I'm running LR4.3 and CS6 on an iMac. I open a raw file in LR4, then open in CS6 from Lightroom. Edit a little, save as a jpeg, close, and the file does not come back into Lightroom. Either in a folder or in the collection. TIF and PSD come in... but not jpeg.
So I try to import the image. It does not show up in the folder as a non imported image... or at all. Then, I open my hard drive from Finder, go into the folder and there it is.
I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
i cannot export my saved book to pdf or jpeg or blurb. Nothing works. If i start a new book , then it works but i would have to redo the entire layout.
I have CS1 i have saved a JPEG pic to PSD and when i upload it for an assignment the pic isn't aywhere, if i go to My Pictures it is there as a PSD file, even if i have saved the original to JPEG it wont open, i have altered the pic using LAB (converting a pic to balck and white).
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
I ran into this issue when saving black and white pictures from Raw file. Camera RAw 7.3 opens normally just like always and lets me save picture in color.It lets me save picture in BW, but the JPEG tha comes out is corrupted file that looks like this (see below):
When i try to open that corrupted JPEG in Photoshop 6 I get an error message saying:"The embedded ICC profile cannot be used because ICC profile is invalid. Ignoring the profile. "
I have noticed a common trend among my .JPEG saves from Photoshop, they all seem to appear darker than when they were originally viewed and edited accordingly in Photoshop.
I don't know much about Color profiles and such, I have gone through the settings briefly, but do not want to mess anything up!
I've used photoshop to paint for many years (I'm a production artist for children's television) and never had this kind of thing before. It could be a total coincidence, but it seemed only to get like this since I upgraded to Production premium CS6.
I have the newest Nvidia drivers, the latest photoshop and production suite updates. I've tried turning off GPU acceleration and I've calibrated my monitors and cintiq several times using the Spyder 3 Elite calibration tools. I've created 8bit, 16bit and 32bit images and the problem persists no matter what. Other stats:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64 Operating System: Windows 7 64-bit Video Card: NVIDIA GeForce GTX 280M
This is a 16bit image saved as a jpeg, but still a relatively accurate example of what I see in photoshop. In fact it looks better here. It was created using a low opacity brush with hardness set to zero.
Shooting with a Nikon D70 in Raw mode - tweak in raw - looks good - open in PS CS2 - still looks good then save for web and the colors wash out dramatically(unacceptable). What gives?
if I can on account of the file being raw and the jpeg looking like yuck.
I shot some images in RAW, edited them in Photoshop, saved them as JPEG before sending to a client. When the client opened them on her computer there were two problems:
1)they came out dark, and 2) when she tried to upload them to her blog on the WordPress platform, she said they completely lost all the editing I had done.
I saved Raw files to jpeg via bridge but now some of the jpegs won't open in CS5, they only open in bridge? How do I get them to open up in photoshop instead?
I have block colour (or image) and text overlaid, fine. But save to Jpeg and the block color around the text becomes speckled. Other than saving as a higher quality what (if anything) can I do to prevent/minimise this?
While asking about text; is there any way to make the boundary of a text box irregular on one or two sides; say a box shape but jagged at one side so that text flows around a "protrusion"?
I opened and modified several JPEG images with Photoshop CS2. Now none of these files can be opened by Photoshop or any other program. All of the files seem to have a non-zero size, but when I try to open them in Photoshop, it does not generate an error, it merely offers to create a new file with the same image properties (size, etc) as the saved image on disk.
I've also tried several other programs to open these files, and none of them can open them. FYI, one thing that all of the files have in common is that they are all saved with the absolute minimum compression settings.
I am importing images saved in both Raw and JPEG format at the time of capture. There seems to be a color shift - toward green for the JPEGS and red for the Camera Raw images. Why is this happening?
my default process is Adobe RGB. If I save a RAW image (Nikon D200) as a jpeg after adjustments in PS5.5, and I uncheck the "save as Adobe RGB" box, will the image be saved as an sRGB jpeg?
I'm using Photoshop CS5 on a mac. The photos saved in jpeg is only recognised by photo editing software. E.g. photos are unable to upload to facebook, nor view on a PC unless using paint.
I recently saved an image on Photoshop CS6 as a PNG file so I could send it as an attachment to a client (who uses a Windows computer). They told me the file wouldn't open and instead showed as an "Unknown File".
I tried opening the file on my Windows computer, as well as a JPEG version to test out, but both came up as "Unknown Files".
The only way I could transfer the files I saved in Photoshop was to export them as PNG through the 'Preview' application.
Is there a reason why these normal formats won't open properly?
Just come back from a lengthy trip with about 900 photos from 3 different cameras. Did most of the jpeg's in LR 5, but waited with the Canon raw files for PS CC. All appeared to go well, with first adjusting them in PS CC camera raw, then opening some on PS CC. Saved most in PSD format. However, some of the less important ones, such as information photos, were saved as jpegs, from within PS CC.
This is where the trouble started. Once finished, I went through them all in Bridge, using full screen preview. The ones saved as jpeg, appeared tiny, instead of full screen. Trying to open them, resulted in an error message, with something about a marker not being there. Before panicking, changed the extension from jpeg to psd - and the filed opened in PS CC without any problems. Saved the files as jpeg, using a different name and this time they were all ok.
So it would appear that there is a problem saving a file with layers as a jpeg, without first saving it as psd
Made a simple type and shape design with a solid backdrop. When I tried to export via save for web to jpeg with high settings, it came up online with subtle but visible alterations. Behind my shapes are speckled like dust, it looks super low quality.
I tried using ps to save instead, I even tried removing the backdrop and remaking a whole new document and just moving select items over, then recoloring..which was not the best attempt but same result.
I'm not exactly sure what her color settings should be to avoid this. Im working at 6500 x 6500 right now. Here's a visual of the up close issue. All over its less quality. And Im saving at top jpeg settings in RGB. I really don't want to tell her she has to begin all over again.
I am trying to print a photo on my Canon MX870 that has been edited (cropped and a few slight lighting changes) in Elements 9 , the colours look good on the screen but when I print it looks different, . I have the colour settings from the Edit menu set to "always optimize for printing". The file information shows the camera data as colour space sRGB.
I am using canon inks (all full) and canon matte photo paper and I selected the matte photo paper on the paper type in printer settings.
I have printed good photos before on this printer (I think using photo gallery) but was not using photoshop elements at the time. Does it make any difference if the photo is saved as a jpeg file or a pse file?
Print to JPEG in LR5.2 produces a corrupt JPEG file that cannot be opened.
Lightroom is running on MacPro. When printing I am attaching an ICC profile provided by the bureau that is going to produce the prtins. Having said this the file cannot be opened neither on a Mac nor on a Windows PC.
Up until now, i used to exported as TIFFs but after reading Jeff Schewe book The Digital Print i have become convinced that printing through LR to a file is much more efficient.
If I shoot RAW + JPEG, and I add EXIF data to the JPEG files outside of Lightroom, when I import the RAW + JPEG pairs will the metadata I added to the JPEG files still be there?
I'd try it myself, but I don't actually have the equipment to do this right now.
I'm trying to export a JPEG so that the file size is smaller, for use on the web. So the file I have is 1.1 MB. I try to export via LR4 using the percentage slider, but no matter what percentage I use, the file size is always GREATER than 1.1 MB! And if I try to limit the size by inputing a value, say 1000 kb, I get an error message saying I can't do that for some reason:
Also, this is not the case with just one file, it is numerous files.
I want to shoot tethered in studio, and shoot RAW + JPEG, but I want Lightroom to only import the JPEGS so as to improve the speed. I shoot a Canon 7D.
Every time I save a picture in Photoshop as a JPEG, then right click on it and say "open in Internet Explorer", nothing displays. I have to open the file up in MS Paint, overwrite it with "save as...", open it in IE, and only then does it display properly. I tried a whole variety of settings when saving as a JPEG but nothing seems to work. How do I fix this?
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
