Photoshop :: Disappearing Color Profile When Saved For Web?
Nov 12, 2013
I have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.
View 10 Replies
ADVERTISEMENT
Feb 10, 2012
But I have and EP3 and am using Olympus Viewer 2 to manipulate the RAW images, I then edit the TIFFs in PaintShopPro 4. I have also calibrated my Dell 2410 with SpyderPro4.
My challenge is that the image edited in OV2 looks very different when viewed in PSP 4. I think the issue is that OV 2 is embedding a color space of "sRGB IEC61966" not the profile I set up using Spyder (as shown in the information screen of the resulting TIFF). when I open PSP it then says it is converting the "sRGB IEC61966" color space to my Spyder profile.
I have set OV2 to use Color Management and to "embed profile when saved". The monitor profile selected is my Spyder profile. Is this a bug? Is there a setting I should use in PSP4? Or si the problem on OV2?
View 1 Replies
View Related
Sep 5, 2006
I have to treat a few images for a newspaper, and I have to apply an specified Color Profile for them.
what's the difference between the commands "Assign Color Profile", "Convert to Color Profile" or doing "Mode>CMYK, and then Assign Profile",
View 9 Replies
View Related
Jul 25, 2012
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
View 6 Replies
View Related
Jan 16, 2013
I am running 2012 C3d and I am having an issue when a drawing is freshly opened, some of the profile data is not showing and it will show up after I sync the different information that is missing.when I run a publish of multiple projects that info doesn't show and I have to go into each project to sync the info and plot each sheet separately.
View 6 Replies
View Related
Dec 15, 2013
Working in Civil 3D 2014 SP1 I have a Design Profile that I have created by setting the Existing Profile to 'Static' and Creating a Copy of the Existing Profile... This leaves me with a Design Profile that follows the Existing Surface. The problem begins when I delete a section of PVI's and introduce new 'Design PVI's'... I have found that at apparently random times my Design PVI's have been lost and replaced with the original copied PVI's that follow the Existing Surface. This has occurred more than once and I can't find any reason as to why this may be occurring...?
Currently using Civil 3D 2013 & 2014 SP1
View 6 Replies
View Related
Dec 18, 2012
I have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies
View Related
Jan 9, 2009
use a Mac for PS, but I have Adobe Gamma installed as Control Panel on my Windows XP machine, so I can correct the monitor balance.
After I run the Wizard, I save a new sRGB Color Space Profile.icm in WindowsSystem32spooldriverscolor.
But every time I restart Windows, it resets itself, and my monitor balance is off - much too light.
How do you get Windows XP to load this profile each time?
View 1 Replies
View Related
Aug 13, 2012
I am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 4 Replies
View Related
Sep 30, 2013
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
View 2 Replies
View Related
Apr 6, 2013
I have multiple files that I am converting to PDF files to print and all of them converted fine except one. When I convert it to a PDF half of the color changes to black. I can't figure it out and I feel like I've tried everything! And this is what it looks like when I convert it to a PDF.
View 2 Replies
View Related
Mar 14, 2013
I consider myself an advanced CAD user and much of the evolution that hapenned since I started using CAD-14. However, one of the most annoying features introduced in CAD 2010 is the 'disappearing' layer dialog box once you go to select a color. So you open the layer, create a new one, go to select a color just before you assign it a linetype, lineweigth and make it current, but as soon as you open the 'select color' dialog box and hover over it the layer window just goes. I know you can just make sure you do the color selection last, but what if you want to create three different layers and assign them a color ? you have to open the layer window 3 times and look for your layers...
View 8 Replies
View Related
Jul 14, 2012
While I generally have moved to the new darker color scheme, I find that sometimes (depending on a number of factors), I like/prefer to work in the light color scheme.
It would be great if the color schemes could be assigned keyboard shortcut to toggle between themes, or if they could be saved in a Workspace.
View 3 Replies
View Related
Feb 15, 2012
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
View 4 Replies
View Related
Mar 14, 2008
I have block colour (or image) and text overlaid, fine. But save to Jpeg and the block color around the text becomes speckled. Other than saving as a higher quality what (if anything) can I do to prevent/minimise this?
While asking about text; is there any way to make the boundary of a text box irregular on one or two sides; say a box shape but jagged at one side so that text flows around a "protrusion"?
View 4 Replies
View Related
Jul 14, 2013
how do I access ase color swatches saved in photoshop for exchange into illustrator cs6
View 2 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Feb 17, 2014
When I save my AI file, it saves in the correct color scheme but when I go to look at it on a different computer, the color is off. The blues are greener etc.
View 7 Replies
View Related
Sep 20, 2013
I'm using Photoshop CS6 on Windows 7 Home Premium. I use Photoshop in conjunction with Lightroom 5.2. When I send an image from Lightroom to Photoshop, and then convert the profile from Photoshop,
I expect to see the option sRGB IEC6196-2.1. If I open the 32-bit version that option is there. However, when using the 64-bit version (which I have been using exclusively) I just recently discovered that the profile isn't there. Photoshop is suggesting converting to eSRGB instead, and the other profile isn't even in the list of available profiles. My printing both at home and from labs is acceptable as far as matching is concerned. But I'm wondering why I don't have that profile. Is there a way to add that profile to the list?
View 2 Replies
View Related
Sep 12, 2003
I re-installed Photoshop 7 after formating my PC and the first time i used it, a window appeard regardding some embedded color profiles. I choose an option without reading it carefully and now everytime i open an image the program asks me if i want to assign a color profile to the file or if i dont want it to color manage. Re-installing it again isn't helping and i can't find any way to arrange this problem.
View 1 Replies
View Related
Mar 24, 2013
I just got Paint dot net and started painting a picture right away. Now I want to use a color from the picture (in the same picture) but don't know how. After reading a bit, I realize I should have saved it in a palette. Is there any way to retrieve and use a color in a current picture that was not saved to a palette?
View 2 Replies
View Related
Mar 20, 2014
I removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies
View Related
Sep 17, 2012
I am using Photoshop CS6 13.0.1 x64 and I can't seem to get the settings for a new document to stick.
When I make a new document my color profile never matches my color settings (RGB: Adobe RGB (1998); CMYK: U.S. Sheetfed Coated v2; Convert to Working RGB; Convert to Working CMYK; Ask when opening), it always is reset to sRGB. Also, when I create a new document it doesn't seem to remember either what I used last or what is in my clipboard - it always resets to 1 x 67.
Is there some hidden setting I'm missing?
View 1 Replies
View Related
Jun 6, 2013
the new Photoshop Update CS6 13.0.5 changes the monitor color profile! Also brushes in Camera Raw are not availabe any more!
View 8 Replies
View Related
Apr 2, 2013
ou have to hover over the image to see the real images. The images embedded in the webpage have their profiles stripped -- just like photoshop does! Interesting.how photoshop doesn't support color profiles in png's.
But now I have a great one.this is with the correct color profile and displays correctly in firefox and probably other browsers -- also displays correctly on windows desktop and in large-icon view.
Ok, grab that image and try to read it into photoshop..I do, and get no warning on profile mismatch like I do on jpg's or tiff's:photoshop strips the existing profile and adds sRGB which isn't the correct profile. This is how photoshop transforms good colors into bad:
Completly screwed up.I have had multiple people notice how my png saved images from photoshop had "off" or bad colors -- usually washed out in comparison w/my monitor profile.I can get 'ok' results if I flatten the image and *convert* my existing profile to sRGB -- and I usually get something that looks 'acceptable'...though the jpg's render in accurate color.
Basically, photoshop can't read or write png web images. and maintain color fidelity unless they have no profile. Even if they have an sRGB profile, I usually get washed out looking pics if I don't strip it but let adobe convert it.
In googling for my own problem, I found references to this problem in Adobe Photoshop going back to 2002.They could fix it with a file plugin for existing CS5-6 users, but it really needs to get fixed and Adobe needs to stop ignoring this problem.I find this extra depressing because I prefer to distribute my pictures losslessly in png, but with photoshop, I'm left with lossy jpegs to get accurate color reproduction.
View 22 Replies
View Related
Aug 13, 2007
Since I've updated to a 22" LCD Screen I've run into a problem, and Im not sure exactly what is causing it. I'll do my best to explain the circumstances.
The problem Im having is managing the colour between what Im doing in Photoshop, and what is being produced on the web. For some reason, the brightness/gamma I have in photoshop is higher than what is being saved for web.
For example, Im working on a PSD file, get the brightness, saturation to exactly where I wanted it, then go "save for web" and as soon as the save for web dialog comes up. It's much "darker".
Here is a screenshot of the photo in photoshop, along with the image saved on the right in firefox.
I've checked the "Color Settings" in Photoshop, and the RGB profile is set to SRGB.
Now most people who view the photo, say it is "too dark". So im assuming that most peopels monitors view the image as too dark. So I need photoshop to view the image as "too dark", so I can tweak the brightness etc so that it becomes correct for most monitor.
Why would photshop show it slightly brighter, as soon as I hit "save for web", the colour Im seeing in the preview window is already "too dark".
It's almost like my default ICC profile is chagned to be too bright. Any help would be appreciated. I think when I installed my graphics card drivers, then Nvidia also ran a color profiler. I also insatlled the monitor drivers for my widescreen.
View 3 Replies
View Related
Dec 12, 2008
I use AdobeRGB1998 color profile for monitor and Photoshop.
When I have calibrate monitor I must use new color profile?
View 2 Replies
View Related
May 30, 2005
How can I preserve my colors so that when I export them to images, they are as close to the colors as I see them as when I view them in a browser?
Right now I'm using:
Adobe RGB 1998 for RGB Colorspaces (Preserve Embedded Profile)
Engine: Adobe ACE
Intent: Relative Colorimetric
[X] Use Blackpoint Compensation
[X] Use Dither (8bit/channel images)
View 3 Replies
View Related
Feb 9, 2013
So My wife and I got two new laptops (Toshiba Qosmio X875) after getting everything installed my wife noticed that all the images she has edited and uploaded (old and new) appear differently than they do in the editor. The color profile is set to RGB as I've read that's where it is supposed to be. She gets the same results when using Lightroom 4. I inserted a side by side screen shot below and you can see a difference where they should be identical.
View 1 Replies
View Related
Jun 12, 2012
I want to select the eciRGB profile as my default Working Space Profile. But in PS CS5.1 (Mac) I can select the predefined profiles only. I can't select 'other' and browse for the .ICC profile file.
How can I change it to eciRGB? Put all files into ColorSync folder and into Application Support/Adobe/Color..
View 2 Replies
View Related
Nov 10, 2012
Just installed Adobe Master CS6 on new installation of OSX Mountain Lion. Installation is ok but when i start Photoshop the color profile of monitor change (become more "cold").
View 3 Replies
View Related
