I am using PS to create a bitmap for another tool (not PS) that requires shapes to be completely closed. I am drawing using paths and then stroking with the pencil. The problem is that a 45 degree line will be stroked like this with a 1px pencil: Code:
View 9 RepliesI made this custom hidden line, here is the defiinition:
*SCADA_FO_HL, - - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- - - -SCADA-FO- -
A,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,-0.4,0.2,["SCADA-FO",STANDARD,S=.375,U=0.0,X=1.0,Y=-.1],-5
It leaves a continuous line at the beginning and end of the line. Is there a way to get rid of that?
I have created 8 seperate files and i now need to link them together to make an 8pg pdf, how to do this?
View 1 Replies View Relatedhow to create a continuous image when placed with the left end next to the right or vice versa.
This is for a header on a webpage, where i would like the image repeated across the top, one next to the other. I would like the image to be seamless, so it just appears to go on and on.
I have several images selected that are close to being able to be adjusted so that they will work end to end,
I am wondering if Autocad has some sort of function for creating quantities of continuous order text. Example: I have a grid for which each cell needs a label as such A-001, A-002, A-003..... etc.
I didnt know if there was any function within Autocad that serves as a text generator for something of the such.
Right now I have just copied the first Cell "A-001", pasted in all the other cells, and am individually going through and changing each number. This is a lot easier than generating text each time but it is still quite cumbersome.
Is there a tool where you just click on any line and it tells you how long the line is from end to end?
Basically I am drawing a curvy line that twists and turns here and there, but the line has to be less then so long. So I have to approximate the length by doing strait measurements and multiplying, it's really a pain.
I'd much rather just click the line, and it tell me how long it is from end to end, across turns and rounded edges and corners.
The pencil tool line thicness or weight is measured in cm. Is there a way to make it measure in pixels?
View 1 Replies View Relatedis there a function to add a continuous line border around a mtext box? currently i have simply been drawing a rectangle around the text, but this seems clunky.
View 1 Replies View RelatedSo, is it possible to create one polyline that has combined dashed and continuous type of line in one polyline?
View 9 Replies View RelatedI need to draw a thin white line across an image, infact several lines in different places. The lines need to be permanent. I want to key in the number of pixels for the the thickness of the line and if possible key in the position of the line. I know I can use a new grid line to position a grid line, but how do I then turn that grid line into a permanent line where I can decide the width and colour? I'm trying to refrain from the long way round of zooming up to 1600% and physically using the rectangular marquee tool then filling the rectangal with colour.
View 4 Replies View RelatedI have a problem with plotting my layout. When I plot, the lines from the xref are small tiny points/dots instead of a continous line. All other lines are OK. What could be the problem?
View 7 Replies View RelatedGetting rid of pencil icon with line through it - layers are not locked
View 7 Replies View RelatedOn a new transparent layer, I have drawn a straight line with the pencil tool. I select the Box Selection tool to select the whole line that I just drawn. I switch to the Move tool and made sure to move just the selection.
At this point, I would think that I would be able to move the line but only the box that is shown by the Box Selection tool moves. The line doesn't move at all. However, when I tell the Move tool to move the selected layer, the whole canvas moves, including the line. Why can't I just select just the line and move it?
I only have one layer in the document - it is not locked. I have already tried locking it, unlocking it, creating new layers, locking/unlocking those.I am not able to access Object>Unlock All.
I have done Hide All Layers/Show All Layers - so there is nothing hidden..I have even opened a previous project, and it has the same symbol on it and none of these methods of correcting it works either. It printed fine on Friday.
When I create an entirely new document, the icon is still there.
In Illustrator CS6, I would like to draw these trails for a map I'm making. Is there a way I can draw using the "Pencil" tool where when I draw, it draws a second line next to it? Is there a setting for that?
Here is an old map where you can see the double broken lines. I know how to set it so the line has gaps in it, but I need a line to be the same next to it.
you can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
Is there a way to make it so when you're drawing a line you can see how it actually will look like?
On paint it shows exactly how the line looks as ur drawing it,
but on Photoshop it shows some rectangle outline of the line.
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View Relatedhow to create my own line tools, specifically a dotted/dashed line.
View 5 Replies View RelatedIm trying to use my "line" tool and every time, its creating an arrow!
I cant get it back to a regular line for the life of me, and im about to throw my monitor out the window.
I search a function to automate this process (look at the picture below for an example) :
- I have a picture with a lot of black pixels
- I would like to group all black pixels which are separated by less than "X" pixels, to draw a continuous surface.
Maybe with Extend Script ?
Is there a mode that allows the clone stamp to, in a sense clone itself? So if the target goes over an area that you just brushed with the clone stamp it will actually begin to clone from that, instead of the document state prior to cloning?
View 2 Replies View RelatedI am running PS CC on Win 7 Pro, 64-bit and am 4 months into a one-year subscription. Ever since I started usiing the CC version (was using CS4 Web Premium), I have intermittently gotten weird startup messages like "You have 0 days left on your trial (?) version", "You have only 65535 days left on your trial version", "You need to register/activate your trial version" and "This Adobe ID has already been used to activate the software on two other computers".
Earlier today, I ran the Abobe Cloud app on my PC and updated the software (Abobe Cloud only, not PS CC). Ever since then, I get a continuous "This Adobe ID..." message -- I can't get into PS CC at all. And, by the way, the "two other computers" part is completely bogus -- I have activated it on one computer only.
Note: I live in an extremely rural area, up in the mountains with not exactly the fastest internet service (total bandwidth for the entire community is 20 M-bit), which may be giving the Adobe software indigestion, I don't know...
I get Photoshop 9.01 CS2. My CPU is AMD 2500+ running 2.4 Ghz and i get 1 Gb of RAM.
If i draw a line with a small angle, like 3 or 4 degrees, the result lookslike a STAIRCASE! A staircase with small steps!
I observe that Photoshop have a tendancy to make straight line so when i do my angle it does a very small staircase.
Why is that? CPU is slow ( do not think so; runnuing 2.4 Ghz) My mouse is not precise?
I would like to get more advanced and creative with my creations. basically when i think AutoCAD i think lines so a nice short program to get started with is to create a line between two point (or simular). The tutorials online are wofel in learning the basics such as this is, need few starters on how to achieve this
View 4 Replies View RelatedI am using a plane for my zero lines in my assembly drawing. For my customer to complete the approval drawings i need to dimension to it.
View 2 Replies View RelatedHow can create in vba with line type ?
View 4 Replies View Relatedhow do you put a “>”. I’m trying to make a linetype that looks like -> -> -> i know 2,(but i don’t know what goes here),-2
View 7 Replies View RelatedEvery time i make a JPEG image it comes out with a thin white line at the bottom and left side of the image (kinda looks like a border line). Is there any way to take that off? I can't seem to make a seamless black pattern with those lines there....
View 1 Replies View RelatedUp to now, I have been unable to find a tool within PSPX3 to do the following:
Suppose I have loaded a .JPG file into PSPX3. Now I want to draw a smooth curve on this picture by picking a suitable set of points in the picture that will be connected smoothly with a nice curve. All I am able to perform is drawing a somehow ragged curve by (approximately) moving the cursor along the envisioned curve, but this ends up just looking awful. From my math studies, I remember something that is called a (B-)spline curve. Is there any version of PSPX... that allows (B-)spline curves? Similar/easier: simple polygons?