I have block colour (or image) and text overlaid, fine. But save to Jpeg and the block color around the text becomes speckled. Other than saving as a higher quality what (if anything) can I do to prevent/minimise this?
While asking about text; is there any way to make the boundary of a text box irregular on one or two sides; say a box shape but jagged at one side so that text flows around a "protrusion"?
I have CS1 i have saved a JPEG pic to PSD and when i upload it for an assignment the pic isn't aywhere, if i go to My Pictures it is there as a PSD file, even if i have saved the original to JPEG it wont open, i have altered the pic using LAB (converting a pic to balck and white).
View 11 Replies View RelatedI have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
I ran into this issue when saving black and white pictures from Raw file. Camera RAw 7.3 opens normally just like always and lets me save picture in color.It lets me save picture in BW, but the JPEG tha comes out is corrupted file that looks like this (see below):
When i try to open that corrupted JPEG in Photoshop 6 I get an error message saying:"The embedded ICC profile cannot be used because ICC profile is invalid. Ignoring the profile. "
what is causing JPEG to be saved incorrectly?
I have noticed a common trend among my .JPEG saves from Photoshop, they all seem to appear darker than when they were originally viewed and edited accordingly in Photoshop.
I don't know much about Color profiles and such, I have gone through the settings briefly, but do not want to mess anything up!
I've used photoshop to paint for many years (I'm a production artist for children's television) and never had this kind of thing before. It could be a total coincidence, but it seemed only to get like this since I upgraded to Production premium CS6.
I have the newest Nvidia drivers, the latest photoshop and production suite updates. I've tried turning off GPU acceleration and I've calibrated my monitors and cintiq several times using the Spyder 3 Elite calibration tools. I've created 8bit, 16bit and 32bit images and the problem persists no matter what. Other stats:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Video Card: NVIDIA GeForce GTX 280M
This is a 16bit image saved as a jpeg, but still a relatively accurate example of what I see in photoshop. In fact it looks better here. It was created using a low opacity brush with hardness set to zero.
I've edited, flattened all layers and saved it as jpeg in PS. Is there anyway I could restore the image to the original image?
View 4 Replies View RelatedShooting with a Nikon D70 in Raw mode - tweak in raw - looks good - open in PS CS2 - still looks good then save for web and the colors wash out dramatically(unacceptable). What gives?
if I can on account of the file being raw and the jpeg looking like yuck.
I would like to be able to shade certain rooms on a floor plan but still be able to read the text underneath.
Just a pale pastel shade on say the bathroom would be grand.
I shot some images in RAW, edited them in Photoshop, saved them as JPEG before sending to a client. When the client opened them on her computer there were two problems:
1)they came out dark, and
2) when she tried to upload them to her blog on the WordPress platform, she said they completely lost all the editing I had done.
I saved Raw files to jpeg via bridge but now some of the jpegs won't open in CS5, they only open in bridge? How do I get them to open up in photoshop instead?
View 3 Replies View RelatedI could change the file type to psd, they would open.
View 1 Replies View RelatedI opened and modified several JPEG images with Photoshop CS2. Now none of these files can be opened by Photoshop or any other program. All of the files seem to have a non-zero size, but when I try to open them in Photoshop, it does not generate an error, it merely offers to create a new file with the same image properties (size, etc) as the saved image on disk.
I've also tried several other programs to open these files, and none of them can open them. FYI, one thing that all of the files have in common is that they are all saved with the absolute minimum compression settings.
I am importing images saved in both Raw and JPEG format at the time of capture. There seems to be a color shift - toward green for the JPEGS and red for the Camera Raw images. Why is this happening?
View 4 Replies View Relatedmy default process is Adobe RGB. If I save a RAW image (Nikon D200) as a jpeg after adjustments in PS5.5, and I uncheck the "save as Adobe RGB" box, will the image be saved as an sRGB jpeg?
View 4 Replies View RelatedI'm using Photoshop CS5 on a mac. The photos saved in jpeg is only recognised by photo editing software. E.g. photos are unable to upload to facebook, nor view on a PC unless using paint.
View 4 Replies View RelatedI recently saved an image on Photoshop CS6 as a PNG file so I could send it as an attachment to a client (who uses a Windows computer). They told me the file wouldn't open and instead showed as an "Unknown File".
I tried opening the file on my Windows computer, as well as a JPEG version to test out, but both came up as "Unknown Files".
The only way I could transfer the files I saved in Photoshop was to export them as PNG through the 'Preview' application.
Is there a reason why these normal formats won't open properly?
Just come back from a lengthy trip with about 900 photos from 3 different cameras. Did most of the jpeg's in LR 5, but waited with the Canon raw files for PS CC. All appeared to go well, with first adjusting them in PS CC camera raw, then opening some on PS CC. Saved most in PSD format. However, some of the less important ones, such as information photos, were saved as jpegs, from within PS CC.
This is where the trouble started. Once finished, I went through them all in Bridge, using full screen preview. The ones saved as jpeg, appeared tiny, instead of full screen. Trying to open them, resulted in an error message, with something about a marker not being there. Before panicking, changed the extension from jpeg to psd - and the filed opened in PS CC without any problems. Saved the files as jpeg, using a different name and this time they were all ok.
So it would appear that there is a problem saving a file with layers as a jpeg, without first saving it as psd
I am trying to print a photo on my Canon MX870 that has been edited (cropped and a few slight lighting changes) in Elements 9 , the colours look good on the screen but when I print it looks different, . I have the colour settings from the Edit menu set to "always optimize for printing". The file information shows the camera data as colour space sRGB.
I am using canon inks (all full) and canon matte photo paper and I selected the matte photo paper on the paper type in printer settings.
I have printed good photos before on this printer (I think using photo gallery) but was not using photoshop elements at the time. Does it make any difference if the photo is saved as a jpeg file or a pse file?
I'm running LR4.3 and CS6 on an iMac. I open a raw file in LR4, then open in CS6 from Lightroom. Edit a little, save as a jpeg, close, and the file does not come back into Lightroom. Either in a folder or in the collection. TIF and PSD come in... but not jpeg.
So I try to import the image. It does not show up in the folder as a non imported image... or at all. Then, I open my hard drive from Finder, go into the folder and there it is.
I am looking to go through a whole drawing and change the text color of any block attribute to say 0 as the drawings I am receiving have all the text at a weird color. I was unable to find anything on the forum. I already have a routine that changes text of certain blocks based on layer, but I want this to change the color. Below is code I used for the layer change I talked about earlier.
publicstaticvoid strFind(string sFind, stringsReplace)
{
string str = "";
Document document = Application.DocumentManager.MdiActiveDocument;
Editoreditor = document.Editor;
Transactiontransaction = document.Database.TransactionManager.StartTransaction();
[code].......
I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
i cannot export my saved book to pdf or jpeg or blurb. Nothing works. If i start a new book , then it works but i would have to redo the entire layout.
View 5 Replies View RelatedMade a simple type and shape design with a solid backdrop. When I tried to export via save for web to jpeg with high settings, it came up online with subtle but visible alterations. Behind my shapes are speckled like dust, it looks super low quality.
I tried using ps to save instead, I even tried removing the backdrop and remaking a whole new document and just moving select items over, then recoloring..which was not the best attempt but same result.
I'm not exactly sure what her color settings should be to avoid this. Im working at 6500 x 6500 right now. Here's a visual of the up close issue. All over its less quality. And Im saving at top jpeg settings in RGB. I really don't want to tell her she has to begin all over again.
Every time I save a picture in Photoshop as a JPEG, then right click on it and say "open in Internet Explorer", nothing displays. I have to open the file up in MS Paint, overwrite it with "save as...", open it in IE, and only then does it display properly. I tried a whole variety of settings when saving as a JPEG but nothing seems to work. How do I fix this?
View 3 Replies View RelatedWhen I create a block in a drawing, where is it saved?
View 1 Replies View RelatedI have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.
While I generally have moved to the new darker color scheme, I find that sometimes (depending on a number of factors), I like/prefer to work in the light color scheme.
It would be great if the color schemes could be assigned keyboard shortcut to toggle between themes, or if they could be saved in a Workspace.
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
how do I access ase color swatches saved in photoshop for exchange into illustrator cs6
View 2 Replies View RelatedWhen I copy some text in Illustrator, say red text, and my color well is set to pink, the newly pasted text is now pink?
Here is a short video of the problem, me copying the top text and without changing anything, pasting it. Note the color-well is set to black
[URL]