i am doing some smoke photography and am attempting to colour the smoke. i would like to try a new method by adding a 'colours' layer below the smoke of another photograph, and to have the colours from this layer colour the smoke layer above. how do i do this?
View 9 RepliesI am about to change colour of the ferry pictured below to white. (I mean the colour of the lower part of the ferry should be all over the ferry), and I also want to remove the clouds on the upper part...
View 3 Replies View RelatedWouldn't it be handy to be able to colour guide lines individually? I notice there are some lines called smart lines but I can't find out how to show those. Apparantly they automatically appear when you draw but I haven't seen them yet (I'm using CS2 on Windows XP Professional - I've read that CS3 doesn't seem to want to show them).
View 5 Replies View RelatedHow do you give an arrow a colour of if it is big enough fill it with a colour.
View 6 Replies View RelatedThe RSS logo is, as we all know orange and has a nice gradient in it. Now, what I'm trying (and failing) to do, is to colour it so that I can get it to match any colour of my choosing. I've tried looking into "Match colour...", "Photo filter" and "Colour overlay" but to no aveil. I'm obviously barking up the wrong tree.
View 1 Replies View RelatedI want to do is colour in my scanned black-and-white images, but I have no idea where to start.
Basically, I'm drawing black-and-white comic strips, then scanning them in with the aim of colouring them on Photoshop. But first off, my scanner isn't great and it has left shadows that I don't want.
Secondly, it would be a brilliant help if Photoshop could somehow "recognise" which areas were black and which were white, so that all the black bits were the same colour black and all the white was really white rather than off-white in places. This would also help when it comes to filling in the colour, because I could then click "fill colour" (or whatever the appropriate command is) and it wouldn't just fill in a tiny pixel because it's a slightly different shade of white to the pixels next to it.
a while back I said I would provide something indicating how I colour line art, with a nod in the direction of the new shape builder/eraser tools.
View 6 Replies View RelatedExample simple dotted pattern. Is it possible to create swatch so that color can be easily changed afterwards.
Like I can create pattern brush, so that colour is changeable with any colour in my palette.
I hope I'm using the right terminology here... imagine a square drawn by Pen tool. A square with a stroke and fill. What I would like to do is to "none" colour two opposite sides (strokes) of the square while keeping the fill color inside. What is the best way (or any way for that matter) of doing this?
View 5 Replies View RelatedTrying to work with gradient mesh colouring the nodes and every few nodes I colour the selection stops working and i cant select the mesh. Doesn't matter if which selection tool I use or even the gradient mesh tool its still the same issue. I can see the mesh lines and when i click with any tool on the mesh lines will show up in black but i cant select it to see the nodes. The only way that i've found around this is to save the work, close the file and reopen it. It's starting to be a pain as im having to do this every couple minutes.
I've done all CS6 updates and still getting the same issues so now im stumped.
I cannot figure out why when I click on an object and attempt to change the fill colour in the swatch panel Illustrator colours the stroke and not the fill.
View 1 Replies View RelatedI want to make colouring book pictures for my students from photographs of themselves (want to see kids get excited about something - give them a picture of themselves to colour in). Right now I am using the cartoon filter, desaturating the image and then painstakingly selecting by colour, each greyscaled set of pixels and then cutting them so that in effect, the image becomes a traced black and white image. I am wondering if there is an easier way to do this - I have tried using the threshold and levels filters - but I find that it makes the image too pop-arty, like those Che Guevara type T-shirt graphics. Ideally I want to literally make the image look like colouring book picture or a stamp. Is there an easier way to do that without having to pick and delete the greyscaled parts of the image?
View 4 Replies View RelatedI need a tutoral for colouring in my pencil sketch, and I've already used Alpha Mask/Isolate Lineart on it. The problem is I don't know how to colour it in. I googled, but the results are pretty much all about Photoshop..
View 1 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
It looks like a thumbnail in center of layer with the box thing around it...And the paper I'm placing on is 12x12 or 3600x3600px.
View 2 Replies View RelatedI'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
Upon trying to open a line sheet i'm working on, photoshop tells me:
Problems were encountered reading layers
"..."
"..."
"..."
Because the layer is not a valid layer. Some layers will use existing pixel data.
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedIs it possible to lock a layer within a document and password protect that specific layer?
View 3 Replies View RelatedI made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
"could not complete your request because layer is not a vaild text layer" ?
View 1 Replies View Relatedi double click my layer (its a text) and it just select the text and the window doesnt appear what do i have to do
View 2 Replies View Relatedthe key functionality lost is the ability to use the previous layer mask for a new layer
View 1 Replies View RelatedI have a large psd. The bottom most Layer can be a background layer is it possible to flatten just this layer to make is a background layer as this may make the file size smaller. Im working in PH5 on a Mac.
View 2 Replies View RelatedI can do one or another, but both at the same time? It is annoying because a mask selection turns into layer selection when you select a second layer/folder.
View 2 Replies View RelatedI use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies View RelatedA link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
I'm trying to copy a portion of a graphic and put it on another layer while keeping it's exact location as to how I view it am I understanded?
View 3 Replies View Relatedthis is my problem:
Pic 1. I have an image I want to use as a background, however the image is not complete. I need a part of pic 2 to fullfill it.
Pic 2. The colors around the object doesn't match the colors of Pic 1.
Normally it would be best to cut the object out. However in this case it wouldn't look nice (the object is mixed out (in color) with the rest of the image). If I cut out something the object won't look "proper".
My question:
How can I blend pic 2 on pic 1, using the original object from pic 2 (as it is), and at the same time blend the colors around it, so that it matches that of pic 1 / or simply remove it somehow?