I search a function to automate this process (look at the picture below for an example) :
- I have a picture with a lot of black pixels
- I would like to group all black pixels which are separated by less than "X" pixels, to draw a continuous surface.
Maybe with Extend Script ?
I am relatively new to the 3D modeling world and would like some tips and tricks on how to quickly model a staircase. I have posted a 3D pic of a particular one, that I done recently.
I would all-sow like to know how to model the bottom part of the stairs so that is is a continuous surface. Having trouble with modeling a curved surface and making it part of a solid...
steps.jpg
Does the action (look in .ipt file) shown in the attachment is appropriate and complies with the autodesk wikihelp?
Windows7 64b; GIGABYTE EX58-UD5; Intel Core i7 920 (2.66GHz)
DDR3 3x2GB Kingston, HD ST 750GB+320GB
NVIDIA Quadro FX1800 (1680x1050) + SpacePilot PRO
APDSUltimate 2014
So I need a starting point on how to draw on a curved surface.
[URL]
how to draw the "slot" I know in solid works i can "project" onto the surface and then so a cut.
i wants to draw a circle on a cylinder's surface[3D curved surface]. And that circle should be co-planer with the cylindrical surface.
View 7 Replies View RelatedHow do I draw ribs on a curved surface. Attached is model that I am working on and I need to create ribs on the curved surface in radial direction. How do I do it?
View 8 Replies View RelatedI made a 3D box shape in AutoCAD. I would like to draw a line on one of the surfaces of the box. Also I know you can use the the linear tool under Annotations to display dimensions of 2D lines. But I don't know how to do it so that it that shows the dimension on a vertical axis as shown in the picture below.
View 9 Replies View RelatedIm using AutoCAD 2007.
I have done a land survey showing a top of bank - and the bottom of bank, which ive then contoured by using Carlson Survey (AutoCAD engined).
Im trying to draw cross sections through my model that would obviously show the level of the surface.
The bank lines and contour lines are polylines.
Is there a mode that allows the clone stamp to, in a sense clone itself? So if the target goes over an area that you just brushed with the clone stamp it will actually begin to clone from that, instead of the document state prior to cloning?
View 2 Replies View RelatedI have created 8 seperate files and i now need to link them together to make an 8pg pdf, how to do this?
View 1 Replies View Relatedhow to create a continuous image when placed with the left end next to the right or vice versa.
This is for a header on a webpage, where i would like the image repeated across the top, one next to the other. I would like the image to be seamless, so it just appears to go on and on.
I have several images selected that are close to being able to be adjusted so that they will work end to end,
I am running PS CC on Win 7 Pro, 64-bit and am 4 months into a one-year subscription. Ever since I started usiing the CC version (was using CS4 Web Premium), I have intermittently gotten weird startup messages like "You have 0 days left on your trial (?) version", "You have only 65535 days left on your trial version", "You need to register/activate your trial version" and "This Adobe ID has already been used to activate the software on two other computers".
Earlier today, I ran the Abobe Cloud app on my PC and updated the software (Abobe Cloud only, not PS CC). Ever since then, I get a continuous "This Adobe ID..." message -- I can't get into PS CC at all. And, by the way, the "two other computers" part is completely bogus -- I have activated it on one computer only.
Note: I live in an extremely rural area, up in the mountains with not exactly the fastest internet service (total bandwidth for the entire community is 20 M-bit), which may be giving the Adobe software indigestion, I don't know...
I am using PS to create a bitmap for another tool (not PS) that requires shapes to be completely closed. I am drawing using paths and then stroking with the pencil. The problem is that a 45 degree line will be stroked like this with a 1px pencil: Code:
View 9 Replies View RelatedI get Photoshop 9.01 CS2. My CPU is AMD 2500+ running 2.4 Ghz and i get 1 Gb of RAM.
If i draw a line with a small angle, like 3 or 4 degrees, the result lookslike a STAIRCASE! A staircase with small steps!
I observe that Photoshop have a tendancy to make straight line so when i do my angle it does a very small staircase.
Why is that? CPU is slow ( do not think so; runnuing 2.4 Ghz) My mouse is not precise?
I have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.
View 4 Replies View RelatedIs it possible to change the linetype from continuous to -none-? I created a layer for inserting georef images, and the images all come in with a border line that is related to the linetype and lineweight of which i want neither - i don't want a border.
I tried changing lineweight to 0.00mm but cant find any way to turn off lines?
How can I enter continuous text that runs the entire length of a 8 min project. I know how to enter a title, but I need unbroken text narration.
View 2 Replies View RelatedIve recently been upgraded from a Laptop to a pc at work with windows 7
When working on drawings, some small some large some with xrefs in but after continued use on the same drawing everything slows down even simple commands like highlighting an object
Over the last few days my all my AutoCAD 3d orbit commands have become continuous orbit.
View 2 Replies View RelatedThe building I am working on is the shape of a jelly bean. The exterior glazing will be segmented and we are trying to make the building as dimensionally uniform as possible. IE 5'-0" Curtain Wall units. So each arc length needs to be perfectly divisible by 5'-0" and the transitions from one arc to the next must occur at a tangent point.
Eventually we will be developing the building in Revit 2013 but for now we are in ACAD 2013.
It doesn't happen all the time. But lately it is happening quite often in one particular project. The project is being preparred to be archived, although I'd still like to know what is happening.
All I'll do is close a timeline tab or move a clip on the desktop. Then I get the spinning beachball of death. It completely takes over the mac. At first I can slowly move my mouse around to force quit from the service monitor (have to keep it open all the time now). But if I let it go on for too long I can't move the mouse and the whole system hangs.
OSX 10.7.2
2x 2.93 6-core Intel Xeon
AJA Card Kona 3G
16B Ram
RAID5
Nvidia FX 5800 1536mb
The concept is easy, you have a picture of a supercell thunderstorm, and the goal is to get the supercell to rotate in the animation and make it look like its continuous motion. Something that doesn't restart from the beginning. It basically looks like the storm is rotating and continuing to rotate without restarting.
I have an example, not sure who the author is, so I haven't been able to contact him/her. I am hoping this is something you can do with a script or at least have a step by step instructions to replicate.
I have three contiguous splines. I'd like to make them one continuous entity, either spline or polyline. How do I do?
I've gone to Modify/Object/Spline and to Modify/Object/Polyline and neither seem to work.
i'm making an isometric drawing. so i use oblique command everytime i need to convert dimension oblique at 30 degrees. is there any setting that the default system gets to this oblique thing so the action of selecting Dimension> Oblique doesn't need to be repeated? just like we switch ORTHO on and off , is there a setting for oblique dimension on or off too? i'm using autocad 2010 LT
View 8 Replies View RelatedIs there a tool where you just click on any line and it tells you how long the line is from end to end?
Basically I am drawing a curvy line that twists and turns here and there, but the line has to be less then so long. So I have to approximate the length by doing strait measurements and multiplying, it's really a pain.
I'd much rather just click the line, and it tell me how long it is from end to end, across turns and rounded edges and corners.
I have attached a screen shot of my drawing to give an idea of what im trying to do. To the left are typical stairs and the three circles with a line through them are an attempt to make a post for a railing. The bottom and top cirlces are a bit smaller then the center one and i want to make a continuous sweep but nothing is working.
3D-STAIRCASE.jpg
dashed lines are showing as continuous in both model and paperspace the property tab shows the linetype as by layer when i click on the line and under the layers proper manager the linetype for the layer says dashed
View 9 Replies View RelatedWhy am I getting this kind of railing and stringer? How do i make the railing and stringer run continuous and smooth?
View 3 Replies View Relatedis there a function to add a continuous line border around a mtext box? currently i have simply been drawing a rectangle around the text, but this seems clunky.
View 1 Replies View RelatedI have a map which I devided to
3 layouts (scale 1:1 = 1)
+
1 layout where general map is shown (scale is 1:5 = 0.2)
On scale 1:1 I want line to be shown as dashed (same as in Model). But in scale 1:5 I want line to be shown as continuous.
how can I show dashed line as continuous in single layout. Which settings for layout must be changed?
I have a blade housing that requires a continuos radius around the profile. It is not a full radius. When I shell the blade, it looks like the raidius wants to continue. I was told I had to use two fillets and the particial radius will not work. However, the continuous radious in the customers requirement. Is there a way to shell this part correctly?
View 2 Replies View Related