with the text as its own layer in the file - the resulting .TIFF or .PSD file is a 30 or 35 MB file which is hard to work with because of its size. These files have only two layers in them - the text layer and the base image. It just does not seem logical that a simple text layer would make a file increase in size by 10 times.
I would like to try to save the edited image files as .TIFF or .PSD so that I can go back and make future edits to the text layer.I have tried to save the edited file with the text layer as a .zip file but these files are also still very large - 20 MB or so.Maybe I have some basic file settings wrong that are making the files so large? Does anyone have any suggestions on how I can add a simple text layer to a relatively small image file, save it as a .TIFF or .PSD file and keep the resulting file size manageable?
LT 2013. Under Layer Ctrl, the status tab (light blue sheet of paper icon), highlights as light blue (in use), regardless of whether or not its in use. The only way I can force a refresh is deleting / attempting to delete a layer (eg. del '0' which obviously dosen't work); but forces an update, where those in use remain light blue, and those not in use revert to white/grey.
how I can fix this quirk of not updating/refreshing when the Layer Ctrl is opened.
When in the layer properties manager....then in the layer filter properties....when i click into the 2nd tab "status" it shows me 4 icons when using the drop down icon..what are each of these representing
When I highlight any object in model space the layer control, color control or line type control does not change from the current layer status to the layer of the high lighted object if it is different. I am also not able through this layer control bar able to high light an object and use the fly out arrow to go into the layers and change this object to another desired layer for this object. I have never seen this function just not work before and can find no setting or preference that might not be turned on to make it function. why it is not functioning?
What is the layer "Status" in the layer property manager? It doesn't correlate with the On/Off or Freeze/Thaw . The icon appears to be a sheet of paper but some are blue and others are gray. I cant tell what makes them change colors from blue to gray.
I am using CS5 and was forced into a workflow where everyone is using icons from the symbol library (web symbols to be exact). They are not being used as "symbols" per se, just icons. The standard procedure is to drag a symbol to the artboard and then "break link" with the button.
This sounds fine in theory but now everytime I click on this icon, my layer status is expanded (totally annoying).
This is completely recreatable from machine to machine.
why unlinked sybols would cause the layer dropdown to expand? (or how to avoid it)
I'm working on a project looking at modifying cycle routes. I just discovered that they've been added to google maps and I was wondering if there's a way to import the cycle routes from an area on google maps into CAD. If not, I can draw them in on the OS but it would be time wasted if there's a way.
I thought maybe on AutoCAD WS on chrome, but it seems limited on the mapping features available.
Is there a way to display the projection (FL-W83) or Datum (NAD83) of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort? I belive the information resides in the .NET framework, how can I get that into my titleblock?
HP Z400 Workstation Intel Xeon W3550 -Cores 4 12GB Triple-Channel DDR3 @ 533MHz 2-HP LE2201w @ 1680x1050 ATI FirePro V3800 (FireGL) (HP) MS Windows 7 64-bit
in LR3 custom package did not support photo info. Has this changed in LR4 - is there a way to add a caption to a jpeg file generated via the custom package?
Basically I have an image that I created that has 3 layers. 1 is a bunch of brush strokes that are red, one with strokes that are green, and 1 with strokes that are blue. What I want to do is take the red layer and make all its strokes green, and vice versa, basically just switching the color of everything on the layers. I would think there is some kind of setting I could just change.
Student had installed 2012 version and the text is all jumbled up in the status bar. He has been using the program though. On occasion, says he also sees it affecting option bar. See attached.
The Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers. It only shows the after values on both sides of the Palette.
The two macs with this problem are:
Mac Pro 2 x 2.93 Ghz 6-Core intel Xeon 96 GB 1333 HZ DDR3 ECC ATI Radeon HD 5770 1024 MB OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro 2 x 3.06 Ghz 6-Core Intel Xeon 96 GB 1333 HZ DDR3 ECC ATI Radeon HD 5870 1024 MB OSX Lion 10.7.5
Pic 1. I have an image I want to use as a background, however the image is not complete. I need a part of pic 2 to fullfill it.
Pic 2. The colors around the object doesn't match the colors of Pic 1.
Normally it would be best to cut the object out. However in this case it wouldn't look nice (the object is mixed out (in color) with the rest of the image). If I cut out something the object won't look "proper".
My question:
How can I blend pic 2 on pic 1, using the original object from pic 2 (as it is), and at the same time blend the colors around it, so that it matches that of pic 1 / or simply remove it somehow?
How do I figure out what font is used on text layer on a .psd? I thought highlighting the text or selecting the layer would show me the font used, but it doesn't seem to work that way. Is there an info option or something that can give me this info?
i can access the General layer properties thru the api (circled in green on image). how can i programmatically access the Attributes (circled in red). is this possible?
I think I may have made a big error. While adding text and applying (experimenting) various "Effects" with the text, I used the garbage can icon to remove the "Effect", thinking it is going to remove the 'Effect" from the text, until I realized I had to remove the "Effect" with the edit button, not the garbage can. Have I now permanently removed the various "Effects" permanently or just off the screen? How do I regain them back onto the menu column? How many "Effects" should be visible in order to have the complete set? This was my first experiment with the lettering effects and hope I haven't lost them forever.
I have a type layer with some text in it (a headline, let's say). I click on the layer, I click on the Character Panel, and first thing I see is the color in the Panel is not the color of the font in the layer.
I then click on any Panel property, and the text in this layer is replaced by text from another layer in my document ( a paragraph layer, let's say), but the color is not the same as the layer the text came from.
the file is not optimized in any way, I probably made all sorts of bad decisions that have ended up with me having an unwieldy file that is hard to work with, but it's doing the job for me.
However, I have to make the same change to around 30-40 materials that I created which each have their own individual bitmaps assigned to them, as they all have different text on them.
I want to remove the opacity mapping from each one, but opening each one and making the change, then saving it, is ridiculously long winded with the file performing as bad as it is (running on an SSD with an i5 chip and 16gb RAM.....)
So I'd like to know if there is any way to, for instance, open all those materials in a text editor and manually remove the opacity setting. They are all in "scene materials" in my document.
Maybe I could add them to their own library, open a blank document with this library, edit them there, and move them back?
I just had 3ds max hang while I'd updated half the materials
i am using PS CS4. this is my second day with photoshop. i am very familiar with GIMP but i needed PS for making web site layout. so i downloaded 1G trial and now i do not know how to add a new image as layer in existing image. i tried to drag and drop and tried import , open as but could not find a way to accomplish that.
in GIMP it is file->open as layer option but in PS i could not find similar option.
the reason i want to do is that i want to add a image in header of web page layout.
After I made a selection and then go to modify-Border, the border comes out feathered. Is there a way to create a hard edge border around an image or layer? Also what's the easiest way to create a border around a type layer?
I'd like to add some color to the outlines in the attachment. Right now they have some white background to them so I've got the blend mode set to multiply which works great since they're greyscale. I've tried duplicating one of the channels and creating a selection and/or layer mask from it with not much luck. I tried setting a layer mask and then filling the whole layer with the color I want but it didn't show up at all. I also tried filling the selection with the color I want which worked ok except the layer still has a bunch of white and if I leave the blend mode at multiply the color doesn't show up well.
