Photoshop :: How To Manipulate Color After Changing Image With Bitmap
Apr 25, 2013
I'm just starting to play with turning into images into halftone image. So far I've learned how to do it 2 ways: 1) using the Pixelate>Halftone filter and 2)Converting the image to grayscale then bitmap>halftone.
How to best changel color - not as whole but to convert different section to different colors - I've tried the history brush. I've dragged it into illustrator (which I tried live trace). But I'm not quite getting the flexibility of just painting different areas different colors. Also, what angles work best to avoid strange grid effects?
View 1 Replies
ADVERTISEMENT
Mar 4, 2012
How do I outline an image so I can change the background color without changing the image color ?
View 1 Replies
View Related
Oct 30, 2013
I have a series of images that are color photos of a three-dimensional, cream colored object. The objects have clipping paths around them and sit on a dark background. I have some new images that I need to incorporate into the layout, but their color is a different "cast", more gray than the other cream images.
I would like to apply the original color to the new images. It would be best if this could be done in the InDesign document, but if necessary, I can do it in Photoshop.
View 1 Replies
View Related
Jan 17, 2009
i have been using fireworks for quite some time and it has done everything i wanted it to but now i have hit a roadblock. i have an image set on a blue background and i want to change background color to a dark grey and i want to completely change the image to a dark green. is there a program in photoshop that will do this for me?
View 1 Replies
View Related
Dec 13, 2007
Is there a way of changing the range of colour tones used across an image so that for example I have an image of a yellow rose which is made up of yellow, white an grey tones. I want to change this to pink white and grey tones.
View 2 Replies
View Related
Jun 10, 2012
I have a vector image of a jersey and I'm trying to photoshop it onto a fictional character. The problem is that the jersey's arm is vertical. The man's arm that I'm trying to photoshop it onto is bent. I was wondering since the jersey is a vector image, is there any possible way I can manipulate the sleeves of the jersey to a bent shape so it can have a more realistic look when I photoshop it onto the man.
View 1 Replies
View Related
Apr 6, 2006
Two of mine close friends are going to be wedded at the end of this month and I want to do them a slideshow...as a gift. In some of the images, I want to desaturate certain areas to give more attention to the primary subject of interest.
How do I do that in photoshop?
I achieve that effect the cheesy way: MS Office Picture Manager > Crop> resize to desire result> Print Screen (on the keyboard)> Open Paint> Edit > Paste> Save> use MS Office Picture Manager to crop to desire result.
There are two major problems with that: one, I cant get rid of the "crop frame" from within the image; two, the image quality is decidedly bad.
View 7 Replies
View Related
Nov 19, 2011
Is there anyway to change the color of lines in an image? In a graphic image I tried to upload (But it wouldn't do it) I want to keep the background but want to make the lines a sharp white. (they are kind of a grey) Is it possible? (There are only lines and a solid color background)
View 8 Replies
View Related
Feb 3, 2007
How can I change a selection of an images color. Have an image of a red ladybird (see link below) and want to change it to a different color say a blue or a yellow.
View 3 Replies
View Related
May 9, 2007
Trying to change the blue color in this abstract image (see image) to a much darker green (pantone 561) Any way to do this easily? I am not coming to close to this new darker green color.
View 3 Replies
View Related
Sep 2, 2012
Downloaded photoshopCS 5.1 for windows an when I open up a project an uses the move tool it will not let me manipulate the image
View 2 Replies
View Related
Feb 28, 2008
When creating a new image, it always defaults to CMYK for me... is there a way to set it to default to RGB?
View 2 Replies
View Related
Feb 22, 2008
know of a PS plugin or a freestanding app with which I can tweak images based on digital sound patterns? I use PS CS3.
View 8 Replies
View Related
Sep 2, 2011
I want to add/manipulate a .gif image which is a 'loading' symbol to my website. I added it without any problem and it works fine. The thing I want and perhaps everyone wants that the 'loading' image should stop and then prompted to the website. Although it seems lame but it gives the website a cool effect and everyone thinks that its 'semi-flash'. So now I want it to stop after 2-3 seconds and then prompted to the rest of the website. Can I do it in Xara Web Designer 7 Premium ?
See the attachment.
View 1 Replies
View Related
Jun 30, 2011
I have an image and all I want to do is change it to a different color. So if the image is mostly red, I want to shade it blue but still keep its quality, meaning the light-red pixels will turn light-blue, and the dark-red pixels will turn dark-blue.
I prefer an option that automatically changes all the colors for the entire image, but if there is a shader tool where I have to manually shade the image, that'll work too.
I input the image, then I went to Image > Mode > RGB, and from there I went to Colors > Colorize and used the sliders to change the image to the color I want.
View 3 Replies
View Related
Dec 31, 2013
I have to make the color of this artwork black so that it can be used for screen printing. However, I am not able to change the color of any part of the artwork. I am using CS2.
View 3 Replies
View Related
Oct 20, 2012
I am getting and error message when changing gray scale to bitmap mode: Could not complete the command because of a program error.
View 2 Replies
View Related
Mar 19, 2014
How do I change the color of an image in EPS format using Illustrator? Once I do this how do I change the format of the image from EPS to something I can select onto a website like JPG, JPEG or PNG? I plan to print the image onto a T-shirt.
View 1 Replies
View Related
Jul 24, 2013
I am trying to produce a new logo for our business that has a solid Blue cloud image on a transparent background. I need to add text over this but ideally it will show as white over the cloud background but blue when its over the transparent background.
Cant simply change the color of text as its a curved edge its going over. I assume I will need to do some form of punch out but not sure how to start this.
View 2 Replies
View Related
Oct 10, 2013
Here is the image I am working with.
I want to change the color to hex #00aced (0, 172, 237). I tried the colorfy, but the image comes out purple. Another way that has worked for me in the past, with white images, is by clicking on the channel dialog and dragging the red down. Clicking on the eye, next delete the original image and than add a new foreground color based on what color I selected from the palette. Of course this isn't working either since the image is so dark.
Now in channel mixer it could work if the RGB would go higher than 200, but since my blue is 237 this is where I am stuck. It has worked with other colors, as long as the RGB is less than 200. This is by selecting each output individually, for example, starting with red and entering a value in red and leaving green and blue at 0. Next selecting Green, entering a value in green and leaving red and blue at 0, and so on... Is there some type of mathematical solution for using the channel mixer, or simple yet, is there a way of making my image more white, without losing my shadows?
View 6 Replies
View Related
Sep 21, 2013
First time using GIMP. Following the directions here: [URL] ......
Using, "Color to Alpha," I tried to select the background of my .jpg image. The background is white, the picture (logo) portion is silver. Because of the closeness in color, when I select white, the software selects the entire image to become alpha (transparent).
When I select the color of the picture, silver, I am able to select just the logo portion. How can I take the logo portion, which is now converted to transparent, and give it a black or transparent background, and then return the logo back to its former color silver. The logo is perfect, it is just that I recently switched my site from a white header to a black header and the image has a white background, so that does not look good.
View 1 Replies
View Related
Mar 16, 2013
I am taking macro shots of flowers. I am using black mount board as the background color, but it always comes out as light grey or bluish. The flowers etc. are fine.how I get my image background to the color I want, in this instance Black
View 3 Replies
View Related
Aug 12, 2012
Is there a way to take a flattened image and reverse that so you can manipulate the layers? Photoshop allows it.
View 4 Replies
View Related
Jun 23, 2012
How can I change the color of the background in an image from white to transparent?
I am using PSP v7.04
View 2 Replies
View Related
Nov 22, 2012
I am having issues with the color warper in Autodesk Smoke Prerelease 6. As soon as you change any values (ie changing the saturation to 99.9%) in the color warper the image glitches out and you see weird inverted colours and other artifacts. It is completely unusable.
The workstation I am currently using is a 12 Core Mac Pro 5,1, 16GB Ram, GTX285.
I do not have the issue with the latest version Smoke 2012.
View 2 Replies
View Related
Dec 5, 2012
I am having this problem whenever I synchronize a folder that images have been added into.
Example: I have a folder of images in LR; I export all those images with a watermark, resized, etc. into a separate folder of proofs; even though I performed that batch process using LR, for some reason the app still won't see those images until I synchronize; when I do synchronize, it is shifting the color temp to +8 and the tint to -11; I then have to go back and undo that color temp shift.
How do I get LR to stop changing the color temp of images when synchronizing?
View 13 Replies
View Related
Sep 28, 2013
I am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies
View Related
Mar 24, 2004
I always thought that the pixel size of a bitmap image was driven by the resolution of the file. I have recently found that this isn't so.
Here is my situation:
I have an existing bitmap that when I zoom in to 1600% and measure the pixel size is .003". I don't have access to the original greyscale the bitmap was created from, and going back to greyscale, blurring, re-rezzing and converting back to bitmap is not prefered.
What I am looking for is any suggestions on how to change the pixel size of an existing bitmap. I am re-sizing several so they are all placed at the same size and I want all of the pixels or spots to be the same size.
View 3 Replies
View Related
May 21, 2013
I am updating my CUI ribbon for some of my customized buttons. I have changed some of the bitmap images that I have saved in my network folder for the network AutoCAD customization. However, I cannot get the Ribbon to update to show the new button images.
I have opened the CUI, browsed down to the partial CUI for our corporate configuration, then to the "Ribbon", then to the "Tabs", then to the individual section of the tab and clicked on it. Then I click on the specific button in the "Panel Preview" pane to get the properties for that button to show. Then at the bottom of the "Properties" panel, I click on the "Small Image" line to see the three dots that allow you to browse to where the .bmp is stored. I have not renamed the bitmaps, but just modified their color and the way they look. So I have to change the .bmp file to a different location in the small image properties, then change it back to the correct image name. It will update the appearance in the "Panel Preview", but will not update the actual ribbon. I click on "Apply" and "OK", and it still doesn't update the actual ribbon. I have tried closing and restarting AutoCAD after that. As a last resort, I rebooted to see if that would complete the change, but in vain.
I made sure that the network location for the bitmap files is listed in my Options > Support File Search Path (very near the top of the support file list), but that still isn't solving the problem.
How to get AutoCAD to completely forget the old image that is showing on the ribbon and repopulate it with the updated bitmap image?
View 1 Replies
View Related
Feb 19, 2003
I have to convert a CMYK image into a monochrome bitmap and I can't figure out how to do this in Photoshop.
In the menu under image - mode , there is only greyscale option, or if I choose bitmap, there is also no monochrome option.
View 6 Replies
View Related
Sep 7, 2006
I have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies
View Related