GIMP :: Unable To View Exported JPEG Images
Jan 28, 2014
I exported images in JPEG format. To get a quick view, (TV Toshiba) I loaded several images on a USB key . To my suprise I could not see the photo edited with Gimp .
I made a test. I made the same action (crop) on the same images with different retouching programs. Than I exported the images in JPEG, loaded on USB key, to see them on TV screen . The software I tested
Gimp 2.8 - ViewNX2 Nikon - Xnview - Capture NX2 - Photoshop - view
I got confirmation, images from Gimp were not recognized while all the other could be seen very well.
View 3 Replies
ADVERTISEMENT
Feb 2, 2014
I seem to be unable to rename either layers or images if they are being exported. When I use alphabet letters to rename a layer, for example, GIMP toggles through tools. It is using shortcuts to open different things? . I have something checked or unchecked that will allow alphabetic renaming....where do I look ?
View 4 Replies
View Related
May 10, 2012
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies
View Related
Apr 5, 2014
I'm having the issue where after working with RAW images and having exported them to JPEG they come out dull and less saturated.
I'm running Windows 7, LR 5.2. My monitor has been professionally calibrated, and I'm using Irfanview to view the jpegs afterwards. I've also made sure that I'm saving them in sRGB.
View 14 Replies
View Related
Oct 26, 2012
I have a problem in Gimp I exported a picture as a Jpeg because it fudged up when I saved it to the normal Gimp format. After I opened it again boom all the layers had gone gimps so annoying the more I use it the worse it gets. How to get the layers back that would be good.
View 3 Replies
View Related
Apr 14, 2013
I've noticed recently that when I use the EXPORT command to create a JPEG, the resulting image colors of the EXPORTed JPEG are deeper (certainly more saturated) and the contrast over the entire image is much higher. The image looks nothing like what it looks like in GIMP prior to export.
I've tried EXPORTing to TIFF and I get the same results (JPEG looks exactly like the TIFF, just a different file size). Is it a possible ICC Profile mismatch (i.g. not having one set specifically inside GIMP)?
View 3 Replies
View Related
Jan 3, 2014
It is convenient to add each image name as a text on each figure by Slideshow. Could I use each image name as the exported file name?
View 6 Replies
View Related
Jun 25, 2012
I'm trying to export a JPEG so that the file size is smaller, for use on the web. So the file I have is 1.1 MB. I try to export via LR4 using the percentage slider, but no matter what percentage I use, the file size is always GREATER than 1.1 MB! And if I try to limit the size by inputing a value, say 1000 kb, I get an error message saying I can't do that for some reason:
Also, this is not the case with just one file, it is numerous files.
View 5 Replies
View Related
May 11, 2008
I opened and modified several JPEG images with Photoshop CS2. Now none of these files can be opened by Photoshop or any other program. All of the files seem to have a non-zero size, but when I try to open them in Photoshop, it does not generate an error, it merely offers to create a new file with the same image properties (size, etc) as the saved image on disk.
I've also tried several other programs to open these files, and none of them can open them. FYI, one thing that all of the files have in common is that they are all saved with the absolute minimum compression settings.
View 1 Replies
View Related
Feb 23, 2013
I have installed CS6 trial version and an unable to view opened images (jpg, psd). Bottom of screen sayd "waiting for Bridge CS 6". What do I need to view my images?
View 3 Replies
View Related
Dec 12, 2011
Importing images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
View 2 Replies
View Related
Feb 20, 2013
I'll try to write this logically, but as logic has failed to get me the output I want, I suspect somewhere there will be something highly illogical...
I am trying to export a JPEG file, complete with images. I have setup the original file to 2362x602 pixels, at 300 ppi (making a canvas approximately 200x50mm). This is confirmed through Image -> Canvas Size.
Now if I want to print to paper, I can check the settings through Image -> Print Size, to confirm what size I will get.
What I want is to be able to do the same thing for an export jpg function. I need the JPG to come out at a specific dimension, not a specific pixel size. If I export my file now (File -> Export) as a jpg, I end up with a jpeg much wider than 200mm. A quick rightclick->properties shows me the jpg is still 2362x602 pixels, at '300dpi.' So why is that not the size I expect it to be?
View 3 Replies
View Related
Feb 27, 2012
I've recently installed X4 (running it on Windows 7) and for some reason when I open the scrapbook I can't preview any of the thumbnails - they just appear as a generic symbol (see below). How do I change this so that I can view the thumbnails properly?
I've also changed the settings so that once a bitmap has been inserted, I should be able to double-click to open the bitmap in Photo paint - but this doesn't work either!
View 2 Replies
View Related
Sep 16, 2012
Ever since transferring all my files to a new computer, I have been unable to permanently overwrite any images opened in Gimp 2.2 nor 2.6. Worse, any image or even folder created through Gimp does not show up in the Windows directory folder. (but, strangely does if viewed through Gimp itself...)
The images are still changed from the last time were I last left off, but on rare occasions, usually after altering Windows User Controls, the images revert to the appearance of when they were uploaded to the computer(around 12/17/11 according to the files). Luckily, they revert back to my last known save (Yesterday) if a System Restore is initiated.
The images in question are .GIF images and they were imported from Windows Xp to 7.(whom I highly suspect is the problem) The Gimp version I use is 2.2.
View 7 Replies
View Related
Mar 30, 2012
I heard many good things about Gimp so I downloaded it, eager to begin editing my photos. But for the last 30 minutes, I have been unable to even upload an image to begin editing. I've tried everything, but no matter what, my images will not "drag and drop" like they're supposed to. I am getting more and more frustrated by the second. I read it might be the fact that it's a "jpg" file,so I tried renaming it, as suggested, still, no luck! I'm using a Mac Os X 10.6.8
View 1 Replies
View Related
Jul 5, 2013
i just noticed that changing the PPI from 240 (taken with my Canon) to 100 and exporting the photos to JPEG sized as 2MP have no change at all in size. Shouldn't 100PPI be smaller in size?
View 4 Replies
View Related
Aug 31, 2012
I'm trying to work with TIFF images got from Image Pro Plus butGIMP 2.8 doesn't open them, I found that's a problem related to Image ProPlus because misses some tags. Also, I tried with ImageMagick using:
convert "prueba 1.tif" "prueba 1.png"
convert "prueba 1.tif" "prueba 2.tif"
The first works fine, just with some warnings, PNG image was createdsuccesfully.
The second doesn't work and in any case if I do:
convert "prueba 1.tif" -identify
got:
convert: incorrect count for field "DateTime" (27, expecting 20); tagtrimmed. `prueba 1.tif'.
convert: prueba 1.tif: unknown field with tag 40001 (0x9c41) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50288 (0xc470) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50291 (0xc473) encountered.`TIFFReadDirectory'.
Original image got from Image Pro Plus: [URL]
View 4 Replies
View Related
Oct 27, 2010
I am using an r1900 Epson a3 printer. I am trying to print my images on A3 paper however no matter what settings i change they always appear as a4. I have change the scale, fit to canvas and page set up all with no effect.
View 1 Replies
View Related
Oct 14, 2011
I have two different images. Both are set at Height and Width: 7 by 10.5 inches. However, whenever I view them, the one is always bigger than the other one. Does this have something to do with the pixel dimensions? I see that the pixel dimensions of the one is much larger.
View 1 Replies
View Related
Mar 23, 2012
This is probably a ridiculously simple thing. I have just started with Xara Photo and Graphic designer 7, and gone through the vids. I am finally acknowledging that Adobe Image Styler (my sweet baby!) is going to have to be given up. Coming from that, I am finding Xara more challenging to use.
When I save an image (jpeg), it exports with a tiny white line around it. I am trying to make a gradient image for a website, and need the edges to blend when I have it repeated (background image).
View 9 Replies
View Related
Aug 9, 2013
I would like the caption or title to show as an overlay on exported jpeg files. How do I do it? Do I need to do it in Photoshop or can I directly do it in Lightroom 5 CC.
View 12 Replies
View Related
Sep 17, 2012
In CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
View 4 Replies
View Related
Jul 31, 2013
I have been playing around with the exporting options to a JPEG file (such as low sharpening, high sharpening, etc.). However I did not track what I was doing diligently as I assumed I could "read" it later. For example, a particular picture has 4 exports several minutes apart. I can line up each export based on exported name and time stamp. But I can't tell what options I selected during the exporting process. Is there a way to find out what export options I selected for a particular export? No other develop changes were made, just playing around with the export options.
View 1 Replies
View Related
Oct 17, 2011
Many of my fonts become pixelated when I export them as jpeg. I use 72dpi, default settings. How can I correct that? My photos stay clean though.
View 2 Replies
View Related
Apr 29, 2013
When I import a 26.8 MB (5616 x 3744) CR2 RAW file from a Canon 5DMKII into Lightroom 4.4 and then export it as a JPEG sRGB Quality 100 file, it's size is 13.4 MB. When I do the same thing in Aperture 3.4.3 the exported JPEG file size is 20.8 MB. Am I doing something wrong in Lightroom?
View 1 Replies
View Related
Oct 1, 2012
I just started using Lightroom 4.1 Trial version (coming from Aperture). I exported JPEG versions of some images using an ICC profile. On my iMac running Lion 10.7.5 the pictures do not show a thumbnail, the file on the desktop just shows "JPEG". I could not open the file with the Preview App, but I am able to open it with DPP (Canon software)? Also the file shows that it has 0 x 0 dimentions when I click Get Info even though it is about 25 Megs in size?
The message I get is "The file “Edit-739820120223Canon EOS 7D.jpg” could not be opened. It may be damaged or use a file format that Preview doesn’t recognize."
View 14 Replies
View Related
Jun 6, 2013
Is there a way to export a document @ a different resolution than 72DPI? I know I can set the horizontal/vertical scale to save it at a larger dimension at 72DPI, but I need the file to be actual size and 300DPI.
This is part of a larger process, and I'd prefer to do the entire process from Illustrator, and not have to open the files in Photoshop to change the size/resolution.
Also, is it possible to change the color mode to CMYK or Greyscale for the exported Jpeg?
View 7 Replies
View Related
Oct 4, 2012
Just got PS CS6 and Illustrator CS6 and went on to edit some pics of my cat. Only to find out that my Lightroom 3.6 doesn't seem to find PNG files exported from RAW using PS CS6.
Is this normal and I have to cough up some more for LR4?
View 3 Replies
View Related
Jul 3, 2005
Recently, whenever I "Save for Web", the resulting images appear to be tinted (i.e. the colors are not the same as they appear in Photoshop). This applies to both GIFs and JPEGs. However, when I load the saved GIF or JPEG in Photoshop, the colors look just like the original PSD. I have tried saving with "Standard Windows Color", "Uncompensated Color", "Standard Mac Color", and "Document Color Profile", but there does not appear to be any difference between any of the above when the file is viewed outside of Photoshop. I have had Photoshop for some time and I never encountered this issue before. Did I change something in my settings by mistake?
View 8 Replies
View Related
Oct 18, 2012
I am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
View 5 Replies
View Related
Jun 19, 2013
I just purchased LR5 as an upgrade from 4. I was noticing my images were quite smooth when exporting to Jpeg with LR4. It seems now there is alot more graininess that wasn't the issue before.
View 4 Replies
View Related
