Is it possible to make a gradient over a defined path? For example from one end of an and-sign & to the other so that one is absolute dark and the other one white and so that this gradient is as if you would draw an and-sign with a pen constantly raising pressure on the paper so that it gets darker and darker?
It is for a logo in which one side should be really dark and the other one white.
Im trying to vexel hair.. First I tried a shape for each strand,but that looks crappy.. now im trying to stroke my path with the simulate pressure button. Looks better, but I also want to have a gradient, not only 1 stroke colour.. is this possible? If not, how do you fill your shape with a gradient?
View 5 Replies View Relatedhow to apply a gradient to a path or a shape.
View 9 Replies View RelatedI need to have a regular (linear) gradient but instead of going along a straight line, it should go along a custom made, freehand bezier path, observing all the turns or angles on that path.Is it possible in PS?
View 1 Replies View RelatedIs it possible to have a gradient follow a certain path or curve?
It seems the gradient tool will only go in a straigt line.
The letter "A" on the left is filled with a radial gradient. The letter "A" on the right is the same except I used offset path to expand the shape of the letter "A" but the gradient doesn't keep it's original coordinates and the outside shape of the offset "A" does not match the gradient of the original inside "A". I need the gradient to expand out with the same center coordinates as the gradient inside the original "A". I can't just scale the "A". I need both shapes of the "A" but filled with the same gradient.
View 9 Replies View RelatedI know Xara provides a range a built in gradient fills (e.g. linear, spherical etc), but does it have the ability to have a gradient follow the edge of an object?
View 9 Replies View RelatedHow do I make a gradient follow the curves of a path in a fairly simple manner? Like this image here:
View 7 Replies View RelatedI would like to apply a gradient inside closed path with black at the outside transitioning to white at the center. I
View 2 Replies View RelatedIt seems that gradient stroke only works as 'within stroke' for calligraphic brushes... and it's frustrating. I'm using CS6.
View 1 Replies View RelatedI'm trying to use the gradient annotator on a compound path. Moving the sliders and rotating the annotator works fine, but if I double click a slider and change the color the annotator disappears and the color of the slider stays the same. It works fine on non compound paths.
View 7 Replies View Relatedputting a crescent shape on a spiral path and applying a rainbow gradient?
View 9 Replies View RelatedTo summarize: It seems that compounding a path resets the rotation of the gradient to it's original degree of rotation.
Detailed version:
1. Create a shape.
2. Add a gradient fill. Note it's degree of rotation. Let's say it's set at 10°.
3. Now rotate the shape by any means (transform or rotate tool). Note the gradient degree of rotation has shifted the same amount as the shape was rotated (if it was rotated 50°, the gradient will show at 60°).
4. Make it a compound path.
5. Instantly the gradient shifts back to it's original degree of rotation of 10°.
It appears that when rotating a shape with a gradient, the rotation of the gradient is locked to the rotation of the shape. But when making it a compound shape it releases that lock and "remembers" it's original state. But that is only true as soon as you make it a compound path, but if you no go ahead and rotate it just a bit using the cursor (as opposed to selecting transform > rotate), the gradient will switch back to how you would expect it to rotate in the first place...
Workaround would be to make it a compound path before rotating the shape at all.
Is it possible to create a gradient similar to radial gradient, except that the shape is other than circular? This image would be the starting point, but I would like the white part fading to black to be another shape (say, a rectangle, a banana, etc.).
View 5 Replies View RelatedI've been experiencing problems with the Gradient editor since I got PS and the problem is that whenever I create a gradient through the gradient editor and then load it, it does load it and instead just duplicates the ones that already exist.
I save all gradients at:
C:UsersRHAppDataRoamingAdobeAdobe Photoshop CS6PresetsGradients
However it does (mostly) work when I import pre-made (from web) Gradients.
I don't know why this happens but it also did the same thing when I had CS5.5!
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I have a bunch of material libraries that need to be re-pathed as I have moved my textures, the Bitmap/Photometric paths editor has a tickbox that says "include material library" which leads me to believe that it will list, for re-pathing, all materials in my library.
However, it doesn't seem to do anything for me even though the library i need to re-path is loaded into my Material/map browser.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View Related