I have installed CS6 trial version and an unable to view opened images (jpg, psd). Bottom of screen sayd "waiting for Bridge CS 6". What do I need to view my images?
View 3 RepliesI exported images in JPEG format. To get a quick view, (TV Toshiba) I loaded several images on a USB key . To my suprise I could not see the photo edited with Gimp .
I made a test. I made the same action (crop) on the same images with different retouching programs. Than I exported the images in JPEG, loaded on USB key, to see them on TV screen . The software I tested
Gimp 2.8 - ViewNX2 Nikon - Xnview - Capture NX2 - Photoshop - view
I got confirmation, images from Gimp were not recognized while all the other could be seen very well.
Importing images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
I've recently installed X4 (running it on Windows 7) and for some reason when I open the scrapbook I can't preview any of the thumbnails - they just appear as a generic symbol (see below). How do I change this so that I can view the thumbnails properly?
I've also changed the settings so that once a bitmap has been inserted, I should be able to double-click to open the bitmap in Photo paint - but this doesn't work either!
I am unable to open a jpg as a jpg once it has been opened——and NOT adjusted--- in raw. either can I open it as a jpg from within CS5 where it selects it from the Finder. Am I missing something or is this just the way CS5 has been designed?
View 4 Replies View RelatedI ahve been happily using my photoshop but recently all my images are greyed out with small white and grey boxes so cannot view or change. I have clicked on the imagine open section in history and it makes not difference.
View 5 Replies View RelatedRAW images opened in CS2, Bridge or Lightroom have bands of different colors depending on the image and are unusable. Running Windows Vista 32 on Dell Desktop 531 w/2g of ram. Have been searching but haven't found a solution. I have not called Adobe yet.
Lightroom stopped running on Vista 32 windows error message says "Lightroom has stopped running windows is searching for a solution to the problem". At the same time Lightroom works fine on my laptop running Vista 32.
I have new laptop with Photoshop cs4. I have a Nvidia Geforce GTX 660M 2G hard drive in the lap top. The colors look great in everything but Photoshop. Everything in Photoshop has a yellowish almost sepia toned tint. I have been trying to figure out what is wrong for several day... (and several hours for several days). I understand that Photoshop color corrects, but if I have de-saturated an image why does it still look sepia in Photoshop and B&W everywhere else?
View 6 Replies View RelatedMy images are going gray when I open them.
View 1 Replies View RelatedI'm used to open my photos as smart objects. So I open them in Camera Raw, edit and open in Photoshop CS6 as smart objects.
My issue is:
In CS6 when I double click the photo and open it again in Camera Raw, I can't find a way to save the edits. I mean, if I close the photo in CS6 and open it again, Camera Raw keeps only the edits I made the very first time I opened the photo.
Why do images opened in CR coming with PS CC always show 2 EV to bright? The same images opened with CR coming with my PS CS6 on another machine open almost perfect every time.
View 1 Replies View RelatedI was using Photoshop CS5 (64-bit) fine yesterday but today each image I open shows a loss of colour, everything looks like a blue tinted grayscale.The same with RAW files opened in ACR and all files opened in Bridge.When I open a JPEG version in Microsoft Image Viewer the colour is fine.In Windows, the thumbnails look fine with full colour in the folders.The loss of colour only happens when the image files are opened in Photoshop, Bridge and ACR.
View 9 Replies View RelatedThe following message appears when attempting to install the trial version of PSE12 onto an iMac.."The following disk images could not be opened - Photoshop Elements_12_WWEFDJ.dmg error -4960"...The installer then hangs with the install extractor and does not respond.
View 8 Replies View RelatedCS6 "Unable to set maximum number of files to be opened." Just got the production bundle and installed everything on both my macs, everything works fine besdies illustrator which only works fine on one not at all on the other.
View 2 Replies View RelatedSince installing Creative Suite 5 in 2010 I have never been able to open Illustrator.All programs work but 'Ai'.I've tried re-installing it multiple times with no success.
The message that occours when trying to open the program is:'Unable to set maximum number of files to be opened'. And then it generates a 'Problem Report for CS5 Adobe Illustrator'.
I have installed Adobe Illustrator but when I launch it I get an error message; "Unable to set the maximum number of files to be opened". When I click OK to close the error message the program will not open.
View 1 Replies View RelatedThe message 'Unable to set maximum numbers of files to be opened' is what appears when I try to open Illustrator, which is a part of my CS5 set up.
I've tried reinstalling CS5 several times but have had no success with getting illustrator to open. After this message appears it then says 'adobe has quit unexpectedly' click to reopen/ bug will be reported to apple. I've asked adobe for support resolving this issue a number of times...
I have just moved over to Photoshop CS6 from Elements 10. One thing I can't work out how to do is to have PS automatically convert opened files to RGB, exactly like PSE does.
View 8 Replies View RelatedImages opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies View Relatedtoday i'm using a batch file to load paint.net with the images name in the command line.
(this is my workaround)
however since i add images , I sometime forget to add those image names to the batch file, and they do not load.
so is there a way to add to paint.net the option to automatically load upon start the " last open images"
ie. the last images that were open before the program exited ?
I recently upgraded to PhotoshopCS5.5 and find that I can't print on my HP Photoshop Premium printer. I'm using a MacBook Pro with Mac OSX 10.6.8. I also am unable to open 2 images at the same time.
View 3 Replies View RelatedI made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
We used to use version 4 at work and loads of images drawn, my boss has converted to version 12 but when we open the drawings now all the text is in the wrong place and too big etc.
I have been given the task of fixing them all and wondered if there was an easy fix rather than clicking on each text box and changing each bit one by one, sitting with my fingers crossed.
I upgraded to PaintShop Pro X4 from PSP v9.0 and I noticed images are not opened in their own separate windows anymore? I need the ability to open an image in its own window and drag it around the workspace ...how to enable this in PSPX4 ??
View 8 Replies View RelatedSome of the images I have taken with my Olympus 7010 still camera, when opened up in PSPro X, are not showing correctly.A portion of the image is sectioned and the smaller part of the image has moved along horizontally, the effect being that for instance, a person's head is not on the body but further along the image. This only happens now and again but is annoying, the last time 2 out of 24 images were like this.They were loaded on to my pc via the camera's card,in a card reader.
View 6 Replies View RelatedThe following code will explain how it works:
[CommandMethod("RenderFromFile")]public static void RenderFromFile(){string dwgPath = @"C:TempRender.dwg";string imagePath = @"C:TempRender.png";Document doc = Application.DocumentManager.Open(dwgPath);RenderToFile(doc, imagePath);}
[Code]....
The command RenderFromFile will render the 3D drawing file at C:TempRender.dwg (see this file from attachment), and then write the output image to Render.png at the same folder. The rendered image is on the top view and has visual materials.
The command RenderCurrentView will render the current open 3D drawing, then write the output image to C:TempRender.png. The rendered image is on 3D view and does not have visual materials.
Both two commands call the same shared method RenderToFile(), but their output images are different. I don't know why they are different?
Method RenderToFile is a simplified version from Kean's code. I try to make the code short and simple to easily solve the problem.
Images that are opened or psds that are imported are resized into an artboard that is smaller then the image. With raster image formats, the following behavior occurs:
For a jpg that is 1000x800px an artboard is opened at 1000x800px and an additional artboard at 360x288px with the actual raster image is created.
When I open a high resolution image in Ai they look somewhat distorted and choppy. They are jpeg files that I am placing in order to envelope distort onto a mesh. For some reason any bitmap image I open with Ai looks like this. However, when I open the same image with Acrobat Pro or Ps the image looks perfect. Images are RGB in both apps.
Image in Ps or Acrobat Image in Illustrator
There most be something in Illustrator that is causing this. Images are being embedded and cannot be linked since they need to be distorted. I am runnung CS6 on Intel iMac Maveriks.
I am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies View RelatedI've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedLightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.