Photoshop :: Creating New Line Tools
Apr 8, 2003how to create my own line tools, specifically a dotted/dashed line.
View 5 Replies
ADVERTISEMENT
Photoshop :: Tools For Creating Poloraoid/printed Like Effects
Jul 12, 2007I have a bunch of images that I would like to make look like crinkled photos or poloaroids, with drop shadow and aged effects. Anyone know of any tools that can speed up this process?
View 1 Replies View RelatedAutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Inventor :: Creating ICopy Tools
Oct 9, 2012I want to make some icopy tools to suit my needs, i did the tutorial i've found on AUGI "an icopy how to" and then i did a glass panel using the technique i learn there. Everything works fine until i place the icopy on a different plane than the x, y plane.
when i place it in other plane it the icopy behave in strange way. I had this problem since the first icopy test i made and i can't find why it doesn't work.
Photoshop :: How To Draw Lines Across An Image? [Pencil/Brush/Line Tools]
Feb 20, 2008I need to draw a thin white line across an image, infact several lines in different places. The lines need to be permanent. I want to key in the number of pixels for the the thickness of the line and if possible key in the position of the line. I know I can use a new grid line to position a grid line, but how do I then turn that grid line into a permanent line where I can decide the width and colour? I'm trying to refrain from the long way round of zooming up to 1600% and physically using the rectangular marquee tool then filling the rectangal with colour.
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Creating A Line On A Line
Apr 8, 2011I'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View RelatedAutoCAD Civil 3D :: Profile Creating Tools (Splines )
Oct 4, 2013I try to create my Vertical Profile using "Convert using AutoCAD line and spline" but spline option is not working.
I recreated as spline>cv>Degree (2) quadratic. The Civil3D is not accepting.
I'm doing something wrong? Use another procedure?
AutoCAD 2010 :: Creating Custom Tools In 2012
Aug 2, 2012I'd like to create a new Menu which will contain few custom tools (ie. place text with particular font type, scale and justification)..I tried to import my customized menu from AutoCAD 2007 but that wasn't successful.
View 2 Replies View RelatedAutoCAD Civil 3D :: Grading Tools - Creating Proposed Grade Surface?
Feb 21, 2013I'm trying to create a proposed grade surface using the grading tools. I drew the outline boundaryof the proposed surface as a closed polyline then created a feature line from it and assigned different elevations to it. When I try to select the feature line in order to create the grading, I get "THIS FEATURE OVERLAPS ITSELF AND CANNOT BE GRADED". What could be a possible reason for this?
View 5 Replies View RelatedAutoCAD Express Tools :: Why Can't Draw A Line
Jul 11, 2013My question is: Why certin AutoCad files, I'm not able to draw lines?
I'm in model space. I can move objects. I can even erase/delete things. But I'm tring to edit this shop drawing, i need to add some details, so i need to draw some lines. I use the "l" command. Select my 1st point, then 2nd point. It doesn't work? The Command line keeps saying: Specify next point or [Close/Undo]. But no lines are getting drawn. i finally have to hit escape to end the line command but no lines have gotten drawn. its the same thing if i draw a square or circle. (Not sure if you need to know this but these are my companies files created by a former employee of my company using our own AutoCad. So, i would think if he's locked this file somehow, i should be able to unlock it.)
Paint.NET :: Ellipse / Line Tools Control
Aug 20, 2011Since the location of an ellipse is extremely difficult to predict, would it be possible to make the ellipse tool behave like the Text tool?
That is, when you have created the ellipse, have a 'handle' appear next to it so you could move it to the exact location desired. Maybe even a selection box that you could modify its shape and rotation as if you had selected it.
The other feature I would like to see is constrainment of all drawing tools (brush, pencil, color change) as is done with the Line/Curve tool. Hold the Shift key to keep the line straight.or is there some way in which these features already exist?
Illustrator :: How To Make Trend Line With Chart Tools
May 7, 2013Is there a way to make a trend line with the chart tools in AI? Specifically, a polynomial trendline. I am so disappointed with the apparent limitations of the chart tools available.
View 1 Replies View RelatedGIMP :: Command Line Tools For Extracting Layers From XCF File
Oct 17, 2012I have seen mention of a utility called xcf2png which can extract layers from a XCF file and write them to a PNG, but it seems there is no Windows version.
Any way of doing this under Windows/DOS? I just want to extract a layer by name and write it to a PNG file with the same name as the layer.
Or even better - searches a XCF file for layers that (say) start with an underscore and exports only those layers to separate named PNG files.
AutoCAD Express Tools :: Line Properties No Longer Work (via Layers Or Directly)
Aug 31, 2010All of a sudden, though I've change nothing, my line properties are messed up, here are some of the issues
1) My line type no longer works (via layers or directly)
2) My text section within line properties no longer shows up in order to access 'text overide'
3) I can no longer change the line color.
Photoshop :: Can Artwork Made With CC Line And Box Tools Be Made Into Vector Image
Jan 15, 2013I have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedPhotoshop :: Creating A Continuous Line With The Pencil
Jun 19, 2004I am using PS to create a bitmap for another tool (not PS) that requires shapes to be completely closed. I am drawing using paths and then stroking with the pencil. The problem is that a 45 degree line will be stroked like this with a 1px pencil: Code:
View 9 Replies View RelatedPhotoshop :: Line Tool Always Creating Arrow?
Jan 27, 2008Im trying to use my "line" tool and every time, its creating an arrow!
I cant get it back to a regular line for the life of me, and im about to throw my monitor out the window.
Photoshop :: Can't Access Tools / When Click On Corner Of Individual Tools
Nov 25, 2012i have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies View RelatedAutoCAD .NET :: Creating Line Between Two Points
May 4, 2011I would like to get more advanced and creative with my creations. basically when i think AutoCAD i think lines so a nice short program to get started with is to create a line between two point (or simular). The tutorials online are wofel in learning the basics such as this is, need few starters on how to achieve this
View 4 Replies View RelatedAutoCAD Inventor :: Creating A Zero Line
Feb 11, 2013I am using a plane for my zero lines in my assembly drawing. For my customer to complete the approval drawings i need to dimension to it.
View 2 Replies View RelatedAutoCAD VB :: Line Type Creating?
Oct 20, 2011How can create in vba with line type ?
View 4 Replies View RelatedAutoCAD LT :: Creating Line Type
Jul 12, 2012how do you put a “>”. I’m trying to make a linetype that looks like -> -> -> i know 2,(but i don’t know what goes here),-2
View 7 Replies View RelatedCorelDRAW X4 :: Creating JPEG Without White Line Under It?
Mar 28, 2011Every time i make a JPEG image it comes out with a thin white line at the bottom and left side of the image (kinda looks like a border line). Is there any way to take that off? I can't seem to make a seamless black pattern with those lines there....
View 1 Replies View RelatedPaint Shop Pro :: X3 - Creating A Smooth Line
Dec 6, 2013Up to now, I have been unable to find a tool within PSPX3 to do the following:
Suppose I have loaded a .JPG file into PSPX3. Now I want to draw a smooth curve on this picture by picking a suitable set of points in the picture that will be connected smoothly with a nice curve. All I am able to perform is drawing a somehow ragged curve by (approximately) moving the cursor along the envisioned curve, but this ends up just looking awful. From my math studies, I remember something that is called a (B-)spline curve. Is there any version of PSPX... that allows (B-)spline curves? Similar/easier: simple polygons?
AutoCAD Civil 3D :: Creating A Line Table
Jun 3, 2013I am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
AutoCAD 2010 :: Creating A Line Type
Oct 23, 2012I am trying to create a new linetype. It is a simple linetype, made up of a continuous chain of capsules that I've attached here. I understand that linetypes require shape files and line definition files. However, AutoCAD isn't even telling me how to create the shape file(s) I need to begin making the linetype.
The capsule is .12 units long at its widest, and will need to connect end-to-end.
AutoCAD Inventor :: Drawing Tools Form User Tools - Ribbon Without Any Add-on?
Sep 10, 2012I instal form SDK User Tools because I need in Inventor Drawing Tools (Revision cloud). I do this install like on website Autodesk show and I didn't get it on ribbon. I do also registry of this plugin but I also didn't get it.
I used Invenbtor 2013 with servce pack.
CorelDRAW Graphics Suite X6 :: Creating Cut Contour Line?
Apr 10, 2012I am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedAutoCAD Civil 3D :: Creating Feature Line Between Two Red Points
Mar 26, 2012I have a problem about creating feature line. When I want to create feature line between two red points, another point come into being by itself (blue point). If you look at the file I have attached, you will understand well what I want to express. I cant make any changes on this point. I cant delete, modify etc.
View 4 Replies View RelatedAutoCad 2D :: Creating Smooth Transition Between Line Segments
Dec 19, 2013I am a first time Autocad user and have spent most of yesterday trying to work through this issue but am still not able to perform this. I have attached an image which on the lower part of the lines shows arcs with large radii which transition to parallel lines in the upper part of the image. Where the two meet there is an abrupt change in angle which I wish to have as a smooth transition from the gradual change in angle of the arcing lines to the parallel straight lines.
pic1.jpg
This is how the transition between the line segments should look.
Illustrator :: How To Get Size To Show When Creating A Line Or Shape
Jan 22, 2014Before, when I created lines or shapes in illustrator a small window would show the size of whatever I was creating. Now it does not show up and what the size is of the shape or line.
View 5 Replies View Related