Is it possible to change the linetype from continuous to -none-? I created a layer for inserting georef images, and the images all come in with a border line that is related to the linetype and lineweight of which i want neither - i don't want a border.
I tried changing lineweight to 0.00mm but cant find any way to turn off lines?
If they have addressed the issue of being able to generate feature lines as a continuous linetype, like when you turn on linetype generation in a polyline? I can't find it anywhere and I would have thought this should have been addressed by now! Real basic need for plan creation!
View 9 Replies View RelatedI am wondering if it is possible to make a linetype that is essentially two continous lines (Or small dashes lines) overlayed atop one another. The purpose for this is to create a shadow effect (we use this for text on aerial imagery). The bottom line would be a thick white/black line and the top line would be the opposite so it stands out.
View 1 Replies View RelatedI've currently create several layers and after i change in one of 'em the linetype from continuous to a "Dashed" , every new layer i made had a "dashed" linetype and when i tried to change it back to default.
View 6 Replies View RelatedI want to change my ground conductor from solid green to a dashed line (green is OK) on a set of drawings, but all the dashed linetypes I can find don't show up well at the scale that I've drawn the circuits. I can make them look OK by changing the linetype scale in the properties manager window, but there are a boatload of these lines in eight viewports; finding them all would be a major pain. They are all on a single layer, though, but in the layer properties manager I do not see a way to change the linetype scale for the layer. I could use the properties manager to make the change if I could select everything on the layer. Is there a way to do that?
View 4 Replies View RelatedI am using ACADE 2008 and VB.NET. I have a multitude of drawings that I am doing the same three and four operations on and would like to write VB.NET program to do it. I can get my selections set just fine, but my first problem is figuring out how to change all drawing entities color and linetype to "ByLayer". So far I have not gotten past changing just the color value. I have tried multiple variations on the following line without success:
myAcadEnt.Color = Colors.Color.FromDictionaryName("ByLayer")
I'm very new to AutoCAD but now I'm using LT 2014.
I'm trying to change my linetype from solid to hidden, and I've checked the properties, changed the linetype on my toolbar above, ensured the scale is set to 1, and zoomed in to make sure the scale is correct. I've unlocked all the layers, and checked all my different spaces to see if maybe there was a glitch that just wasn't showing the change in linetype. Nothing!
The properties for my linetype show me that the line is a dotted (hidden) line, but the line itself doesn't show as hidden.
I have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
In our Structural department, we use a layer called S-35-WALL-LB to denote a load-bearing wall, and what the guys typically do when they are on the sheet showing the floor above, is dbl-clk the VP to activate model space, open the Layer Manager and change the VP linetype to HIDDEN to show the afore-mentioned loadbearing walls as walls under.
way to accomplish this through a viewport...but instead of using the Layer Manager, use a lisp routine I can link to a toolbar button where all the user has to do is dbl-clk the VP, press the toolbar button, and either it will convert the default VP linetype (continuous) for S-35-WALL-LB automatically, or get the user to select an object on that layer and it changes the whole lot?
I can not get rid of the phantom2 line type in my drawings.
View 9 Replies View RelatedIn my xref drawing I changed the linetype of a swing to be hidden. After changing it in the xref and saving I go to my plot file and the swing is still continuous. Visretain is set to 1. The swing changes on all other drawing files except one.
View 2 Replies View Relatedi have a simple fence line type with "x"s....if i draw the line straight up or to the right it looks perfect. but if i draw it anywhere to the left then the Xs are off centered.
View 9 Replies View RelatedQuicker way to change the overall linetype scale than using the 'modify properties' dialogue box that comes with Autocad 2008? I've attached an image that specifically shows what I am trying to change, but I get tired of always having to scroll down in the box to find this variable. I would love to have something simple like the old DDCHPROP dialogue box (see smaller image). LISP routine or something where I click on the toolbar button, and simply change the overall scale without having to navigate through the native one?
2013-04-19_114756.jpg2013-04-19_114732.jpg
When applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies View RelatedHe has a survey figure that is too short to display the text in the linestyle. When I change the linetype scale for the object, it has no effect.
View 1 Replies View RelatedI need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies View RelatedIs there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...
Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?
Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..
I have a Lisp that I have been working on with some folks in the office, and i feel like i am close, but i am not getting the cigar. The idea would be to have the lisp allow the user to select a nested x-ref entity, and change the color and linetype of the selected layer, similar to the old "LAP" command (I know it is a dinosaur, but I still miss it). I seem to be doing swimmingly, code I have quasi-plagiarized. It seems to crap out where i try to pass the selected linetype back to the layer. I get the nastygram "Command: ; error: no function definition: GETLINETYPE" right after selecting the linetype from the dialog.
Code below...
x(defun c:CX (/ Sel EntList DataList cnt Num ClrNum EntData)
(if (setq Sel (nentsel "
Select object to change layers color and linetype: "))
(progn
[Code]...
HP Elitebook Workstation
Windows 7
I have too many blocks with specific layers inside.
develope lisp can change all to layer 0 but keep color and linetype as it is.
I will use this as a part of script to change multiple block.
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedI have existing multilines with linetypes set to byLayer, yet when the linetype on the layer changes, the Multiline linetype does not. Is there any way to get the linetype to change with the layer?
View 1 Replies View RelatedI have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.
View 4 Replies View RelatedIve recently been upgraded from a Laptop to a pc at work with windows 7
When working on drawings, some small some large some with xrefs in but after continued use on the same drawing everything slows down even simple commands like highlighting an object
Over the last few days my all my AutoCAD 3d orbit commands have become continuous orbit.
View 2 Replies View RelatedThe building I am working on is the shape of a jelly bean. The exterior glazing will be segmented and we are trying to make the building as dimensionally uniform as possible. IE 5'-0" Curtain Wall units. So each arc length needs to be perfectly divisible by 5'-0" and the transitions from one arc to the next must occur at a tangent point.
Eventually we will be developing the building in Revit 2013 but for now we are in ACAD 2013.
I have three contiguous splines. I'd like to make them one continuous entity, either spline or polyline. How do I do?
I've gone to Modify/Object/Spline and to Modify/Object/Polyline and neither seem to work.
I am relatively new to the 3D modeling world and would like some tips and tricks on how to quickly model a staircase. I have posted a 3D pic of a particular one, that I done recently.
I would all-sow like to know how to model the bottom part of the stairs so that is is a continuous surface. Having trouble with modeling a curved surface and making it part of a solid...
steps.jpg
i'm making an isometric drawing. so i use oblique command everytime i need to convert dimension oblique at 30 degrees. is there any setting that the default system gets to this oblique thing so the action of selecting Dimension> Oblique doesn't need to be repeated? just like we switch ORTHO on and off , is there a setting for oblique dimension on or off too? i'm using autocad 2010 LT
View 8 Replies View RelatedIs there a tool where you just click on any line and it tells you how long the line is from end to end?
Basically I am drawing a curvy line that twists and turns here and there, but the line has to be less then so long. So I have to approximate the length by doing strait measurements and multiplying, it's really a pain.
I'd much rather just click the line, and it tell me how long it is from end to end, across turns and rounded edges and corners.
I have attached a screen shot of my drawing to give an idea of what im trying to do. To the left are typical stairs and the three circles with a line through them are an attempt to make a post for a railing. The bottom and top cirlces are a bit smaller then the center one and i want to make a continuous sweep but nothing is working.
3D-STAIRCASE.jpg