Lightroom :: Exported JPEG Always Larger Than Original JPEG
Jun 25, 2012
I'm trying to export a JPEG so that the file size is smaller, for use on the web. So the file I have is 1.1 MB. I try to export via LR4 using the percentage slider, but no matter what percentage I use, the file size is always GREATER than 1.1 MB! And if I try to limit the size by inputing a value, say 1000 kb, I get an error message saying I can't do that for some reason:
Also, this is not the case with just one file, it is numerous files.
i just noticed that changing the PPI from 240 (taken with my Canon) to 100 and exporting the photos to JPEG sized as 2MP have no change at all in size. Shouldn't 100PPI be smaller in size?
I'm having the issue where after working with RAW images and having exported them to JPEG they come out dull and less saturated.
I'm running Windows 7, LR 5.2. My monitor has been professionally calibrated, and I'm using Irfanview to view the jpegs afterwards. I've also made sure that I'm saving them in sRGB.
I would like the caption or title to show as an overlay on exported jpeg files. How do I do it? Do I need to do it in Photoshop or can I directly do it in Lightroom 5 CC.
In CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
I have been playing around with the exporting options to a JPEG file (such as low sharpening, high sharpening, etc.). However I did not track what I was doing diligently as I assumed I could "read" it later. For example, a particular picture has 4 exports several minutes apart. I can line up each export based on exported name and time stamp. But I can't tell what options I selected during the exporting process. Is there a way to find out what export options I selected for a particular export? No other develop changes were made, just playing around with the export options.
When I import a 26.8 MB (5616 x 3744) CR2 RAW file from a Canon 5DMKII into Lightroom 4.4 and then export it as a JPEG sRGB Quality 100 file, it's size is 13.4 MB. When I do the same thing in Aperture 3.4.3 the exported JPEG file size is 20.8 MB. Am I doing something wrong in Lightroom?
I just started using Lightroom 4.1 Trial version (coming from Aperture). I exported JPEG versions of some images using an ICC profile. On my iMac running Lion 10.7.5 the pictures do not show a thumbnail, the file on the desktop just shows "JPEG". I could not open the file with the Preview App, but I am able to open it with DPP (Canon software)? Also the file shows that it has 0 x 0 dimentions when I click Get Info even though it is about 25 Megs in size?
The message I get is "The file “Edit-739820120223Canon EOS 7D.jpg” could not be opened. It may be damaged or use a file format that Preview doesn’t recognize."
I'm starting with the corrected JPEG and then highlighting the original video so they are both selected, but the JPEG settings are not applied to the video when I Sync Settings -- things like color, sharpening, and noise reduction.
LR 3.6 has serious limitations causing what should be an easy task hours to trouble shoot. Exporting original size JPEG images to DVD should be a no brainer but the application was not built to handle MS OS 7 64bit. Choice is to upgrade to LR v 4 but will it work?
I cannot seem to exprt my images and retain the orginal jpeg file number once I have watermarked them... I choose the "save with original file number" option in the drop down list but it still exports them with new numbers. How do I keep my original numbers?
Print to JPEG in LR5.2 produces a corrupt JPEG file that cannot be opened.
Lightroom is running on MacPro. When printing I am attaching an ICC profile provided by the bureau that is going to produce the prtins. Having said this the file cannot be opened neither on a Mac nor on a Windows PC.
Up until now, i used to exported as TIFFs but after reading Jeff Schewe book The Digital Print i have become convinced that printing through LR to a file is much more efficient.
If I shoot RAW + JPEG, and I add EXIF data to the JPEG files outside of Lightroom, when I import the RAW + JPEG pairs will the metadata I added to the JPEG files still be there?
I'd try it myself, but I don't actually have the equipment to do this right now.
I want to shoot tethered in studio, and shoot RAW + JPEG, but I want Lightroom to only import the JPEGS so as to improve the speed. I shoot a Canon 7D.
what settings or option do I need to take, if I want to save my .PSB as a JPEG and want to avoid reducing the size down to 30.000px. Actually I do not care if some editors won't be able to handle JPEGs larger than 30.000px. I just want to produce one with 39.000px, and can't imagine PS won't allow me to do that.
I have a problem in Gimp I exported a picture as a Jpeg because it fudged up when I saved it to the normal Gimp format. After I opened it again boom all the layers had gone gimps so annoying the more I use it the worse it gets. How to get the layers back that would be good.
This is probably a ridiculously simple thing. I have just started with Xara Photo and Graphic designer 7, and gone through the vids. I am finally acknowledging that Adobe Image Styler (my sweet baby!) is going to have to be given up. Coming from that, I am finding Xara more challenging to use.
When I save an image (jpeg), it exports with a tiny white line around it. I am trying to make a gradient image for a website, and need the edges to blend when I have it repeated (background image).
I exported images in JPEG format. To get a quick view, (TV Toshiba) I loaded several images on a USB key . To my suprise I could not see the photo edited with Gimp .
I made a test. I made the same action (crop) on the same images with different retouching programs. Than I exported the images in JPEG, loaded on USB key, to see them on TV screen . The software I tested
I'm running PSPX3. the effect of no compression (or compression factor = 1) on saving files. I've got a JPEG image file straight from my camera that's approximately 4.1MB in size. If I do nothing else but "Save As" with a compression factor of 1, the new file size is approximately 50% larger, or 6.2MB. What has changed to make the file size larger? Both images are still 72DPI, 3648X2736px. I can't image that I have done anything to "improve" image quality, so why did the file size increase?
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
Is there a way to export a document @ a different resolution than 72DPI? I know I can set the horizontal/vertical scale to save it at a larger dimension at 72DPI, but I need the file to be actual size and 300DPI.
This is part of a larger process, and I'd prefer to do the entire process from Illustrator, and not have to open the files in Photoshop to change the size/resolution.
Also, is it possible to change the color mode to CMYK or Greyscale for the exported Jpeg?
I am trying to crop and straighten my 35mm slide scans. When I imported the scans the average file size was 5mb but after cropping and straightening the scans in lightroom 5 and exporting them, the average file size was 15mb! There is no increase or decrease in quality.
I am adjusting colours on photos with Photo Paint X6. When I try to save with original settings the OK button in the "Export to JPEG" dialog box is grayed out. There are no error messages or hints on the screen as to what to do to proceed with the save JPEG with orginal settings.
1) From LR export to PS 2) Do all essential editings. 3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy) 4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg' 5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'. 6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
I got a new computer (Windows 7) at work this April and as of today, when I work on any of my JPEG images in PS CS5,suddenly it has defaulted its "Save As" to JPEG2000. How did this default change and how do I get it to default save as. JPEG again? There was nothing I noticed and no warning as to why this has changed, I didn't touch a thing!
(Last week, Adobe had to work with our IT manager to fix a problem that started occuring with my new Adobe Acrobat Pro 11 program. They had to log into my computer and change a registry thing to get it to work properly again...also something that changed without warning!!)
I'm using a Mac. My windows friend sent me a jpeg of a piece of art we're working on. It looked fine in the web browser. It looked fine in Preview when I opened it, and it looked fine in Photoshop. But when I save it from photoshop after adding just a small thing to the image, the whole thing comes out a bit brighter. I have no idea what's doing it. I've tried Save For Web and Save As and it comes out the same each time. I have played with color settings in the past slightly, but it was my understanding that only affected how photoshop displays the image and I wouldn't expect it to change an image I imported then exported again.
this is in regards to a Lightroom 3.5 exported JPG. This was a year ago when I had been told it was best to export files with simple renumbering of them from 1 to x... instead of retaining the original RAW 4-digit file name.
I've currently lost the original files, and need to do a search for them via these 4 digits to see if I have them tucked away in any of my drives. I downloaded a metadata explorer, and it's telling me all the lightroom editing information, and everything else, but somehow does not have the simplest of information — that 4 digit original file name.
Am I grasping at straws or is there likely to be any way to find this information out? I don't work with metadata, so there wouldn't have been any customizations to how Lightroom configures this...
I edited some tiff files and then exported them as jpg files to a different folder. I want to go back and work on some of the original tiff files but they no longer show up in the lightroom library or develope modules even though they are still on the disk. Lightroom sees the original files in the import dialogue but will not let me reimport them either. The exported jpg files are shown in the library module. How can I work on the original tiff files.
