Photoshop :: Color Profile Support In PNG
Apr 2, 2013
ou have to hover over the image to see the real images. The images embedded in the webpage have their profiles stripped -- just like photoshop does! Interesting.how photoshop doesn't support color profiles in png's.
But now I have a great one.this is with the correct color profile and displays correctly in firefox and probably other browsers -- also displays correctly on windows desktop and in large-icon view.
Ok, grab that image and try to read it into photoshop..I do, and get no warning on profile mismatch like I do on jpg's or tiff's:photoshop strips the existing profile and adds sRGB which isn't the correct profile. This is how photoshop transforms good colors into bad:
Completly screwed up.I have had multiple people notice how my png saved images from photoshop had "off" or bad colors -- usually washed out in comparison w/my monitor profile.I can get 'ok' results if I flatten the image and *convert* my existing profile to sRGB -- and I usually get something that looks 'acceptable'...though the jpg's render in accurate color.
Basically, photoshop can't read or write png web images. and maintain color fidelity unless they have no profile. Even if they have an sRGB profile, I usually get washed out looking pics if I don't strip it but let adobe convert it.
In googling for my own problem, I found references to this problem in Adobe Photoshop going back to 2002.They could fix it with a file plugin for existing CS5-6 users, but it really needs to get fixed and Adobe needs to stop ignoring this problem.I find this extra depressing because I prefer to distribute my pictures losslessly in png, but with photoshop, I'm left with lossy jpegs to get accurate color reproduction.
View 22 Replies
ADVERTISEMENT
May 27, 2009
Although the following is usually discussed in conjunction with Multiple Monitors, I believe it may be relevant in some single monitor environments as well.As far as I can see, PS CS4 uses the Windows XP Default monitor profile (Display Properties > Settings > Advanced > Color Management) as its Monitor Profile (just to be complete here, in the absence of any entries under Color Management, PS uses the sRGB space as the Monitor Profile). I have not been able to find any other way to control which monitor profile PS will use.Hardware monitor calibration tools, as well as the Wincolor applet, make it possible to load the LUT on the fly, but neither my Spyder3 Elite software nor Wincolor actually update the Windows Default monitor profile definition. This means that without manually making the change in the Windows Color Management section, there is no way to tell PS to use a particular monitor profile, thus making it impossible to create a correct relationship between the LUT contents and the PS monitor profile.Making the manual change to Windows is not only tedious, but also makes it essential to REMEMBER to do this every time there is a to be profile switch, which may be necessary due to using one's laptop with different external monitors in different locations, or even just different profiles to compensate for varying ambient light conditions (e.g. one profile for natural daylight, another for artificial lighting at night).Contrary to several comments I've encountered in various posts, I am not able to assign a different Default profile to each monitor at the WIndows level. Perhaps this is possible with some video cards/software, but not with my Nvidia GeForce 8400M G and the latest software.
View 8 Replies
View Related
Sep 5, 2006
I have to treat a few images for a newspaper, and I have to apply an specified Color Profile for them.
what's the difference between the commands "Assign Color Profile", "Convert to Color Profile" or doing "Mode>CMYK, and then Assign Profile",
View 9 Replies
View Related
Sep 30, 2013
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
View 2 Replies
View Related
May 31, 2013
Seen this error message, 'Organizer does not support color space in the file'?
View 1 Replies
View Related
Jul 27, 2013
I'm about to make a significant investment in GPU and monitor if LR5 supports 10-bit color.
View 3 Replies
View Related
Feb 9, 2013
if Lightroom supports 10-bit color. I know it supports ProPhotoRGB and 16-bit image files.
View 5 Replies
View Related
Mar 23, 2012
I wonder if there's a support for 30 bit color-capable displays (with compatible graphics card and driver, of course...) in Lightroom 4...
I have a NEC PA241W monitor and FirePro 5800 graphics card at my workplace --> which work well with 30 Bit color depth in Adobe PS CS5.0.4.
Since Lightroom 4 requires an "OpenGL 2.0" compatible graphics card it's obvious, that OpenGL is used now (I think LR3 didn't..?). If LR4 is able to handle 30(48) bit color depth(?)
View 1 Replies
View Related
Feb 3, 2011
I'm a GP2 modder and as of now I'm using just PDN for edeting cars and stuff. GP2 has its own pallette of 256 colors.
Is it possible to load a *.pal-file into PDN? And is there a awy to expand the color-pallette shown in the color window? Is it also possible to save .*bmp with one special 256 pallette?
View 2 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Sep 20, 2013
I'm using Photoshop CS6 on Windows 7 Home Premium. I use Photoshop in conjunction with Lightroom 5.2. When I send an image from Lightroom to Photoshop, and then convert the profile from Photoshop,
I expect to see the option sRGB IEC6196-2.1. If I open the 32-bit version that option is there. However, when using the 64-bit version (which I have been using exclusively) I just recently discovered that the profile isn't there. Photoshop is suggesting converting to eSRGB instead, and the other profile isn't even in the list of available profiles. My printing both at home and from labs is acceptable as far as matching is concerned. But I'm wondering why I don't have that profile. Is there a way to add that profile to the list?
View 2 Replies
View Related
Sep 12, 2003
I re-installed Photoshop 7 after formating my PC and the first time i used it, a window appeard regardding some embedded color profiles. I choose an option without reading it carefully and now everytime i open an image the program asks me if i want to assign a color profile to the file or if i dont want it to color manage. Re-installing it again isn't helping and i can't find any way to arrange this problem.
View 1 Replies
View Related
Sep 17, 2012
I am using Photoshop CS6 13.0.1 x64 and I can't seem to get the settings for a new document to stick.
When I make a new document my color profile never matches my color settings (RGB: Adobe RGB (1998); CMYK: U.S. Sheetfed Coated v2; Convert to Working RGB; Convert to Working CMYK; Ask when opening), it always is reset to sRGB. Also, when I create a new document it doesn't seem to remember either what I used last or what is in my clipboard - it always resets to 1 x 67.
Is there some hidden setting I'm missing?
View 1 Replies
View Related
Jun 6, 2013
the new Photoshop Update CS6 13.0.5 changes the monitor color profile! Also brushes in Camera Raw are not availabe any more!
View 8 Replies
View Related
Aug 13, 2007
Since I've updated to a 22" LCD Screen I've run into a problem, and Im not sure exactly what is causing it. I'll do my best to explain the circumstances.
The problem Im having is managing the colour between what Im doing in Photoshop, and what is being produced on the web. For some reason, the brightness/gamma I have in photoshop is higher than what is being saved for web.
For example, Im working on a PSD file, get the brightness, saturation to exactly where I wanted it, then go "save for web" and as soon as the save for web dialog comes up. It's much "darker".
Here is a screenshot of the photo in photoshop, along with the image saved on the right in firefox.
I've checked the "Color Settings" in Photoshop, and the RGB profile is set to SRGB.
Now most people who view the photo, say it is "too dark". So im assuming that most peopels monitors view the image as too dark. So I need photoshop to view the image as "too dark", so I can tweak the brightness etc so that it becomes correct for most monitor.
Why would photshop show it slightly brighter, as soon as I hit "save for web", the colour Im seeing in the preview window is already "too dark".
It's almost like my default ICC profile is chagned to be too bright. Any help would be appreciated. I think when I installed my graphics card drivers, then Nvidia also ran a color profiler. I also insatlled the monitor drivers for my widescreen.
View 3 Replies
View Related
Dec 12, 2008
I use AdobeRGB1998 color profile for monitor and Photoshop.
When I have calibrate monitor I must use new color profile?
View 2 Replies
View Related
May 30, 2005
How can I preserve my colors so that when I export them to images, they are as close to the colors as I see them as when I view them in a browser?
Right now I'm using:
Adobe RGB 1998 for RGB Colorspaces (Preserve Embedded Profile)
Engine: Adobe ACE
Intent: Relative Colorimetric
[X] Use Blackpoint Compensation
[X] Use Dither (8bit/channel images)
View 3 Replies
View Related
Feb 9, 2013
So My wife and I got two new laptops (Toshiba Qosmio X875) after getting everything installed my wife noticed that all the images she has edited and uploaded (old and new) appear differently than they do in the editor. The color profile is set to RGB as I've read that's where it is supposed to be. She gets the same results when using Lightroom 4. I inserted a side by side screen shot below and you can see a difference where they should be identical.
View 1 Replies
View Related
Jun 12, 2012
I want to select the eciRGB profile as my default Working Space Profile. But in PS CS5.1 (Mac) I can select the predefined profiles only. I can't select 'other' and browse for the .ICC profile file.
How can I change it to eciRGB? Put all files into ColorSync folder and into Application Support/Adobe/Color..
View 2 Replies
View Related
Nov 10, 2012
Just installed Adobe Master CS6 on new installation of OSX Mountain Lion. Installation is ok but when i start Photoshop the color profile of monitor change (become more "cold").
View 3 Replies
View Related
Mar 9, 2012
having problems getting consistent archival inkjet prints from the places I have tried. I am now looking at 'soft proofing' which I suspect is not without its pearls. The problems I experienced before where the images were not converted to the correct profile was that sometimes they would print out,
at great cost correctly and sometime they would not, again at great cost. If the image is converted to the correct colour profile, in this case Hahnemule, will the embedded profile that the image will be printed out consistently and 2 different days?
View 7 Replies
View Related
Nov 12, 2013
I have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.
View 10 Replies
View Related
Feb 20, 2012
I have recently purchased LG IPS225V Flat Screen monitor and installed CS5 trial version. But as I try to run it I get an error message that the "LG IPS225V monitor color profile is corrupted, run the calibration wizard" and then there are two buttons labelled: "Ignore Profile" or "Use Anyway". This is a new monitor and it is considered to be providing the best factory calibrated color.
I have other free editing programs like Picasa 3, Pain.net etc.
View 12 Replies
View Related
May 25, 2012
I've seen this question asked here and elsewhere, but without any resolution, and can't find any mention in the documentation.....I customized Illustrator's color settings thusly:But when I save the profile and try to load it in Photoshop, it throws this error:
"The color settings file contains settings that are not supported by this version of Photoshop running on this system. These unsupported settings will be reset to their default values."
Then if I close the dialog box, re-open it, and manually choose the same settings, it seems to accept it. Here is what Photoshop currently shows:
what's going on? I'm running the CS6 Master Collection on an Intel quad core with 8 gb RAM and an nVidia GeForce GTX 550 Ti (2 gb PCIE 2). OS is Win 7 x64.
View 1 Replies
View Related
Nov 18, 2012
I have a hardware/software monitor calibrator to calibrate my desktop PC monitor for Photoshop work. However, when I transfer these photos to my phone, they display with an ugly color tint.
Is there anyway to display photos correctly on a cellphone or tablet that cannot be calibrated? In theory, it should be possible to generate a color profile for the phone/tablet and store the profile on a PC. Then I can convert photos to this color profile in Photoshop before transferring to the phone/tablet.
View 2 Replies
View Related
Feb 20, 2013
I get different results when converting to the same color profile before and after converting to smart object.Do the following:
1. create a cmyk document with color profile 'Euroscale coated v2' and fill the document with the color 86, 32, 14, 0
2. change the color profile to 'Euroscale Coated v2' -> the values change to 73, 29, 16, 0, no color change on the monitor
3. create a smart object -> the values stay the same, no color change on the monitor
4. create a second document like in step 1
5. create a smart object -> the values stay the same, no color change on the monitor
6. now change the color profile to 'Euroscale Coated v2' -> the values stay the same, this time we have a color change on the monitor.
View 7 Replies
View Related
Jul 14, 2004
I try and open any of my old images (or new ones for that matter) I get this dialog box:
The document "Architecture.jpg" has an embedded color profile that does not match the current RGB working space. The embedded profile will be used instead of the working space.
Embedded: sRGB IEC61966-2.1
Working: Adobe RGB (1998)
View 5 Replies
View Related
Aug 12, 2009
just got a new PC with Vista, hooked my Epson 1280 printer and it works fine,however, in Photoshop print dialog the printer does not show up in the printer profile drop down menu. I downloaded the drive from Epson installed it but still no profile for the printer,
View 7 Replies
View Related
Feb 5, 2008
I just installed CS3 in Windows Vista Ultimate x64 on my PC and I have my working color space set as sRGB. The color is dull when opening documents in any Adobe application with the working color space set to sRGB. The color is fixed if I change the working profile to my monitor profile which is "Monitor RGB - Dell 2407WFP-HC"
When in the "Monitor RGB - Dell 2407WFP-HC" profile whenever I open an existing file Photoshop alerts me that the embedded color profile is different than my working profile (all of my existing files are managed as sRGB and on my previous computer the sRGB profile looked perfect.)
Photoshop I could theoretically live with but the same problem occurs in Acrobat and changing the "Working Profile" in Acrobat has no change on how the sRGB managed PDF is being displayed. The same PDF will look fine on another computer.
How do I get sRGB color to display correctly in Adobe applications and not look dull and muted?
Additional Information: The problem is still prevalent when accessing the computer with Remote Desktop which leads me to believe it has nothing to do with my monitor or the video card I am using.
View 36 Replies
View Related
May 12, 2013
I've looked and looked, and even Googled. how to change the default color profile when you start a New image file? In CS5 mine defaults to sRGB (Under the Advanced drop down) but my CS6 is ProPhoto RGB which means I have to change it manually nearly every time I paste an image copied via right click in a web browser.
View 8 Replies
View Related
Oct 8, 2012
Steps to reproduce:
1. Take a screenshot of something in your web browser (macintosh CMD+SHIFT+4) to the clipboard.
2. Select File > New from the menu. Clipboard should be the selected Preset.
3. Notice how in CS6 the color profile under "Advanced" is "Display" and NOT "sRGB" — in CS5 it is sRGB.
4. Paste from the clipboard into your new document and get the color profile mis-match warning if you are in CS6.
It is either not picking the color space of the clipboard properly like it will in CS5, or I am missing something somewhere.
Nothing I do in an attempt to fix this is working. I have sRGB set as my default profile in color settings, and nothing I do changes this setting for the "Clipboard" preset.
I am getting sick of forgetting to manually select "sRGB" every time, opening up a new document sized to my clipboard and then getting the color profile mismatch warning when I paste in the clipboard contents!
I take so many screenshots as I develop websites this is a CONSTANT problem as I am constantly creating new documents from the clipboard to check alignments, zoom in to get color samples, and many other reasons.
View 7 Replies
View Related