Photoshop :: Default Brushes Incorrect?
Apr 22, 2009
I've recently installed CS4 on my new Vista machine. After setting up my Wacom tablet, installing all the appropriate software I find Photoshop is not responding to me pen sensitivity as it has on my previous machine (Mac with CS1). Specifically I'm thinking the default brushes are incorrect, specifically I use the hard brush that by default should go from small - large- small. Thinking I was missing a setting I compared both side by side and sure enough my settings for default brushes are the same on both machines but I'm not getting the dynamic brush that I had on my Mac. Below is a screen shot I found online of what i'd like to have in my setup. in yellow is where I'd like to get to but at the bottom of the image is where I'm at currently. Any help would be appreciated. I just know the solution is going to be so simple that I'll bang my head on the desk when I get it.
View 6 Replies
ADVERTISEMENT
Mar 23, 2012
Whenever I attempt to print, I get the warning message below referring to a printer that I do not have. Â I presume it's an AutoCAD default setting, but I cannot find any place allowing me to change this default. Â It eventually prints, since as the warning message says, it then substitutes my Mac's default printer, Is there any way to change the AutoCAD setting.
View 2 Replies
View Related
Feb 14, 2003
how do you get your default brushes back? I just got sets of new ones, which I was adding them at the time, and I accidently replaced my old ones. I tried uploading all the files that I could, but I never got those Circle brushes back. I may have missed one, I was able to get the Square brushes, but not the ones that PS(7 in this case) came with. Are these in the same brushes folder? Do I need to download them to get it back?
View 1 Replies
View Related
Apr 13, 2009
I'm using CS4 and am searching for a particular brush - Oil Medium Wet Flow. This brush is already loaded in my pallette but I cannot find out which Brush set it belongs to. Someone asked where the brush is located but am unable to answer, and have spent quite a bit of time looking for it. I have downloaded many brushes so I have a huge list, but I know that it is a default brush. I wondered if there is a list of the default brushes available as I've trawled the internet to find one and so far haven't been able to. What I'm looking for is something that gives me each default brush set and the sub-category of individual brushes within. For example, Assorted Brushes, then all the brushes within that group. It would be really nice to have a list of these I can refer to without having to select the brush set first. Also, is there any way of knowing where brushes are from that are loaded in your pallette?
View 16 Replies
View Related
May 3, 2005
find new brushes? Isn't it great when you actually get them installed? Isn't it also great when you are worried about how to get back to default brushes when you're done using the new ones? lol Yeah, I'm still new to the Photoshop thing, and still have a lot to figure out. So, can anyone tell me how to use the new brushes I've downloaded, and also how to get back to the default brushes?
View 5 Replies
View Related
Sep 14, 2012
Twice now, upon a restart of my computer, Photoshop has reset to factory settings, and deleted all my custom brushes I've made since a particular point in time. I've had to remake some brushes for my digital art course twice, and now I'll have to do it a third time. This is EXTREMELY DISTRESSING...
 This started happening only recently. I can only guess perhaps an update to Windows or something has really jerked up my Photoshop, not sure.Â
View 2 Replies
View Related
May 25, 2013
Basically, there you can see a selection of default brushes, and how some of them appear like just small circles, rather than a smooth, hard round default brush like they should. The second one is the one highlighted in the window.
Â
When I use other brushes with my Wacom Bamboo they too look just a bit less effective than they used to. I don't want to reinstall
View 9 Replies
View Related
May 22, 2013
so i thought i was smart and created some new brushes. added them no problem (or so i thought) but to my dismay i cannot find my default brushes; the only available ones are those i created. did my saving the new brushes somehow delete the core collection?
View 6 Replies
View Related
Jan 13, 2012
I rarely use a green pepper in my work! I found the folder to add custom brushes but where is the folder that contains the default brushes. I am running the latest version of GIMP with Windows 7.
View 3 Replies
View Related
Dec 17, 2012
How can i save my own DEFAULT brushes? Everytime after starting illustrator i should correct brushes option.
View 8 Replies
View Related
Nov 15, 2012
Im sick of writing the value of brushes i want to use like example: brush size 10 or brush size 20 or brush size 5 or less..
Whenever i touch to adjust brush size by mouse it always is like this: brush size 334 or brush size 554.. Why it is so easy to pick 400size brush and almost imposible to pick 40 size brush?
Brush are? its like 500px wide.. since when small brushes are obsolete?? i never use bigger brush than 50! and most of the time i use brushes that are less than 10(value)
So its pretty important for me(i hope not only for me) to easily pick small brush sizes..
View 4 Replies
View Related
Jul 13, 2011
I want to delete the default brushes in Gimp, like the famous green pepper and others that I find not useful to me. I know how to do this but is there's a reason why the pre-installed brushes cannot be deleted with the brush editor?
View 3 Replies
View Related
Jan 30, 2006
I am interested in grouping and sorting brushes according to size, shape, whatever.
Right now when I add a brush library, they just stack on top of one another.
For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?
I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?
View 3 Replies
View Related
Aug 1, 2012
How do you rearrange the brushes in the brushes box?
I've seen they are arranged by name, so how do you rename the brushes since renaming the file name don't rename the brush.
View 2 Replies
View Related
Feb 20, 2006
I seem to have a colour problem with PSD files. I have tried messing around with the gamma settings for hours, colour profiles and everything else I could think of, but I cannot get rid of the problem.
As you can see the colour problem is only with PSD files. I have also taken a screenshot and compared the colour of the windows taskbar, and the PSD gives me a washed out, less bright look, yet upon export to JPG it looks fine...
View 2 Replies
View Related
Sep 12, 2013
I have photoshop CS6 on a macbook pro retina display. When I open an image that is 8MB in finder, photoshop says that it's 143MB.I did not change anything, just opened the file.
View 7 Replies
View Related
Jan 23, 2013
There is a noticeable difference between color values specified in Pantone books/Color Manager and CS6. For instance, the correct RGB value for Pantone 158 CP should be 228/126/26, whereas Photoshop's RGB value for the same color is 245/127/41.
Â
I have a subscription to Creative Cloud and all applications are up to date. When will this be fixed?
View 16 Replies
View Related
Jul 27, 2008
When I Open or save an image in Photoshop, It tells me the image is a certain size. However if I then look at the image size in windows or any other program it is substantially smaller. (maybe half the file size)
If I reopen it in Photoshop it says its the large size again.
View 2 Replies
View Related
Nov 22, 2013
I have Adobe CS6 Design Standard student and teacher edition. The package includes Photoshop CS6, version 13.0.1 x64. In Photoshop CS6, when I bring up the Select Color Range dialog, I see the correct dialog box, but the main image of the photo on my screen changes to a black and white display that looks like the preview of a color range mask in the dialog box, instead of the normal full color image I should see. This occurs whether or not I have yet made a selection. Here is a screen photo of this incorrect display:Â
Â
This problem does not occur when I use Photoshop CS2 on the same computer. Here is a photo of the correct display in Photoshop CS2:
Â
On November 20, I spoke with an Adobe support person on the telephone. I was unable to describe the problem in a way that the support person could grasp, and the case No. 0184920291 description is now listed as "effect doesn't come with color sliders". It is impossible to use the selection eyedropper to select a color from an image displayed as a monochrome mask.
View 3 Replies
View Related
Sep 15, 2013
PS CC update ended with Update Failed. Now cannot start PS CC. POPup says could not complete your request the internal signature is incorrect. Â
View 3 Replies
View Related
Jun 23, 2013
I'm trying to use the Image Analysis functionality of PS CS6 to obtain brightness levels from an image.
Â
To test the "Gray Value" measurment, I've created 11 patches from 0%-100% in 10% increments. I used the fill tool (Shift-F5) and specified values using H=0, S=0, B=<percentage_value (0-100)>.
Â
The respective RGB components of the generated patches are exactly as expected (255*percentage_value).
Â
The measurements obtained through "Record Measurement", however, do not agree, with the exception of the 0% and 100% extremes, which are reported with 0 and 255, respectively.
Â
Inbetween, there is disagreement which rises from 0 @ 0% to the highest (5 @ 50%) to then decrease again to 0 @ 100%.
Â
Here is the series by which the reported Gray Values are too low (from 0% - 100%): 0, 3, 3, 4 4, 5, 3, 3, 2, 1, 0.
Â
How come?
Â
I've tried removing colour profiles (to exclude gamma encoding issues) and using different colour spaces and/or models, with no change in behaviour.
Â
All my patches are pure gray so there shouldn't be any problem with unexpected colour weighting.
Â
One funny observation I've made is that even though the patches are a 100% homogenous, PS reports different miminum and maximum values. For instance for the 50% brightness patch (RGB triples of 128, 128, 128), the report is MinVal=123, MaxVal=124, MeanVal=123.934809.
Â
Clearly, the value for all three aspects should be the same, and I expect the value to be 128.
Â
I'm using PS CS6, Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32, on Win 7.
View 2 Replies
View Related
May 30, 2013
I have another problem now, I have purchased from Adobe the upgrade for CS6 but when I try to download it says I do not have the correct version of Internet Explorer and yet IE is telling me I have version 10 - I also have windows 8 and since Adobe doesnt like IE I have downloaded Mozilla but I am still unable to download.
View 3 Replies
View Related
Jun 3, 2013
Importing a file in RGB and converting it to CMYK values ​​are different estremamante performing the same operation in photoshop. The setting of the color profiles is the same and also varying the options Microsoft ICM CMM in color management, keep varying the pure black and gray to black colleague CYMK, does not improve anything. The conversion in coreldraw is too much dark and this is a problem. How is it possible?Here the setting of CorelDraw and Photoshop.
View 14 Replies
View Related
Oct 6, 2004
my adobe photoshop cs came with my laptop so i didnt have to install it or anything.. but now when i try starting the program error messages come up and the program shuts down
DLL- an attempt was made to load a program with an incorrect format
then; Adobe photoshop : a required application library failed to load nd the product cannot continue. please reinstall the application
View 1 Replies
View Related
Sep 8, 2012
I have Photoshop Elements 10.0, I use this software from version 6, but after installation of latest release (10) I have this problem:
Â
when I use IMPORT FROM -> CAMERA MEMORY
I ever selected CREATE SUBFOLDER WITH DATE OF CAPTURE -> FORMAT aaaa mm gg
Â
Now I have the same confguration but the program saves an incorrect date so it puts aaaa gg mm also if I selectd aaaa mm gg
Â
The weird thing is that it renames correctly the single picture so aaaa mm gg is really aaaa gg mm
Â
This is a very big problem because I must rename every single folder manually.
Â
I think that this is a bug of the program (it happens now on a new pc and before on another pc).
View 3 Replies
View Related
Sep 30, 2013
I ran the update function on Friday, and I think the download might have gotten corrupted. Today, Monday, when I try to start the program I get only a little window with this notice:
Â
Could not complete your request the internal file signature is incorrect.
Â
The dubious grammar doesn't bother me so much as the fact that the Creative Cloud window tells me that I'm up to date. I don't know how to get a new download to replace the bad one I probably have.Oddly, the 32 bit version of CC works fine. 5.1 still works, too.
View 3 Replies
View Related
Sep 23, 2012
Ps CS6 v13.0.1
OS X 10.6.8
Â
Problem: Ps CS6 incorrectly renders vector objects pasted from Adobe Illustrator. CS5.1 does not exhibit the problem.
Â
Below is screenshot of artwork in Illustrator and which is copied to clipboard, followed by screenshot of "Paste as Smart Object" in Ps CS5.1 then screenshot of same paste in CS6. "Paste as Pixels" gives identical good rendering in CS5.1 and poor rendering (gray pixels which should be pure white in this example) in CS6. This is repeatable with other artwork.
Â
Several weeks ago there was a complaint in this forum that Photoshop CS6 poorly renders vector artwork that is pixel-aligned in Illustrator. The Adobe response was that Photoshop is correct. Strange that CS5.1 can render pasted vector artwork perfectly and only CS6 makes a mess.
View 5 Replies
View Related
Oct 29, 2013
I tried to launch Photoshop cc, but this time instead of lauching, it stated this "could not complete your request the internal file signature is incorrect". I have used this program many times and now it has stopped working.
View 1 Replies
View Related
Feb 7, 2013
How can I remove a people tag from multiple photos at one time in PSE11. If I select two or more photos, then the people are no longer listed in the "image tags" info area, and the right-click menu does not list them under keyword tags to remove, it only shows "add person" not "remove person." This happened when many photos were accidentally tagged with a person not in the photo.Â
View 2 Replies
View Related
Nov 20, 2013
I have many slides, scanned over the past 10 years, with duplicate file names and filed by date. I converted my Elements 9 from PC to iMac and many incorrect connections occured. Is there a way I can correct these connection errors? This problem involves about 5% of my 25,000 photo files.Â
View 2 Replies
View Related
May 14, 2013
I am using video studio X5 ultimate. I am importing video footage from a dvd. VSX5 has imported all of the files. When I get to the screen that asks what folder and if I want it inserted in the timeline, I keep getting an error message "The parameter is incorrect." It then goes back to the folder, and sits there and VSX5 is frozen. I have done this many times.
View 5 Replies
View Related
